AAXA Technologies LED PICO User manual

aaxa
TECHNOLOGIES
User Guide

Caution!
WARNING: Please use this product as instructed. Misuse may cause
injury or death.
DO NOT use while driving
DO NOT expose to water or wet
surfaces. Electric shock may occur.
DO NOT expose the projected LED
image to your eyes or the eyes of
others
DO NOT block or restrict airow
from ventilation holes as this may
cause the projector to overheat
Keep the projector, battery, or
charger away from any heat sources
Caution for Battery Use
• Do not pierce or puncture the battery
with sharp objects
• Do not heat the product or expose it to
high temperature.
• Do not wet it or place it in any liquid
Caution for Headphone Use
• Prolonged use at high volume may
impair your hearing.
• High volume during walking or driving
may cause distractions and result in
injury or death

Table of Contents
Chapter 1: LED Pico at a glance
Main Unit Front/Back
Keypad
Accessories
Chapter 2: Getting Started
Powering On / OFF
Focus Adjustment / Throw
Distance
Connecting to a Computer HDMI
Connecting to Composite Video
Connecting to HDMI Video
Connecting to Speaker or Head-
phones
Connecting a Micro SD Card
1
2
3
4
5
6
7
9
11
13
14
16
18
19
21
22
24
25
27
28
29
34
35
36
Connecting to a USB Host
Chapter 3: Menu Screens
Main menu
Video Player Menu
Video FAQ
Photo Viewer Menu
Photo FAQ
Music Player Menu
Music FAQ
Ebook Viewer Menu
Setup Menu
Chapter 4: Technical Details
Troubleshooting
Specications
1

LED Pico at a Glance
2
Chapter 1
USB Port
Main Unit Front/Back
Power Button
HDMI
Focus Adjustment
Menu Navigation
Audio Out
Charge Port
AV Input

Keypad
3
On / Off
Back / Exit
Directional Keys

Accessories
4
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Tripod
A/V Cable
Micro USB Cable

Getting Started
1. If you want to charge your LED Pico, simply plug in the Micro USB cable to any
computer or wall adapter.
2. Once your LED Pico is charged, hold down the power button for approximately three
seconds until the unit starts projecting.
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press and the power button once, then again to conrm.
2. After a few seconds, the unit should turn off fully.
Note: The LED Pico Projector battery does not charge when it is in operation.

Focus Adjusment / Throw Distance
Focus Adjustment
• Spin the focus wheel up or down until the image becomes
clear.
6
DIAGONAL SCREEN SIZE
16:9 Aspect Ratio
Throw Distance Chart
Distance inch (“)
26
38
51
63
75
Diagonal Inch (“)
17
25
34
42
50
Throw Ratio 1.5
*minimum throw distance: 10 inches

Connecting to a Computer via HDMI
Connect one end of the
7
HDMI Cord
to your computer’s
HDMI Adapter
HDMI Cord
to your LED Picos
HDMI Adapter
Step 1:
Step 2:
Step 3:
Select “INPUT” icon
In the Main Menu
Connect one end of the
Select “HDMI” icon

Connecting to a Computer Cont.
Step 4:
Enabling HDMI output on your Computer – To enable HDMI output on your computer most comput-
ers require “turning on” the video output feature. Each computer is different. Please consult your
owner’s manual for instructions to enable HDMI output. Below are standard instructions for a
Windows XP computer – not all systems are the same.
Press function & “F5” to instruct
the computer to enable multiple
displays.
You can also press Windows+P to
toggle through display settings.
*NOTE: different operating sys-
tems may differ
Step 5:
1. Right click on computer desk-
top and select “Properties”
2. Display Properties window
will pop up
3. Click on the “Settings” Tab
4. If a secondary monitor is
grayed out, click on it and
check “Extend my Windows
Desktop onto this monitor”
5. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 1280x800.
Step 6:
8

