AAXA Technologies P300 Neo User manual

aaxa
TECHNOLOGIES
User Guide

Caution!
WARNING: Please use this product as instructed. Misuse may cause
injury or death.
DO NOT use while driving
DO NOT expose to water or wet
surfaces. Electric shock may occur
DO NOT expose the projected LED
image to your eyes or the eyes of
others
DO NOT block or restrict airow
from ventilation holes as this may
cause the projector to overheat
Keep the projector, battery, or
charger away from any heat sources
Caution for Battery Use
• Do not pierce or puncture the battery
with sharp objects
• Do not heat the product or expose it to
high temperature.
• Do not wet it or place it in any liquid
Caution for Headphone Use
• Prolonged use at high volume may impair your
hearing.
• High volume during walking or driving may
cause distractions and result in injury or death

Table of Contents
Chapter 1: P300 Neo at a Glance
P300 Neo Introduction
Remote & Touchpad
Accessories
Chapter 2: Getting Started
Powering On / Off
Focus Adjustment / Throw
Distance
External Inputs/Outputs
Connecting to a Computer VGA
Connecting to a Digital Input
Connecting to Composite Video
Connecting to Digital Input Video
Connecting to Speakers or
Headphones
Connecting a TF Card
Connecting a USB Stick
Chapter 3: Menu Screens
Main Menu
Video Player Menu
Photo Viewer Menu
Music Player Menu
Text Viewer Menu
Chapter 4: Setup Menu
Settings
Keystone Feature
Chapter 5: Technical Details
Troubleshooting
Specications
Notes
1
2
3
4
5
6
7
9
11
13
15
16
18
21
22
26
30
33
34
39
41
43
44

P300 Neo at a Glance
1
Chapter 1
Power Switch
TF Card Slot
Digital Input Port
USB Port
Main Unit Front/Back
Mini-VGA Port
Touchpad
Focus Adjustment
AV Port
Headphone Out
Power On/Off
Main Menu Navigation
DC Port
Note: Boost Mode can only be used for 1 hour.

Remote & Touchpad
2
Power On/Off Source Menu
Menu Exit/Back
Both the touchpad and remote can be used to navigate through the menus. The Main Menu
Navigation on the remote functions exactly the same as the directional pad on the P300 Neo
unit.
OK
Main Menu Navigation
Media Player
Menu Navigation
Volume Up
Volume Down
Remote
Home
Back
>
>
>
>
|||||
NOTE: Pressing power on the remote will only put the projector in STANDBY mode.
Toggle the “ON/OFF” switch on the side of the projector to fully turn the projector off.

Accessories
3
Note: VGA Adapter Cable sold separately
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Additional accessories are available for purchase at www.aaxatech.com
Remote
Power Adapter
A/V Cable
Tripod
VGA Cable
(sold separately)

Getting Started
1. Connect the power cord to the P300 Neo.
2. Connect the other end of the power cord into the wall power source.
3. Toggle the On / Off switch on the side of the projector to the “ON” position -- the
projector should automatically turn on.
4
Powering ON the projector
Chapter 2
Powering OFF the projector
1. To turn off the projector, toggle the “Power Switch” to the “OFF” position. This will
fully turn off the projector.

Focus Adjusment / Throw Distance
5
DIAGONAL SCREEN SIZE
16:9 Aspect Ratio
Throw Distance
Units: Inches
19
29
38
48
57
67
76
86
Diagonal Size
Units: Inches
20
30
40
50
60
70
80
90
• Spin the focus wheel up or down until the image becomes
clear.
Focus Adjustment
Throw Distance Chart
Throw Ratio 1.2
Projection Angle: 100% Offset
*minimum throw distance: 10 inches

6
External Inputs and Outputs
Headphones/speakers
Composite Cable
Digital Input
Mini-VGA
USB Stick
TF Card

Connecting to a Computer via VGA
7
Connect one end of the VGA Cable
to your computer’s VGA Adapter.
Step 1:
Step 2:
Step 3:
In the Main Menu, select the “Inputs” icon and then the “VGA” Icon.
Connect the other end of the VGA
Cable to your P300 Neo’s VGA port.
Select “VGA” iconSelect “INPUT” icon
Note: VGA Adapter Cable sold separately