ABSCO SHEDS A23151GKFD User manual

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 1
1620mm
2360mm
CONCRETE SLAB
10mm
50mm
WHEN LAYING YOUR CONCRETE
SLAB, CHAMFER THE 50mm EDGES
DOWNWARDS BY 10mm.
50mm
THIS WILL ENSURE THAT
CLEAR FROM YOUR SHED
WATER RUN OFF IS KEPT
DOWNLOAD
OUR APP FOR
ASSEMBLY
VIDEOS
PLEASE LEAVE A REVIEW
Tell us about your experience!
Visit www.abscosheds.com.au/review
AU: 1800 029 701
N Z: 0800 466 444
[email protected]
www.abscosheds.com.au

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 2
2 people Approx. 8 hours
8
5/16” Hex driver bit
Ladder Hammer drill Shifter
metal & masonry drill bits
to suit anchor fasteners
Pop riveterTinsnipsCordless drill
GENERAL INSTRUCTIONS
• Before commencing any assembly, read
through these instructions in detail to gain
a thorough understanding of assembly
methods and associated details.
• Unpack the carton and carefully identify
and check off all the parts against the
parts described and illustrated on
"COMPONENTS PACKING LIST" pages.
SITE PREPARATION
• The site for the shed must be level. An
uneven surface may result in misalignment
of parts.
• The shed shall be erected on top of a
reinforced concrete slab and anchored
down appropriately illustrated on “FINAL
CONSTRUCTION” page.
SAFETY NOTES
• Some parts may have sharp edges. It is
advisable to wear gloves when handling these
items and safety glasses if drilling holes.
Sensible shoes are highly recommended.
• Do not erect your shed in windy conditions.
• Ensure that the shed is securely anchored
to a solid foundation immediately after
construction is completed.
• It is highly recommended to erect the shed
with two or more people.
• Do not sit, stand or walk on the roof of your
shed.
NUMBER OF HOURS REQUIRED
ASSEMBLY DIFFICULTY
NUMBER OF PEOPLE REQUIRED
Basic Complex
TOOLS REQUIRED
RECOMMENDED
Personal protective
equipment for tools
Hand
Protection
Enclosed
Shoes
Raised work surface. EG
Sawhorses and timbers
Heavy and/or bulky. Multi-
person lift or mechanical aid.

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 3
SHEETING
QTY COMPONENT
DESCRIPTION
PART
No. CHK QTY COMPONENT DESCRIPTION
PART
No. CHK
1STEEL SHEET
1785 x 711mm 37A 1 STEEL SHEET 1980 x 773mm 42D
1STEEL SHEET
1785 x 773mm 30E 1 STEEL SHEET 1915 x 773mm 260C
4STEEL SHEET
1170 x 773mm 49A 1 STEEL SHEET 1915 x 773mm 36L
5MESH SHEET
1195 x 705mm MESH20 5STEEL SHEET 600 x 773mm 31D
INSTRUCTIONS AND FITTINGS PACKET
1DOOR PLATE 12A 1
8G x 10mm SELF
TAPPING SCREW
PACK QTY 220
FAST001
PACK220
63mm POP RIVET FAST009 15 8G x 20mm SELF
TAPPING SCREW FAST013
1PADBOLT
115mm LONG FAST006 1PADBOLT HASP FAST007
6
3/16 x 1/2”
CSK SCREW
& NUT
FAST004
FAST005 1PHILLIPS HD
DRIVER BIT FAST038
13mm
DRILL BIT DRILL 3CHANNEL JOINER CSJ
1
GABLE
LEFT
1105mm
17L 1
GABLE
RIGHT
1105mm
17R
1
RIDGE
BEAM
1513mm
97C 1 BRACE
350mm 13B
2GABLE
CAP 14A 1
PEAK
BRACE
450mm
15A

