Abtus CAT-RGB Series User manual

* Specifications are subject to changes without notice.
SPECIFICATIONS
ABtUS SINGAPORE PTE LTD www.abtussingapore.com
Mo el: CAT-RGB224T/AP3
** For detail and updated RS-232 Command protocol for programming, please visit and download from www.abtussingapore.com
INPUT: 2x5 BNC connector, RGBHV
2x3.5mm block connector for balance/un-balance au io
OUTPUT: 12xRJ45 Connector (for CAT-RGB212T/AP3)
24xRJ45 Connector (for CAT-RGB224T/AP3)
SELECTABLE INPUT: 2 : 1
COM PORT: 1x9 pin D-Sub Female Connector
POWER SOURCE: 100 to 230 VAC, 50/60Hz
DIMENSIONS: (430 x 240 x 44)mm | Weight : 1350 g
HOUSING: Metal
ACCESSORIES: Power Cor
2:1x24 VGA/Au io over Cat-5 Transmitter
Mo el: CAT-GA111R/AP3
1:1 VGA/Au io over Cat-5 Receiver
with Loop Out an Skew Control
RGB/Aud o CAT-5 Extender
Distributor Amplifier
INPUT: 1xRJ45 Connector
OUTPUT: 1x VGA/Stereo Au io (D-Sub 15pin/ 3.5mm mini jack)
1xRJ45 Connector (for loop out)
SKEW COMPENSATION: Digital a justment
LEVEL CONTROL: Yes
EQ CONTROL: Yes
MAX RESOLUTION: 1920 X 1200
DIMENSIONS: (130 x 94 x 26)mm | Weight : 340 g
HOUSING: Metal
ACCESSORIES: AC-DC Power A aptor 12V DC, 1A
CAT-RGB212T/AP3, 224T/AP3
SPECIFICATIONS CAT-GA111R/AP3

User Operat on Gu de
* Specifications are subject to changes without notice.
PRODUCT DESCRIPTION
The CAT-RGB224T/AP is a Distribution Amplifier Exten er System that allows either 1 of the 2 vi eo
signal/stereo au io to be sen to multiple isplay (*up to 24 isplays or 12 isplays for CAT-RGB112T/AP3)
over long istances of Cat-5e cable (*300meter point-to-point). It supports resolutions from VGA
(640x480) to WUXGA (1920x1200). Its receiver has a built-in equalization an gain control to a just
the focus an brightness as well as a enhance RGB Skew Compensation a justment. This improves
the VGA signal going thru the CAT- 5e cable with changes to R, G & B signals a juste in ivi ually,
signals are elaye as require for images to be overlai properly. It also come with a memorize &
lock function features when properly a juste .
BALANCE/UNBALANCE AUDIO & RJ-45 CONNECTION
PANEL VIEW (RECEIVER)
·Exten s VGA signal /stereo Au io over CAT-5e cabling
·Receives computer vi eo an stereo au io up to 1000 feet (305 meters) over CAT-5e UTP,
CAT-5e STP or CAT-6 UTP cable.
·Works well with monitors, projectors, HDTV an flat panels isplay
·Connects to multiple vi eo screen from either one of the two Input sources
·Supports resolutions from VGA (640x480) to WUXGA (1920x1200)
FRONT PANEL VIEW (TRANSMITTER)
PRODUCT HIGHLIGHTS
Item Descr pt on
1. RJ-45 Output port 17 to 24
2. RJ-45 Output port 9 to 16
3. RJ-45 Output port 1 to 8
4. Balance/Unbalance Au io Input port 1
5. Balance/Unbalance Au io Input port 2
Item Descr pt on
6. 5xBNC RGBHV Input port 1
7. 5xBNC RGBHV Input port 2
8. RS-232 I/O control port
9. Power Input. Before plugging in the power,
please check if power is AC 100~230V, 50/60Hz
1 2 4 5 6 7 8 93
Item Descr pt on
1. POWER Push Power to turn ON or OFF system
2. IR Inferre Receiver
Item Descr pt on
3. CH-1 Signal Input Select
CH-1 : Signal Input from CH-1
4. CH-2 Signal Input Select
CH-2 : Signal Input from CH-2
1 2 3 4
Item Descr pt on
1. EQ A justment
2. Gain A justment
3. R, G, B (LED, selection In ication)
4. Select Button
Selection of R, G or B for Slew a justment
5. Color Delay A justment Left
6. Color Delay A justment Right
RS-232 PROTOCOL AND CONTROL CODE
1 2 3 4 5 6
1. Commun cat on
Protocol
2. RS-232 Connect on 3. RS-232 Control Code
Control code format are of standard ASCII code
Following are the detail code and description: