Better Bathrooms BUN/BeBa 27555/78725 User manual

Top Fix Soft Close Toilet Seat
Please note: Image is for illustrative purposes only and may differ slightly to the
actual product
•Single-person assembly
•Tools required
•We always recommend using professional
tradespeople to install your product V1_21.5.20

2
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers
We're on a mission to bring you extraordinary bathroom products, for less. From modern
to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So,
you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless
awards; including the National Business Awards UK, the Digital Entrepreneur Awards and
being placed on The Sunday Times Fast Track 100.
We hope your new product exceeds your highest expectations. However, if you
experience any problems, please:
•call our friendly UK call centre on 0871 244 0935 (9am-7pm Monday to Friday, or
10am-4pm Saturday and Sunday), or
•send us a message via [email protected]
Important information
•Please read these instructions thoroughly and retain for future reference
•Manufactured to BS EN 1254 –Specification for WC seats (plastics)

3
Parts
Please note that Parts are for illustrative purposes only and may differ slightly to
the actual product
1. Expanding Plug
2. Gasket
3. Fitting Peg
4. Fixing Screw
5. Fitting Cover
4. Seat/Lid Assembly
Tools required
Screwdriver

4
Installation
1. Push the expanding plugs (part 1) into the holes on the toilet pan then place the
gaskets (part 2) between fitting pegs (part 3) and toilet pan. Next, place the long
screws (part 4) through the fitting pegs and gaskets and screw into the expanding
plug (part 1).
Please note: Fit the screws loosely and do not fully tighten at this stage
2. Turn the fittings on the toilet so that they align with the holes on the seat, then push
the seat onto the pegs until it clicks into place. Gently move the seat so that it
aligns on the toilet pan.
3. Once the seat is aligned, tighten the screws into the fittings (as below) then once
the seat is secured, remove it by pressing both buttons and lifting away.

5
4. Place the fitting covers over the fixed fittings then push the seat onto the fitting
pegs and click into position
Using
During use do not force the seat closed as this will damage the soft close mechanism.
Pull the seat and/or lid towards you slightly until it reaches the point at which it will fall
under its own weight, then release.
Do not stand on the toilet seat.
Cleaning
To maintain the surface of your product, wipe with a clean damp cloth and wipe dry, do
not use any abrasive cleaning agents or materials.
It is recommended to wipe the seat and fittings on a regular basis.

6
Troubleshooting
Seat becomes loose after a period of use
Remove the seat and re-tighten the fittings.
Soft close mechanism stops working
The mechanism cannot be replaced, replace the seat and lid, however, the fittings can
remain fitted. Removal of seat/lid is advised in Maintenance (below).
Seat is short or overhangs the toilet pan
Align the seat lid with the front edge of the toilet pan, the fittings are adjustable.
Maintenance
•To remove the seat/lid, press the two buttons at the rear of the seat and pull the
seat/lid away from the fitting pegs. When replacing ensure it clicks into place.
•To access the fixing screws, remove the lid/seat as above, then pull off the covers.