AAXA Technologies P4 User manual

aaxa
TECHNOLOGIES
User Guide
P4 Pico Projector

Caution!
WARNING: Please use this product as instructed. Misuse may cause
injury or death.
DO NOT use while driving
DO NOT expose to water or wet
surfaces. Electric shock may occur
DO NOT expose the LED to your
eyes or the eyes of others
DO NOT block or restrict airow
from ventilation holes as this may
cause the projector to overheat
Keep the projector, battery, or
charger away from any heat sources
Caution for Battery Use
• Do not pierce or puncture the battery
with sharp objects
• Do not heat the product or expose it to
high temperature.
• Do not wet it or place it in any liquid
Caution for Earphone (Earplug) Use
• Prolonged use at high volume may
impair your hearing.
• High volume during walking or driving
may cause distractions and result in
injury or death

Notice: Accessing the desktop allows the user to manipulate the le system including installation of applica-
tions and manipulation of the OS control panel. Improper use can result in corruption and/or damage to the
Operating System. AAXA Technologies does NOT provide technical support for Operating System issues.
ACCESS AT YOUR OWN RISK! Use of desktop requires a mouse and keyboard. Please visit our webpage
for more information
The AAXA P4 runs the Windows CE operating system. All Standard Functions can be found on the Home
Screen and can be manipulated with the keypad on the projector. Because we dislike locked devices,
rather than locking the Windows CE Desktop we have decided to leave this function unlocked. This allows
users to enjoy the full capabilities of the Windows CE operating system. However if you choose to access
the desktop, please make sure you know what you are doing. It is very easy to damage or corrupt the pro-
jector or the operating system through the Windows Desktop. AAXA does not support 3rd party applications
and any adjustments to the desktop. You are on your own here – please access the Windows Desktop at
your own risk.
Windows CE Desktop

Table of Contents
Chapter 1: P4 at a glance
Main Unit Front/Back
Remote & Keypad
Accessories
Chapter 2: Getting Started
Powering On / FF
Focus Adjustment / Throw
Distance
External Inputs /Input Sources
Connecting to a Computer
Connecting to Composite Video
Connecting to Speaker or
Headphones
Connecting to Mouse/Keyboard
2
2
3
4
5
5
6
7
8
10
12
13
15
17
18
19
20
20
21
23
25
27
28
29
29
31
Computer Data Transfer
Saving to USB/SD card
Connecting a Micro SD Card
Connecting to a USB drive
Chapter 3: Menu Screens
Main menu
Video Player Menu
Photo Viewer Menu
Music Player Menu
Windows CE Desktop
Setup Menu
Chapter 4: Technical Details
Troubleshooting
Specications
1

P4 at a Glance
2
Power Button
VGA Input
Power Input
A/V Input
Projection Lens
Headphone
Conrm Selection
Directional Pad
USB Port
Mini USB Port
Chapter 1
Main Unit Front/Back/Side
Charge Indicator
Micro SD Card Port
Back Button
Focus Adjustment
Reset Hole

Remote & Keypad
3
NOTICE: Pressing power on the remote will only put the projector in STANDBY
mode. Please press the power button on the projector if you want to turn it off.
Power On/Off
Main Menu Navigation
Select Source
Media Player Menu
Navigation
Power Exit/BackDirection Pad
Both the keypad and remote can be used to navigate through the menus. The Main Menu
Navigation on the remote functions exactly the same as the directional pad on the P4 unit.

Accessories
4
*Under various circumstances, the actual accessories may be different from
those shown in the pictures above.
Tripod Remote
Power Adapter VGA Cable A/V Cable
Mini USB to
USB Adapter
Optional Keyboard/Mouse

Getting Started
1. Connect the power cord to the P4.
2. Connect the wall plug into the wall power source.
3. Press POWER button and hold for 2-3 seconds to switch on or switch off
the power
• The LED turns red while charging.
• The LED turns green when charging is nished.
• 4 hours of charge time is required to reach a full charge.
5
Powering ON the projector
Chapter 2
Powering OFF the projector
1. Press and hold the power button for 3 seconds.
2. The optical engine should power off and the fan should stop spinning.
• Note. Pressing the power button on the remote puts the projector in
standby mode. It will NOT turn off the projector.
Note: The P4 Projector battery does not charge when it is in operation.

