AAXA Technologies P2jr Pico User manual

aaxa
TECHNOLOGIES
User Guide
P2jr Pico Projector

Caution!
WARNING: Please use this product as instructed. Misuse may cause
injury or death.
DO NOT use while driving
DO NOT expose to water or wet
surfaces. Electric shock may occur
DO NOT expose the LED to your
eyes or the eyes of others
'2127EORFNRUUHVWULFWDLUÀRZ
from ventilation holes as this may
cause the projector to overheat
Keep the projector, battery, or
charger away from any heat sources
Caution for Battery Use
 Do not pierce or puncture the battery
with sharp objects
 Do not heat the product or expose it to
high temperature.
 Do not wet it or place it in any liquid

Table of Contents
Chapter 1: P2jr at a glance
Main Unit
Keypad
Accessories
Chapter 2: Getting Started
Powering On / OFF
Focus Adjustment / Throw
Distance
External Inputs /Output Sources
Connecting to a Computer
Connecting to Composite Video
Connecting to HDMI Video
Connecting a MicroSD Card
2
2
3
4
5
5
6
7
8
12
14
16
18
20
20
21
22
24
26
28
29
32
32
34
Connecting to a USB drive
Chapter 3: Menu Screens
Main menu
File Menu System
Video Player Menu
Photo Viewer Menu
Music Player Menu
Text Viewer Menu
Setup Menu
Chapter 4: Technical Details
Troubleshooting
6SHFL¿FDWLRQV
1

P2jr at a Glance
Power Button
Mini A/V / VGA Input
Power Input
Projection Lens
Cooling Fan
Directional Pad
USB Port
Mini HDMI
Chapter 1
Main Unit
Charge Indicator
MicroSD Card Slot
Back Button
Focus Adjustment
Speaker
&RQ¿UP6HOHFWLRQ
2

Keypad
3
Power ON / OFF
Exit/Back
&RQ¿UP6HOHFWLRQ
Directional Keypad
This key allows you to return to
the previous menu or exit from
the media player option.
Use these keys in highlight the
selection you which to choose. Use this key to select the
current highlighted option.
*More detailed direction of the keypad will be discussed in individual subsections.
Holding down the power
button for 3 seconds will
either turn the P2Jr
ON or OFF.

Accessories
4
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Power Adapter VGA Cable
Composite A/V Cable
Sold Separately
Mini-Full HDMI
Standard Accessories

Getting Started
1. Connect the power cord to the P2jr.
2. Connect the wall plug into the wall power source.
3. Press the POWER button and hold for 2-3 seconds to switch on or switch
off the power
 The LED turns red while charging.
 7KH/('WXUQVJUHHQZKHQFKDUJLQJLV¿QLVKHG
 4 hours of charge time is required to reach a full charge.
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press and hold the power button for 3 seconds.
2. The optical engine should power off and the fan should stop spinning.
Note: The P2jr Projector battery does not charge when it is in operation.

Focus Adjusment / Throw Distance
Focus Adjustment
1. Spin the focus wheel up or down until the image becomes
clear.
2. The recommended focus distance for this projector is 12” to
LQ¿QLW\
6
DIAGONAL SCREEN SIZE
4:3 Aspect Ratio
Throw Distance Chart
Distance inch (“) Diagonal Inch (“)
Throw Ratio 1.25:1
*minimum throw distance: 10 inches
8
12
16
24
31
39
47
55
10
15
20
30
40
50
60
70

External Inputs/Outputs
7
Laptop Desktop USB Stick
Micro SD Card
HDMI Cable
Composite Cable

Connecting to a Computer via VGA
Connect the large end of the
8
VGA Cord
to your computer’s
VGAAdapter
Connect the small end of the
VGA Cord
to your P2jr’s
VGAAdapter
Step 1:
Step 2:
Step 3: In the Main Menu
Select “VGA” icon