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 4
COMPONENT PACKING LIST
CHANNEL PACK
QTY COMPONENT
DESCRIPTION
PART
No. CHK QTY COMPONENT DESCRIPTION
PART
No. CHK
2CHANNEL
1112mm 315L 2 CHANNEL 1112mm 315R
1CHANNEL
1126mm 81DL 1 CHANNEL 1126mm 81DR
3CHANNEL
1785mm 80L 1 CHANNEL 1513mm 78C
1CHANNEL
1143mm 83L 1 CHANNEL 1143mm 83R
2CHANNEL
1498mm 150 2 CHANNEL 1498mm 151
2CHANNEL
712mm 58M 10 CHANNEL 712mm 181
1CHANNEL
1725mm 58B 1 CHANNEL 720mm 54G
1CHANNEL
1725mm 58A 2 CHANNEL 1513mm 81E
9JAMB
1785mm 70D 2 JAMB 1080mm 91E
1JAMB
1785mm 89A 1 JAMB 1785mm 89B
1JAMB
720mm 91D 1 JAMB 1204mm 70E
4LIP TRIM
1546mm 86A

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 5
SNAPTiTE ASSEMBLY GUIDE
The Snaptite Assembly System locks end channels to all roof and wall sheets without the need for
tools and fasteners.
To assemble each panel, the perimeter channels are secured to the top and bottom of each panel.
Gently tap the channel over the SNAPTiTE lugs on the sheet, working along the sheet.
Each perimeter channel must finish flush with the edges of the sheets. Simply tap the channel along
the sheets until each end is neatly flush. If you need to remove channels from the panels, slide it off
from the side.
Channel locks the shed panel into
position without the need for screws!
FASTENING SYMBOLS
Secure channel to sheeting by SNAPTiTE
fastening method.
Join components together with one
screw at this location only, as some
channels have extra holes that are not
required for this model of shed.
Do not join components together at
this location yet, as the screws may
obstruct further assembly of the other
components.
Join components together by pre-drill-
ing the holes first. Use one component as
template to mark where the holes are and
drill with a 3mm drill bit.
3mm pop rivet
4mm nut and bolt set.
D
SNAP
T TE
i

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 6
Guide on Joining Spliced Channels
The text marked on all parts must be shown on the same side as each other
Step 1.
Position the channels and the
CSJ joiner so the centre of
the CSJ is in line with the end
of each channel to be joiner
together.
Step 2.
Join the first channel to the CSJ
by inserting the centre of the
CSJ, on an angle, to the end of
the channel where the JOIN>>
text is marked.
Push down one side of the CSJ
until you hear a ‘click’.
Step 3.
Join the second channel to the
CSJ by positioning the <<JOIN
of the channel at the centre of
the CSJ, on an angle. Push the
CSJ into the channel until you
hear a ‘click’.
Finished Channel.
The joined channels should
now look like the picture with
the CSJ positioned equally
inside of the joined channels.
Drill out holes with 3mm drill
bit in CSJ to match the holes
in channel and secure with the
screws supplied.
These may have to be
temporarily removed during
assembly.
= =
JOIN>> <<JOIN
CSJ
==
JOIN>>
J
==
JOIN>> SJ
= =
JOIN>>
<<JOIN
= =
JOIN>> <<JOIN
Finished Spliced
Channel
Channel
Push
20mm 15mm
CSJ
.
...

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 7
Join together 6 x channel sections using 3 x channel joiners (Part CSJ)
2x 315L
2x 315R
1x 81DL
1x 81DR
2224mm
315R
81DR
315L
81DL
= 2x 315
= 1x 81D
PRE-ASSEMBLY OF SPLICED CHANNELS
NOTE: Some channels may have holes in them - You will
need to redrill holes where CSJ joining channel covers
them.
2252mm

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 8
ROOF OVERVIEW
49A
49A
49A
49A
14A
97C
78C
81E
81E
86A
86A
86A
86A

