ABSCO SHEDS EZISLIM 08081H HIGHSLIM User manual

PAGE 1
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
CONCRETE SLAB
10mm
50mm
WHEN LAYING YOUR CONCRETE
SLAB, CHAMFER THE 50mm EDGES
DOWNWARDS BY 10mm.
50mm
THIS WILL ENSURE THAT
CLEAR FROM YOUR SHED
WATER RUN OFF IS KEPT
880mm
880mm
FRONT: 0.78m
SIDE: 0.78m
HEIGHT: 2.035m
We thank you for choosing an Australian Made Shed. For further assistance please
visit our detailed instructional video library at http://www.absco.com.au/videos.php
At ABSCO Industries we are always looking to be number ONE, so please let us
know what you think of our instructions. Feedback makes us better.
[email protected].

PAGE 2
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
GENERAL INSTRUCTIONS
A NOTE ON SAFETY
•The site for the shed must be level.
•It is recommended that the shed be set on a 100mm concrete slab and
anchored down appropriately (refer page 16 for details).
•Anchor sets are not supplied as standard items with this product.
•Before commencing any assembly, read through these instructions in
detail to gain a thorough understanding of assembly methods and
associated details.
•Unpack the carton and carefully identify and check off all the parts
against the parts described and illustrated on pages three and four.
•Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
•Do not erect your shed in windy conditions, ensure that the shed is
securely anchored to a solid foundation immediately after construction is
completed.
•It is highly recommended to erect the shed with two or more people.
TOOLS REQUIRED
3mm
4mm OPTIONAL
SITE PREPARATION

COMPONENTS PACKING LIST - CHECK OFF ALL COMPONENTS
PAGE 3
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
COMPONENT
DESCRIPTION PART
No. CHECK COMPONENT
DESCRIPTION PART
No. CHECK
QTY QTY
2
1
1
1
2
2
2
2
1
2
2
1
2
1
1
STEEL SHEET
2035mm X 773mm H30
STEEL SHEET
852mm X 773mm 43T
STEEL SHEET
2035mm X 773mm H30F
DOOR SHEET
1974mm X 711mm H37A
54G
CHANNEL
L = 720mm
81J
CHANNEL
L = 773mm
HC2
CHANNEL
L = 1974mm
58M
CHANNEL
L = 712mm
54H
CHANNEL
L = 766mm
54F
61E
CHANNEL
L = 773mm
CHANNEL
L = 773mm
H80A
CHANNEL
L = 2035mm
HJ1
JAMB L= 2035mm
HJ2
JAMB L= 2035mm
CHANNEL
L = 773mm 58C

PAGE 4
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
COMPONENT
DESCRIPTION PART No. CHECK COMPONENT
DESCRIPTION PART
No. CHECK
QTY QTY
CONTENTS OF FITTINGS PACKET
COMPONENTS PACKING LIST - (CONT.) CHECK OFF ALL COMPONENTS
291A
JAMB L= 1080mm
91D
JAMB L= 720mm
188L
LIP TRIM L= 852mm
2
64mm CSK SCREW &
NUT SECURE HINGES
TO DOOR
120 SELF TAPPING
SCREWS
10mm 1DOOR
PADBOLT
1DOOR
PADBOLT
HASP
63mm POP RIVETS SECURE
HINGES TO DOOR
(ALTERNATIVE FIXING
METHOD)
1ASSEMBLY
INSTRUCTIONS 12A
1DOOR
STRAP
L: 165mm
22A
12 SELF TAPPING
SCREWS 20mm
REFER TO PAGE
15
1HC1
DOOR TRIM SIDE
CHANNEL WITH HINGES
FITTED L = 1974mm

VIEW OF ROOF COMPONENTS
PAGE 5
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081F 17/09/12
Absco EZISLIM Shed Model: 08081F
43T
81J
88L
81J
88L

VIEW OF WALL COMPONENTS
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081F 17/09/12
Absco EZISLIM Shed
Model: 08081F
PAGE 6
H30
H30F H30
61E
H80A
54H 91D
54F
61E
54F
58C
H80A
HJ1
HJ2
54G
58C
91A
H37A
58M
58A
58M
HC2
54H

