ABC WORLDWIDE 30-L User manual

Assembly instructions for the table trolley 30-L
1.) For the assembly of the table trolley 30-L you need
the following materials:
-2x wheels with brakes
-2x wheels without brakes
- ast iron frame (basi frame)
-2x ross bra es
-2x side frames
-2x onne ting struts
-2x side support
-2x Fixing bars
-s rews
-s rewdriver or ordless s rewdriver
-wren h
2.) Mounting the wheels:
Pla e the ast iron frame upside down on the floor. Mount the wheels as shown in the pi tures.
Make sure that the two wheels with brakes are on one of the two narrow sides. These are ea h fixed
with 4x s rews.
3.) Assembly of the ross bra es:
Pla e the ast iron stand on the orre t side. Now the two ross bra es an be atta hed. These are
fastened to the base frame with 2x s rews ea h. The s rews are inserted from top to bottom.

4.) Assembly of the side frames:
The side frames are simply inserted into the holes provided. Make sure that the side frame with the
oil/bra ket is without brake on the side with the wheels.
5.) Assembly of the onne ting struts:
The onne ting struts are mounted on the side of the brakes. The three s rews are mounted from
outside to inside. At the bottom, the onne ting struts are s rewed on top of ea h other as shown in
the pi ture.
6.) Mounting the side bra ket:
First the fixing bar is pushed onto the side holder, whi h is shown in the pi ture. Then the s rews
are mounted from outside to inside. Please repeat this pro edure for the other side.