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 9
WALL OVERVIEW
Mesh panels not shown for illustrative purposes.
37A
12A
17L
70D
181
181
181
181
150
150
54G
181
70D
70D
17R
31D
31D
315
31D
315
181
151
80L
70E
70D
91D
36L
42D
83R
83L
15A
81D
260C

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 10
ROOF PANEL
2x required
FAST001 x3
49A
49A
FAST001 x6 Two prepunched holes
to this end of sheet.
SNAP
T
TE
i
SNAP
T
TE
i
81E
78C
86A
78C
86A
86A

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 11
RIGHT SIDE PANEL
1x required
80L
70D
151
70D
150
1.
70D
151
80L
70D
30E
31D 30E
150
151
70D
70D
80L
181

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 12
RIGHT SIDE PANEL
3.
SNAP
T TE
i
181
31D
FAST001 x2
4.
D
D
INSIDE VIEW
FAST001 x10
2.
Prepare a short
sheet
30
15
SNAP
T TE
i
181
31D
Notch out both bottom corners as
shown using tinsnips.

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 13
LEFT SIDE PANEL
1x required
1.
3.
2.
150
151
Prepare one
short sheet
FAST001 x7
30
15
SNAP
T TE
i
181
31D
Notch out both bottom corners as
shown using tinsnips.
89A
89B
70E
70D
80L
80L
150
89B
80L
89A
80L
70D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 14
LEFT SIDE PANEL
4. 5.
SNAP
T TE
i
54G
91D
181
31D
NOTE: 31D sheet is positioned
behind jamb 89B
INSIDE VIEW

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 15
DOOR PANEL ASSEMBLY
1x required
58A 58B
12A
37A
58M
SNAP
T TE
i
SNAP
T TE
i
58M
Narrow pan of sheet
to this side
20mm
Side channels of door
are to be orientated
opposite to top and
bottom channels.
Side channels are
positioned behind top
and bottom channel.
15mm
20mm flange
15mm flange
FAST006
FAST001 x12
FAST001 x4
D
D
D
D
D
D
D
D
D
D
D
D
D
D
Position 12A
midway along the
door.

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 16
91E
91E
37A
Using the jambs as templates
drill 3mm holes into the
sheet and secure with screws
from the outside of the
sheet.
Turn over the panel and fit
braces.
FAST001 x14
D
D
D D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 17
DOOR PANEL ASSEMBLY
Lay the LEFT SIDE PANEL
face up and lay the DOOR
PANEL down in the open
position on top as shown.
Using three rivets per hinge,
FAST009, secure the door to
the frame.
NOTE: Run the 3mm drill bit
through the punched holes
in the jamb before riveting
the hinge on.
FAST009 x6
D
D
D
D
D
D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 18
REAR PANEL ASSEMBLY
1x required
FAST001 x6
FAST001 x6
15A
INSIDE
OF
SHED
83R
83L
15A
81C
16L
42D
260C

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 19
FRONT PANEL
1x required
FAST001 x10
70D
70D
315
315
x2
70D
2.
Prepare three
short sheets
30
15
SNAP
T TE
i
181
31D
Notch out both bottom corners as
shown using tinsnips.
1.
SNAP
T TE
i
SNAP
T TE
i
SNAP
T TE
i
3.
181
181
181
31D
31D
31D

Absco Industries Assembly Instruction Manual
ABSCO CHICKEN COOP
MODEL: A23151GKFD
2.26mW x 1.52mD x 2.00mH
Model: A23151GKFD 25/07/2022 2.1 20
FRONT PANEL
INSIDE VIEW
4.
5.
17R
17L
FAST001 x18
FAST001 x9
Join the gable
panels 17L and
17R and move into
position as shown.
Drill and screw the
gable panels into
the top channel as
shown.
Fix the jambs from
the inside of the
front panel as
shown.
Fixings through
the 31D sheet will
need to be pre-
drilled.
D
D
DD
DD
Notch out both gable panels
as shown before fitting to top
channel. This allows side panel
to fit into front panel.
20 mm