PAGE 7
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
ABSCO ASSEMBLY INTRODUCTION
FASTENING SYMBOLS
The snap-tite assembly system locks most perimeter channels to all roof and wall
sheets without the need for tools and fasteners. The front door frame and door
assembly will require 3mm holes to be drilled where necessary.
To pre-assemble the four wall panels
and two roof panels, the perimeter
channels are secured to the top and
bottom of each panel using the
snaptite system, as detailed on the
following pages wherever you see
the symbol.
Position sheets on timbers,
trestles or partly over edge of
concrete slab.
Each perimeter channel must finish flush
with the edges of the sheets. the snap-tite
system allows adjustment for this
process by simply tapping the channel
along the sheets until each end is neatly
flush.
Join components together with one screw at this
location only, as some channel sections have extra
holes that are not required for this model of garden
shed
Do not join components together at this location yet,
as the screw may obstruct further assembly of other
components
4mm NUT & BOLT SET
3mm POP RIVETS
PUSH
PUSH
HIGH SIDE
HIGH SIDE
PUSH
HIGH SIDE
HIGH SIDE
After joining sheets together,
position channel over one end of the
sheets, gently tapping it over the
snaptite lugs, working along the
sheets to the other end.
HIGH SIDE
SNAP
T TE
i

PAGE 8
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
SIDE PANEL ASSEMBLY
LEFT SIDE PANEL
H30
H80A
61E
58C

PAGE 9
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
SIDE PANEL ASSEMBLY
RIGHT SIDE PANEL
H30
H80A
61E
58C

PAGE 10
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
H30F
54F
54F
REAR PANEL ASSEMBLY

PAGE 11
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
ROOF PANEL ASSEMBLY
43T
81J
81J
88L
88L

PAGE 12
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
54G
FRONT FRAME ASSEMBLY
91D
54H
HJ1
54H
HJ2
TOP
BOTTOM

PAGE 13
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
DOOR PANEL ASSEMBLY
20mm FLANGE
58M
58M
HC1
15mm FLANGE
H37A
H37A
HC2
12A
NARROW PAN
THIS SIDE
NOTE: THIS SHEET (H37A) IS 711mm WIDE BY 1974mm HIGH
NOTE: USE THE PRE-PUNCHED
COMPONENTS (HC1, HC2, 12A) AS
TEMPLATES FOR DRILLING 3mm
HOLES INTO THE SHEET (H37A)
714mm
MAXIMUM
WIDTH

PAGE 14
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
FRONT PANEL AND DOOR CONNECTION
ASSEMBLY PHOTOS
DOOR CONNECTION & JAMB ASSEMBLYCORNER DOOR JAMB ASSEMBLY
PADBOLT TO DOOR CONNECTIONPADBOLT & HASP CONNECTION
NOTE: PLEASE REFER TO
THE FOLLOWING PAGES
FOR FURTHER DETAIL

PAGE 15
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
PANEL CONSTRUCTION
NOTE: Take care to ensure that both front
and rear wall panels are not positioned
upside down. The top channel of each
panel is pre-punched for attaching roof
sheets. The base channels are not
pre-punched.
SIDE WALL PANEL CHANNELS
FIT INTO THE NOTCHED
FRONT AND REAR WALL
PANEL CHANNELS
CONNECT BOTH DOOR MULLION
SECTIONS WITH SIX 20mm SCREWS
EACH SIDE.
REMOVE AND REPLACE CORNER
SCREWS ONE AT A TIME DURING
CONSTRUCTION

PAGE 16
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
ROOF CONSTRUCTION AND ANCHORING OF SHED
DYNABOLT
BOLT & NUT
STEEL
ANGLE
SLAB
WALL
SHEET
- EACH ANCHOR CONSISTS OF ONE NUT, BOLT,
DYNABOLT AND STEEL ANGLE
- DRILL A 10mm HOLE INTO THE WALL SHEET
- DRILL A 10mm HOLE INTO THE CONCRETE
(NOT INCLUDED IN KIT)
ANCHORING OF SHED
LOCATION
OF 8
CONCRETE
ANCHORS
NOTE: IT IS IMPORTANT TO
COMPLETE THE STEPS ON
THIS PAGE BEFORE
PROGRESSING ANY FURTHER

PAGE 17
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
91A
91A
37A
DOOR PANEL ASSEMBLY
USING THE JAMBS AS
TEMPLATES, DRILL 3mm
HOLES INTO THE SHEET
AND SECURE WITH
SCREWS
H37A

NOTE: The two holes required to connect the padbolt hasp for each door have not been pre-punched, to
allow for proper alignment. Position the hasp centrally over the padbolt shaft, and drill 3mm holes and
secure with screws.
NOTE: NUTS AND BOLTS (SUPPLIED) MAY BE USED
INSTEAD OF POP RIVETS (SUPPLIED) BY SIMPLY
ENLARGING THE HINGE HOLE SETS IN THE JAMB
USING A 4MM DRILL BIT
PAGE 18
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 08081H 17/09/12
Absco EZISLIM Shed
Model: 08081H HIGHSLIM
FINAL CONSTRUCTION
CONNECT DOOR TO FRONT FRAME
FOR INTERNAL LOCKING
DOOR BOLT AND PAD PLATE CAN BE
RE-LOCATED TO INSIDE OF DOOR