AATA SR1750 HE User manual
Manual Stair Robot SR1750 HE
AATA INTERNATIONAL B.V.
Manual Stair Robot SR1750 HE
Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
Stairrobot
Type number : SR 1750 HE
Serial number :
Year of construction : 2001
Owner :
Manufacturer :
AATA International b.v
Willem 2 straat 1e
6021 EA Budel
The Netherlands
Tel : 0031-(0) 495 518214
Fax : 0031-(0) 495 518515
http:www.aata.nl
No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any
means, electronic, mechanical, photocopying, recording or otherwise without the written permission of AATA
International b.v.
The content of this manual is subject to change without notice. Product specification and design are subject to
change without notice.
Page 2 of 28
Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
Preface
AATA International is an innovative and dynamical company, specialised in stair climbing
equipment. Stairrobots are active in over 30 countries worldwide.
This manual is written for machine operators and for technician who take care for the
maintenance of the machine. Although the tiniest details are not set out, the manual is a
useful help for people who are dealing with the machine on a daily basis.
The stairrobot SR 1750 HE has been used for over 20 years by many well known companies
and transport contractors worldwide who are involved in the movement of heavy loads into
and out of customers premises.
The stairrobot SR 1750 HE is designed to carry unit loads weighing up to 1000 kg up- and
down stairs. The accessory equipment, stair approach ramp, manoeuvring dolly and the
turntable, have been designed to assist the movement up to and onto the stairs and the take
off from the top and journey to the final destination.
This manual should be used in conjunction with the cd-rom instruction video, which is
placed on the inside of the manuals cover.
Read this manual and view the instruction cd-rom carefully before putting the SR 1750HE
into operation. Always take note of the safety rules as mentioned in chapter “safety”.
A copy of this manual should be kept with the machine, so the operator has it at his disposal.
AATA International b.v.
Page 3 of 28
Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
Table of contents
Preface…………………………………………………………………………………………… 3
Table of contents .……………………………………………………………………………… 4
Survey of standards……………………………………...……………………………………… 5
Survey of standards………………………………………………………………………...…… 5
1. Technical data…..………………..………………………………………………………… 6
2. Description main components stair robot SR 1750 HE
2.1 Drive………………………………………………………………………………… 7
2.2 Transmission and brake………………………………………………………….. 7
2.3 Tracks………………………………………………………………………………. 7
2.4 Controls…………………………………………………………………………….. 8
2.5 Hydraulic levelling platform………………………………………………………. 8
2.6 Descent adjuster ………………………………………………………………….. 9
2.7 Hydraulic motor and Pump
3. Ancillary equipment
3.1 Loading ramp……………………………………………………………………………10
3.2 Turntable…………………………………………………………………………………11
3.3 Winch …………………………………………………………………………………..11
3.4 Dolly .…………………………………………………………………………………….11
4. Safety
4.1 General safety precaution……………………………………………………………...12
5. Operators procedure
5.1 Pre-use inspection…………………………………………………………………….. 14
5.2 Loading…………………………………………………………………………………. 15
5.2.1 The correct position of the load…………………………………………….15
5.2.2 Loading procedure ……………………………………………………… …16
5.3 Ascending………………………………………………………………………………..17
5.4 Descending ……………………………………………………………………………18
5.5 Unloading ………………………………………………………………………………19
6. Trouble shooting chart………………………………………………………………………20
7. Track replacement …………………………………………………………………………22
8. Electrical system chart………………………………………………………………………24
9. Hydraulic system chart …………………………………………………………………… 25
10. Parts………………………………………………………………………………………… 26
10.1 Parts list……………………………………………………………………………… 27
11. CD-rom video……………………………………………………………………………… 28
Page 4 of 28
Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
Survey of standard
We declare that the construction of the stairrobot SR1750HE is according to the provisions of
EC-Directives 89/392/EWG.
Applied harmonized standard:
NEN-EN 60034-5; NEN 10034-6; NEN 10072-2
Applied national standards, directives and technical specifications:
IEC 34-5; IEC 34-7; IEC 72-1
Survey of symbols
Not (or not completely) observing the operating instructions can lead to serious
accidents or damage
Danger as a result of electric tension
Page 5 of 28
Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
1. Technical data SR 1750 HE
Description Value Units
Speed 3 Metres p/minute
Lifting capacity max. 1000 Kg.
Maximum angle Max. 45 º Degrees
Weight 175 Kg.
Weight including standard accessories 232 Kg.
Colour ~~ ~~
Length 1185 Mm
Width 720 Mm
Height 320 Mm
Length loading ramp 1180 Mm
Width loading ramp 720 Mm
Drive-motor: single phase low noise AC
Thermal cut-out
Drive-motor capacity 0,75 KW
1 Hp
Drive-motor power 220 or 110 V
Hydraulic-motor: single phase low noise AC
with thermal cut out
Hydraulic-motor capacity 0,375 KW
0,5 Hp
Hydraulic-motor power 220 or 110 V
Hydraulic-pump: built directly on the hydraulic
Motor
Hydraulic-pump capacity 0,8 ltr/per minute
Action pressure max. 100 Bar
Capacity oil tank 0,5 Ltr
Control: remote control manually operated
4-button switch 24 V
Mains 220/110 V
50 Hz
Extension cord (cupper wire) 3x2,5 Mm2
Extension cord length 25 Mtr
Page 6 of 28
Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
2 Description main components stairrobot SR 1750 HE
2.1. Drive
•Single phase low-noise AC motor
with thermal cut-out
2.2. Transmission and brake
•Worm-gearbox built directly onto the
driving motor
•The worm-wheel reduction forms an affective
brake for the (loaded) StairRobot on the staircase
2. 3. Tracks
•Internally and externally toothed caterpillar tracks,
specially designed for smooth stair climbing
Page 7 of 28
Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
2. 4. Controls
•Remote control (2 metres cable attached) manually
operated 4-button switch
Press a button to drive
2. 5. Hydraulic-levelling platform
•To increase stability the platform can be adjusted to the angle of the staircase by a
hydraulic cylinder
Page 8 of 28
Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
2. 6. Descent adjuster
•The descent adjuster is located at the rear end of
the machine and is used to adjust the descent of
the lifting platform depending on the weight of the
load.
•Turn maximum clockwise for speed : 0
2.7. Hydraulic motor and pump
•The hydraulic-motor is placed on the drive
motor with the pump built directly onto the
motor
3. Ancillary equipment
3.1. Loading ramp
•The loading ramp is designed to fit neatly
into the stairrobots lifting platform. It
provides a safe ridged platform to transport
the load from the floor-surface to the load-
position on the robot.
Page 9 of 28
Manual Stair Robot SR1750 HE
Publication: 29-07-04
AATA INTERNATIONAL B.V.
3.2. Turntable
•The turntable is a circular piece of
equipment Ø 610 mm, h. 40 mm.
constructed out-of two disks of
block board with hard-plastic
surface to eliminate friction. It is
used to alter the direction of travel
for the (loaded) StairRobot. There
are finger grips on either side for
easy lifting or carrying.
3.3. Winch
•The winch is designed to fit into the lifting platform of the stairrobot. With the winch a
load can be pulled onto the platform with a minimum amount of effort
Page 10 of 28
Table of contents