Focus Adjusment / Throw Distance
Focus Adjustment
1. Spin the focus wheel left of right until the image becomes
clear.
2. The recommended focus distance for this projector is 12” to
innity.
6
DIAGONAL SCREEN SIZE
16:9 Aspect Ratio
Throw Distance Chart
Distance inch (“)
12
18
24
30
36
74
84
96
Diagonal Inch (“)
6.3
9.5
12.6
15.8
18.9
38.9
44.2
50.5
Throw Ratio 1.9
*minimum throw distance: 10 inches

External Inputs/Outputs
7
Laptop
Desktop
USB Stick
Headphone/speaker
Keyboard
Mouse
Micro SD Card
Composite Cable

Connecting to a Computer
Connect the large end of the
8
VGA Cord
to your computer’s
VGA Adapter
Connect the small end of the
VGA Cord
to your P4’s
VGA Adapter
Step 1:
Step 2:
Step 3:
Select “Source” Change resolution
Then
In the Main Menu

Connecting to a Computer Cont.
Step 4:
Enabling VGA output on your Computer – To enable VGA output on your computer most
computers require “turning on” the video output feature. Each computer is different.
Please consult your owner’s manual for instructions to enable VGA output. Below are
standard instructions for a Windows XP computer – not all systems are the same.
Press function & “F5” to instruct
the computer to enable multiple
displays.
You can also press Windows+P to
toggle through display settings.
*NOTE: different operating sys-
tems may differ
Step 5:
1. Right click on computer desk-
top and select “Properties”
2. Display Properties window
will pop up
3. Click on the “Settings” Tab
4. If a secondary monitor is
grayed out, click on it and
check “Extend my Windows
Desktop onto this monitor”
5. If the image is blurry or the
text is not legible, adjust
the screen resolution. We
recommend 800x600 or
1024x768.
Step 6:
9

Connecting to Composite Video
Connect one end of the
Composite Cord
to your P4’s
A/V Adapter
Connect opposite end of to your devices
Step 1:
Step 2:
Composite Cord Composite Cord
10

Connecting to Composite Video Cont.
Connectivity with multimedia devices
The P4 can connect to many media devices including: iPod, iPhone, iPad, VHS
players, DVD players, smart phones, cameras, video game consoles and other
peripherals with ease.
*Apps on smart phones require video out capabilities to be displayed with the P4. 11
Step 3:
Select “Source”
In the Main Menu
Choose Composite Video
Then
Turn on your multimedia device.
Step 4:

Step 3:
Turn on your multimedia device.
Step 4:
Connecting Speakers/Headphones
Connect your speaker
or headphones
12
3.5 mm cord
to your P4’s
Speaker Adapter
Step 1:
Step 2:
Caution for Earphone (Earplug) Use
• Prolonged use at high volume may impair
your hearing.
Ensure the power and volume on your
speaker or headphones is turned on
Step 3:
Place headphones/earphones in/over ears

Connecting Keyboard/Mouse
Connect your key-
board/mouse combo’s
USB Adapter
to your P4’s
USB Input
Step 1:
Mouse Touchpad
Left Click
Right Click
Remove the USB Adapter
from the back of your Key-
board /mouse combo
Step 2:
Step 3:
Move the ON/Off Switch on the side of the combo.
13
Step 4:
Press the “red” button to sync the wireless usb adapter to the keyboard.

Connecting Keyboard/Mouse
Optional Keyboard and Mouse can be purchased directly from AAXA Technologies at
www.aaxatech.com
A USB mouse can be used to select most options on the P4.
• To move the cursor, place 1 nger on the pad located on the right and move your nger
in the direction you wish to move the mouse.
• Hover over your selection and click the left mouse button.
• A keyboard can be used in the “desktop” feature.
Please refer to the “Desktop section of the manual for a more detailed explanation.
Wireless Signal
14

Computer Data Transfer Only
Connect small end of the
15
USB Adapter
to your P4’s
Micro USB Input
to your computer’s
Step 1:
Step 2:
Connecting your P4 to your computer for data
transfer allows you to add les to store onto the
onboard memory. This will allow you to play les
with your P4 as a standalone device.
USB Adapter USB Port
Connect opposite end of

USB Port
Computer Data Transfer Only
16
Step 3:
Turn On the P4 and open the “Open to view les”
that autoplays.
NAND hardrive
OR
Step 4:
Place les in appropriate folders
Video les go here
Music les go here
Image les go here
Note. If your computer fails to detect the projector, check to make sure the cable is se-
curely inserted on both sides. If you’re still unable to view the folder, please consult with
your operating system’s owner manual.

How to Save Files to your Sd or USB
17
Video les go here
Music les go here
Image les go here
In order to correctly display your media les SD or USB, the les must be placed in the
correct folder.
Step 1:
Create folders “movie”, “music”, and
“picture” in all lowercase.
To do this, right click on your mouse
on an empty space in your SD or
USB’s main folder.
Step 2:
Place les in appropriate folders