AAXA Technologies Showtime 3D User manual

aaxa
TECHNOLOGIES
User Guide
LED Showtime 3D

Caution!
WARNING: Please use this product as instructed. Misuse may cause
injury or death.
DO NOT use while driving
DO NOT expose to water or wet
surfaces. Electric shock may occur.
DO NOT expose the projected LED
image to your eyes or the eyes of
others
DO NOT block or restrict airow
from ventilation holes as this may
cause the projector to overheat
Keep the projector, or charger away
from any heat sources
Caution for Headphones Use
• Prolonged use at high volume may
impair your hearing.
• High volume during walking or driving
may cause distractions and result in
injury or death

Table of Contents
Chapter 1: Showtime at a Glance
Main Unit Front/Back
Remote & Keypad
Accessories
Chapter 2: Getting Started
Powering On / OFF
Focus Adjustment / Throw
Distance
Connecting to a Computer VGA
Connecting to a Computer HDMI
Connecting to Composite Video
Connecting to HDMI Video
Connecting to HDMI 3D Video
Connecting to External Sound
Connecting to a USB Host
1
2
3
4
5
6
7
9
10
12
13
14
15
17
18
20
21
23
24
26
28
29
32
37
39
40
Chapter 3: Menu Screens
Onboard Player Main Menu
Video Player Menu
Video FAQ
Photo Viewer Menu
Photo FAQ
Music Player Menu
Music FAQ
Ebook Viewer Menu
Setup Menu Screens
Keystone Adjustments
Chapter 4: 3D Setup Guide
Required Hardware
Installing Graphics Card
Technical Details
1

Showtime at a Glance
2
Chapter 1
Headphone Out
USB Port
Main Unit Front/Back
VGA Port
AV Input
Power Button
HDMI
Focus Adjustment
AC Power Input

Remote & Keypad
3
Power On/Off
Mute
Directional Pad
Exit/Back
Power Button
Both the keypad and remote can be used to navigate through the menus. The Main Menu
Navigation on the remote functions exactly the same as the directional pad on the LED Show-
time 3D unit.
Volume Control
Source
Playback Menu
Navigation Settings
Setting
Exit / Back

Accessories
4
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Remote Power Adapter A/V Cable

Getting Started
1. Connect the power cord to the LED Showtime 3D.
2. Connect the wall plug into the wall power source.
3. Press the button on the top of the projector or remote control to start the projec-
tor. The button’s LED light will light blue when the projector is on.
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press the button on the keypad or remote to put the projector in “Stand by mode”.
The optical engine should power off and the fan should stop spinning. The projector
can be turned on using the remote control. “Stand by mode” consumes a little bit of
power
2. To fully turn off the projector, press the button on top of the projector until the
power light turns red. Disconnect the power adapter from the power socket to fully
turn off the projector.
Power Socket

Focus Adjustment / Throw Distance
Focus Adjustment
• Move the focus knob left or right until
the image becomes clear.
6
DIAGONAL SCREEN SIZE
16:9 Aspect Ratio
Throw Distance Chart
Distance inch (“)
20
30
40
50
60
70
80
90
Diagonal Inch (“)
19
28
38
47
56
66
75
85
Throw Ratio 1.22
*minimum throw distance: 21 inches

Connecting to a Computer via VGA
Connect the end of the
7
VGA Cord
to your computer’s
VGA Adapter
Connect the end of the
VGA Cord
to your LED
Showtime 3D’s
VGA Adapter
Step 1:
Step 2:
Step 3:
In the Main Menu
Select “VGA” iconSelect “INPUT” icon

Connecting to a Computer Cont.
Step 4:
Enabling VGA or HDMI output on your Computer – To enable VGA or HDMI output on your
computer most computers require “turning on” the video output feature. Each computer is different.
Please consult your owner’s manual for instructions to enable VGA or HDMI output. Below are
standard instructions for a Windows 7 computer – not all systems are the same.
Press function & “F5” to instruct
the computer to enable multiple
displays.
You can also press Windows+P to
toggle through display settings.
*NOTE: different operating sys-
tems may differ
Step 5:
1. Right click on computer
desktop and select “Screen
Resolution”
2. Display Screen Resolution
window will pop up
3. The secondary monitor (2) is
the projector’s display.
4. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x800.
Step 6:
8