Connecting to Composite Video
Connect one end of the
Composite Cord
to your LED Pico’s
A/V Adapter
Connect opposite end of to your devices
Step 1:
Step 2:
Composite Cord Composite Cord
9

Connecting to Composite Video Cont.
Connectivity with multimedia devices
The LED Pico can connect to many media devices including: iPod, iPhone, iPad,
VHS players, DVD players, smart phones, cameras, video game consoles and
other peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed with the LED
Pico. 10
Step 3:
Select “INPUT” icon
In the Main Menu
Turn on your multimedia device.
Step 4:
Select “AV” icon

Step 3:
Turn on your multimedia device.
Step 4:
Connecting to HDMI Video
Connect one end of the
Mini HDMI Cable
to your LED Pico’s
Mini HDMI Adapter
to your devices
Step 1:
Step 2:
HDMI Adapter
11
Connect one end of the
HDMI
14

Connecting to HDMI Video Cont.
Connectivity with multimedia devices
The LED Pico can connect to many media devices including: iPod, iPhone, iPad,
VHS players, DVD players, smart phones, cameras, video game consoles and
other peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed with the LED
Pico. 12
Step 3:
In the Main Menu
Turn on your multimedia device. If available select 960x540 or 1280x800
Step 4:
Select “INPUT” icon Select “HDMI” icon

Step 3:
Turn on your multimedia device. If available select 960x540 or 1280x800
Step 4:
Connecting Speakers/Headphones
Connect your speakers/headphones
to the projector’s speaker adapter.
13
3.5 mm cord Speaker Adapter
Step 1:
Step 2:
*CAUTION for Headphone Use
• Prolonged use at high volume may impair
hearing
Ensure the power and volume on your
speaker or headphones is turned on
Step 3: Place the headphones on and enjoy!

Micro SD Card
14
How to insert your Micro SD Card
• Slide in your SD card into the SD card
slot on the front of the LED Pico. (as
shown in picture)
• Gently slide the SD card until it clicks
into place.
*Review the Specication
section of this manual to read
about the supported le
formats.
How to access your Micro SD Card
• Once your SD Card has been inserted,
you can navigate to any media content
in the main menu..
• After selecting the media content,
choose the SD card selection.
• You can now access the data on your
SD card through the onboard media
player

Micro SD Card Cont.
15
Media Player menu
• In the Media Player selection you can
choose from Videos, Audio, Pictures,
and Ebooks.
• Select the appropriate menu for the type
of le you wish to view.
Return: Brings you
back to the main
menu
File Menu System
• The LED Pico will show all folders and
les you have on your SD Card in the
C: drive.
• Use the directional buttons to navigate
to different folders or les.

USB Host
How to insert your USB Drive
• Slide your USB Drive into USB
adapter. (as shown in picture)
• Gently slide the drive until it cannot go
in any further
*Review the Specication
section of this manual to read
about the supported le
formats.
How to access your USB Drive
• Once your USB Drive has been in-
serted, you can navigate to any media
content in the main menu..
• After selecting the media content,
choose the USB selection.
• You can now access the data on your
USB drive through the onboard media
player
16

USB Host Cont.
17
Media Player menu
• In the Media Player selection you can
choose from Videos, Audio, Pictures,
and Ebooks.
• Select the appropriate menu for the type
of le you wish to view.
Return: Brings you
back to the main
menu
File Menu System
• The LED Pico will show all folders and
les you have on your USB Drive.
• Use the directional buttons to navigate
to different folders or les.

Menu Screens
18
Main Menu
Chapter 3
The LED Pico features a built in PMP (Portable Media Player) function.
This function allows the projector to play videos, pictures, music les, and text. To access
the main menu simply turn on the projector.
• Scroll Left/Right by pressing the left and right directional buttons
• To select a submenu, highlight the desired submenu and press the OK button
located in the middle of the keypad.
• To go back to the previous page while in a submenu, press the back on the far
right just underneath the directional keypad.