abi ASHER 14408 User manual

AS HE R BACK TO WAL L TO IL E T S UITE
Dis cla imer: P ro d u c ts in th is ma n u a l mu s t by la w b e in s talled b y licen s ed an d reg is tered tra d es p eo p le in a cco rd a n ce w ith th e releva n t stan d a rds . A B I a n d th e ma n u fa ctu rer/d is trib u to r
res erve t h e rig h t to va ry s p ecif ic a tio n s o r d elete mo d els fro m t h eir ra n g e w ith o u t prio r n o tif ic a t io n . Dimen s io n s a re n o min a l mea s u remen ts o n ly. Th e in f o rmatio n lis ted is co rrect at th e time
o f p u b lica tio n , h o w ever A B I a n d th e man u f a c tu rer/d is trib u to r ta kes n o res p o n s ib ility fo r p rin tin g erro rs. C o p yrig h t © A B I I n terio rs 2 02 2 Pty Ltd
SPECIFICATIONS
RECOMMENDED USE Domestic
MATERIAL Pan: Glazed Porcelain
Seat: Soft Close - Hardened Polypropylene (PP
TEMPERATURE RATING Maximum continuous working temperature 75°C
If the water temperature exceeds 75°C,an approved tempering
valve must be fitted
PRESSURE RATING Recommended minimum working pressure 150kPa
Recommended maximum working pressure 500kPa
Hot and cold water inlet pressure should be equal
INSTALLATION Floor Mounted
STANDARDS WELS 4 Star, Half Flush 3 Litres, Full Flush 4 .7 Litres
Average Flush 3.4 Litres, L07269
AS 1172. 1: 2014
WMK259 88

1. Apply silicone to the bolts and washers.
2. Attach the bolts, rubber seal and flexi hose
Remove cap and push flexi hose through the side
of pan.
Remove cap
Allign S trap adaptor and fix wall bracket
Note: Us e approriate fixings accor ding
to wall finish.
1 2
3 4
6
Align and bolt the cistern to the pan.
5
1. File edges of S trap adapter.
2. Using a spanner fasten threaded rod to the
wall plate and the S trap.
3. Place pan collar onto S trap adapter.
1. Measure *230 2mm from the wall to waste
pipe end *Please check this dimension yourself.
2. Use a saw to cut the pipe.
INSTALLATION GUIDE
Note: This product must be installed by a licensed t r adesperson.
This is a general installation guide - there are many factors that
are involve d that can alter the installation method.
Apply silicone
when attaching
1.
Outlet valve
Plug
Inlet valve
2.
Outlet valve
Inlet valve
2.
1.
Wa l l
230
105 - 180mm*
*WASTE PIPE SET-IN LIMITS
1.
2.
3.
Apply silicone
when attaching
INSTALLATION GUIDE
Note: This product must be installed by a licensed plumber. This is a
general installation guide - there are many factors that are involved
that can alter the installation method. The standards in your respective
country must be adhered to by your licensed tradesperson

Push toilet back, ensure waste pipe aligns.
7
1. Push expansion plugs into pan holes.
2. Use a screwdriver to attach hinges.
3. Adjust hinges and push seat on
10
Attach flush button to cistern lid.
9
1. Always test and commission before customer use.
2. Silicone pan.
11
Connect flexi hose to wall outlet.
Test and flush for leaks.
8
2.
1.
1.
2.
3.
Silicone pan

1
2
Parts list
1. Pan
2. Foam washer
3. Cistern
4. Outlet valve
5. Inlet valve
6. Cistern lid
7. Flush buttons
8. Pan Bolt set [x2]
9. Expansion plug [x2]
10. Hinges [x2]
11. Screws [x2]
12. Seat [x2]
4
3
5
8
7
6
11
10
9
12
DO NOT use cream
cleaners or bleach.
These substances are
abrasive.
Regularly clean with
mild liquid detergent
or soap and water.
DO NOT use cleaning
pads with abrasive
surfaces as this may
scratch the material.