Connecting to a Computer via HDMI
Connect one end of the
9
HDMI Cord
to your computer’s
HDMI Adapter
HDMI Cord HDMI Adapter
Step 1:
Step 2:
Step 3:
Select “INPUT” icon
In the Main Menu
Connect one end of the
Select “HDMI” icon
to your LED
Showtime 3D’s

Connecting to Composite Video
Connect one end of the
Composite Cord A/V Adapter
Connect opposite end of to your devices
Step 1:
Step 2:
Composite Cord Composite Cord
10
to your LED
Showtime 3D’s

Connecting to Composite Video Cont.
Connectivity with multimedia devices
The LED Showtime 3D can connect to many media devices including: iPod,
iPhone, iPad, VHS players, DVD players, smart phones, cameras, video game
consoles and other peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed with the LED
Showtime 3D using the AAXA A/V iPod Cable. 11
Step 3:
Select “INPUT” icon
In the Main Menu
Turn on your multimedia device.
Step 4:
Select “AV” icon

Connecting to HDMI Video
Connect one end of the
HDMI HDMI Adapter
to your devices
Step 1:
Step 2:
HDMI Adapter
12
Connect one end of the
HDMI
to your LED
Showtime 3D’s

Connecting to HDMI Video Cont.
Connectivity with multimedia devices
The LED Showtime 3D can connect to many media devices including: iPod,
iPhone, iPad, VHS players, DVD players, smart phones, cameras, video game
consoles and other peripherals with ease.
13
Step 3:
In the Main Menu
Turn on your multimedia device. If avaiable select 1280x720 or 1920x1080
Step 4:
Select “INPUT” icon Select “HDMI” icon
*Additionally, with AAXA’s MHL HDMI Cable, Samsung Galaxy S3 and Galaxy
Note 2 smartphones can be connected via HDMI for perfect mirroring.

Connecting Speakers/Headphones
Connect your speakers/headphones
to the projector’s speaker adapter.
14
3.5 mm cord Speaker Adapter
Step 1:
Step 2:
*CAUTION for headphone use
• Prolonged use at high volume may impair
hearing
Ensure the power and volume on your
speaker or headphones is turned on
Step 3: Place the headphones on and enjoy!

Speaker Adapter
USB Host
How to insert your USB Drive
• Slide your USB Drive into USB port
of the LED Showtime. (as shown in
picture)
• Gently slide the drive until it cannot go
in any further
*Review the Specication
section of this manual to read
about the supported le
formats.
How to access your USB Drive
• Once your USB Drive has been in-
serted, you can navigate to any media
content in the main menu.
• After selecting the media content,
choose the USB selection.
• You can now access the data on your
USB drive through the onboard media
player
15

USB Host Cont.
16
Media Player menu
• In the Media Player selection you can
choose from Videos, Audio, Pictures,
and Ebooks.
• Select the appropriate menu for the type
of le you wish to view.
File Menu System
• The LED Showtime 3D will show all
folders and les you have on your USB
Drive.
• Use the directional buttons to navigate
to different folders or les.

Onboard Player Main Menu
17
Main Menu
Chapter 3
The LED Showtime 3D features a built in PMP (Portable Media Player) function.
This function allows the projector to play videos, pictures, music les, and text. To access
the main menu simply turn on the projector.
• Scroll Left/Right by pressing the left and right directional buttons
• To select a submenu, highlight the desired submenu and press the button
located in the middle of the keypad or remote.
• To go back to the previous page while in a submenu, press the back on the bottom
left of the onboard buttons on the device.

Video Player Menu
18
Opening a le:
• Select the video option
from the main menu.
• Select the hardware
media the le is stored
on
• Choose which le you
wish to play.
Previewing Files:
• Press the directional keys to highlight the item of interest
• Wait 2-3 seconds until a preview and info screen of the video shows on the
lower right of the screen
The LED Showtime 3D will show all folders and les you have on your USB.
Use the directional buttons to navigate to different folders or les.
Select the “video” icon