ABI INTERIORS Aliro 15311 User manual

ALIRO ACCESS IBLE BACKRE S T
Dis cla imer: Pro du cts in th is man u a l mu s t b y la w b e in s ta lled b y licen s ed a n d reg is tered trad esp eo p le in acco rd a n ce w ith th e relevan t s ta n d a rd s . A BI a n d th e ma n u f a c tu rer/d is trib u to r
res erve t h e rig h t to v a ry s p ecifica tio n s o r d elete mo d els fro m t h eir ra n g e with o u t p rior n o tif ic a tio n . Dimen s io n s a re n o min a l mea s u remen t s on ly. Th e in f o rma tio n lis t ed is co rrec t a t th e time
o f p u b lica tio n , h o w ev er A B I a n d th e ma n u fa ctu rer/d is t ribu t o r takes n o res p o n s ib ilit y fo r p rin tin g errors . Co p yrig h t © A B I I n terio rs 2 02 2 P ty Ltd
SPECIFICATIONS
RECOMMENDED USE Domestic/Commercial
MATERIAL 316 Stainless Steel, EVA
MOUNT HARDWARE INCLUDED Yes, 14G x 75mm Timber Screws
STANDARDS AS14 28 .1:2021

INS TA LLATION G UIDE
DO NOT use c ream
cleaners or bleac h .
Thesesubstances are
abra sive
DO NOT usecleaning
pads with abrasiv e
sur f aces as this may
scratch the material
Regularly clean with
mildliquid detergen t
or soap and water
Note: This product must be installed by a licensed tradesperson.
This product’s install must comply with AS1428.1 for installation within
Australia. This is a general installation guide - there are many factors
that are involved that can alter the installation method. ABI takes no
responsibility if your product is not fixed to adequate wall structure.
1Install toilet pan (please refer to purchased toilet pan
install guide for more instructions). For back to wall
option, DO NOT install cistern prior to backrest.
2Mark out fixing location as shown below. Ensure adequate
wall structure is located at fixing points.
Structure
Structure
217.5 217.5
85
4Fix brackets to adequate structure. Ensure orientation of
brackets is as illustrated below.
Drill
Screw
Washer
Fixing Bracket
Pilot Hole
31. Using the large allen key provided, assemble the backrest
ensuring all fixings are tight.
2. Align backrest with the fixing locations and double check
marked location and drill a pilot hole.
1.
2.
5Install cistern according to relevant install guide. 6Fix backrest to bracket using the allen’s key provided to tighten
grub screws.

IN THE BOX
1. Fixing bracket
2. Washer
3. 14g x 75mm Timber screw - type 17
4. Right hand side bracket
5. Connection rail
6. Fixing plate
7. Pillow
8. Left hand side bracket
9. ST4.8 x 55mm Bolt
10. M8 x 8mm Grub screw
11. 4mm Metric allen key
12. M5 x 6mm Grub screw
13. 2.5mm Metric allen key
1
2
310
11
9
12
13
4
67
8
5