Abicor Binzel WK23 User manual

Coolant
Recirculator
WK 23 / WK 43
Welding & cutting brought to the point.
Type Line Voltage Frequency Power Rating Current Consumption Part no.
WK 23 115 V 50 Hz 0.35 kW 6.7 A 850.0214
115 V 60 Hz 0.35 kW 6.5 A 850.0135
230 V 50 Hz 0.35 kW 3.1 A 850.0137
230 V 60 Hz 0.35 kW 3.1 A 850.0210
240/415 V 50 Hz 0.50 kW 2.9 A/1.8 A 850.0144
WK 43 115 V 50 Hz 0.35 kW 6.7 A 850.0215
115 V 60 Hz 0.35 kW 6.5 A 850.0156
230 V 50 Hz 0.35 kW 3.1 A 850.0159
230 V 60 Hz 0.35 kW 3.1 A 850.0211
240/415 V 50 Hz 0.50 kW 2.9 A/1.8 A 850.0165
Operating instructions and technical data: see page 3.
DIN EN
ISO 9001
C
E
R
T
I
F
I
E
D
Q
M
-
S
Y
S
T
E
M

Subject to change without notice. Guarantee for Genuine Binzel Spares only.
10 Tank cpl. 850.0007
20 Cap WK 23 850.0016
Cap WK 43 850.0022
30 Radiator 2-row WK 23 850.0026
Radiator 4-row WK 43 850.0027
40 Front panel WK 23 850.0041
Front panel WK 43 850.0047
41 Side panel WK 23 850.0041
60 Fan-blade 850.0053
70 Fitting G 3/8” 850.0057
80 Lock-nut M12x1 500.0080
90 Tank cap 850.0059
100 Gasket 850.0060
110 Hose 3 black 8.5x2.5 per meter 109.0013
120 Motor and pump 115 V/50 Hz 850.0216
Motor and pump 115 V/60 Hz 850.0202
Motor and pump 230 V/50 Hz 850.0203
Motor and pump 230 V/60 Hz 850.0209
Motor and pump 240 V/415 V/60 Hz 850.0204
140 Washer ø 6.0 mm 20 pcs. 001.0148
150 Screw M6x20 20 pcs. 009.0161
160 Screw M5x6 20 pcs. 079.0039
161 Screw M5x12 20 pcs. 079.0037
180 Hose clamp ø 14.5 mm 20 pcs. 173.0010
Housing and
Immersion pump
Pos. Description Specifications Order-no.Build group

200 Fitting 90 deg. 850.0037
201 T-piece (to connect 2 torches) 850.0189
203 L-connector (to connect 2 torches) 850.0235
204 Water flow cutt-off switch 850.0033
1. As coolant for all liquid-cooled torch systems, we recommend the special BINZEL coolant BTC-15,
which remains liquid down to -15°C.
Features of BINZEL Coolant BTC-15:
• Non-conductive with regard to no-load voltages and operating voltages, in the sense of welding
technology.
• Important for all torches using HF, and/or using two potentials, such as plasma torches and for all
grounded, metallic coolant tanks.
• Prevents electrolytic corrosion when using torches made from different metals and torches with small
diameter cooling channels.
• Increases life of torch, cable assembly, pump and cooler.
• Non-toxic for humans and safe for the environment (see data sheet).
2. Must be used in conjunction with an adequate motor protection device.
3. A water flow cut-off switch (850.0033) is recommended for each torch when MIG welding to protect
the torch from overheating in the event of insufficient liquid flow.
Please note that the pump and motor will not be covered by warranty as variables such as coolant quality,
purity and coolant level, as well as the proper installation according to 2. and 3. are beyond our control.
Type: WK 23
Heat exchanger: 2-row
Immersion pump 50 Hz
(protection class IP 54):
– pump capacity: Qmax 35 l/min
– pump discharge: Hmax 32 m
Immersion pump 60 Hz
(protection class IP 54):
– pump capacity: Qmax 40 l/min
– pump discharge: Hmax 32 m
Cooling capacity
(RT=22° C): 1250 W at max. flow
1050 W at 1 l/min
Measures (WxDxL): 253x270x460 mm
Weight: 17 kg
Tank capacity: 7 l
WK 43
4-row
Qmax 35 l/min
Hmax 32 m
Qmax 40 l/min
Hmax 32 m
1575 W at max. flow
1320 W at 1 l/min
253x270x516 mm
18 kg
7 l
Technical data
Operating
instructions
Accessories
Pos. Description Specifications Order-no.Build group

Alexander Binzel Schweisstechnik GmbH & Co. KG
P.O. Box 10 01 53 • D-35331 Gießen
Tel.: ++49 (0) 64 08 / 59-0
Fax: ++49 (0) 64 08 / 59-194
Internet: www.binzel-abicor.com
Welding & cutting brought to the point.