AC Infinity CLOUDLINE AC-FKS4 User manual

USER MANUALUSER MANUAL
CLOUDLINE
AIR FILTRATION SYSTEM

3
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service.
If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com
and click contact for our contact information.
EMAIL
[e-mail]
WEB
www.acinfinity.com
LOCATION
Los Angeles, CA

4
PRODUCT
Air Filtration System 4", S-Series
Air Filtration System 6", S-Series
Air Filtration System 8", S-Series
Air Filtration System 4", T-Series
Air Filtration System 6", T-Series
Air Filtration System 8", T-Series
MODEL
AC-FKS4
AC-FKS6
AC-FKS8
AC-FKT4
AC-FKT6
AC-FKT8
UPC-A
819137022065
819137021891
819137022072
819137022911
819137022928
819137022980
MANUAL CODE CL2112X1

5
MANUAL INDEX
Manual Index .................................................................................
Product Warning ............................................................................
Interference from MH and HPS Lights ...........................................
Key Features .................................................................................
Product Contents ...........................................................................
Installation: Hanging ......................................................................
Installation: Motor Cap Orientation ................................................
Installation: Mounting .....................................................................
Installation: Filter & Ducting ...........................................................
Powering and Setup ......................................................................
Controller Mounting ......................................................................
Universal Infinity System ...............................................................
Compatibility ..................................................................................
Adding More Fans .........................................................................
Adding More Devices ....................................................................
Cleaning ........................................................................................
Programming .................................................................................
Maximum and Minimum Settings ..................................................
Other Settings ...............................................................................
Download the App .........................................................................
Add a Device .................................................................................
FAQ ...............................................................................................
Other AC Infinity Products ............................................................
Warranty .......................................................................................
Page 5
Page 6
Page 7
Page 8
Page 9
Page 11
Page 16
Page 17
Page 22
Page 27
Page 30
Page 35
Page 36
Page 38
Page 39
Page 40
Page 42
Page 58
Page 59
Page 60
Page 61
Page 64
Page 68
Page 69

6
Ensure your power source conforms to the electrical requirements of this product.
Check your local code restrictions for additional safety measures that may be needed for a
proper code compliant installation.
Read all instructions before installing and using this product.
If you are unfamiliar or have doubts about performing this product’s installation, seek the
services of a qualified, trained, and licensed professional. Inappropriate installation will void
this product’s warranty.
This product must not be used in potentially hazardous locations such as flammable,
explosive, chemical-laden or wet atmospheres.
Ducted products must always be vented to outdoor areas.
Do not cover power cords with rugs or other fabric materials.
This product has rotating parts. Safety precautions should be exercised during the installation,
operation, and maintenance of this product.
Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust openings as
it may cause electric shock, fire, or damage to this product. Do not block or tamper with this
product in any manner while it is in operation.
Do not depend on the on/off programming as the sole means of shutting power from this
product. Unplug the power cord before installing, servicing, or moving this product.
Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped,
or is damaged in any manner.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:

7
Certain grow light models with HID* ballasts that do not use electromagnetic shielding will
create an area of radio frequency interference (RFI). This can distort nearby frequency-sensitive
components like internet lines and climate sensors. RFI can be emitted from the ballast’s cords or
the ballast itself.
Follow these steps to ensure proper functionality and to prevent radio frequency interference from
affecting your sensor probe:
TIP 1
Keep the probe cord far away
from your ballast's cords to ensure
the controller properly detects
climate conditions.
You may also wrap the probe
cord and create a cone around
the sensor head with aluminum
foil tape.
TIP 2
Do NOT plug your grow light and
inline fan into the same duplex
outlet. Plug your grow light and
inline fan into separate power
strips and electrical sockets.
*MH, HPS, CMH, or CHPS
INTERFERENCE from MH and HPS LIGHTS

8
KEY FEATURES
CONTROLLER 69
Features automation controls
that activate the fan according
to temperature, humidity,
timer, and schedules.
DUAL BALL BEARINGS
The motor contains ball
bearings with a 67,000 hour
lifespan. Enables the fan to be
mounted in any orientation.
IP-44 PROTECTION
The inline duct fan is sealed
to Ingress Protection 44
standards, rated with high
resistance to liquids and dust.
ACTIVATED CARBON
Features RC412 1200+ IAV
Australian charcoal with high
adsorption rate to completely
block odor and scrub the air.
FLEXIBLE DUCTING
The outer layer is made of
dual PVC thermoplastic that
protects the aluminum from
cuts and tears.
SPEED CONTROLLER
Single button controller with
circular readout display that
enables fan speed control in
ten speeds.

9
PRODUCT CONTENTS
PREFILTER
CLOTH
(x2)
DUCT
CLAMP
(x2)
FLEXIBLE
DUCTING
(x1)
ROPE
CLIP
(x2)
CLOUDLINE S-Series
DUCT FAN
SYSTEM
(x1)
WALL
ANCHOR
(x4)
DUCT FAN
SCREW SET
(x4)
CLOUDLINE T-Series
FAN UNIT*
CARBON FILTER AND DUCTING
SMART
CONTROLLER 69
(x1)
WOOD SCREWS
(WALL HANG)
(x2)
HANGING
STRAPS
(x2)
WIRE
MOUNT
(x6)
PROBE
MOUNT
(x1)
VELCRO
TIES
(x4)
SPEED
CONTROLLER
(x1)
SENSOR
PROBE
(x1)
UIS M - 4PIN F
ADAPTER
(x2)
WOOD SCREWS
(WALL HANG)
(x1)
UIS F - 4PIN M
ADAPTER
(x1)
*S-Series includes CLOUDLINE LITE, T-Series includes CLOUDLINE
CONTROLLER
PLATE BOLTS
(x2)
CONTROLLER
PLATE BOLTS
(x2)
CARBON
FILTER
(x1)

10
PRODUCT CONTENTS

11
HANGING
INSTALLATION
To use this filter in intake applications, place the filter inside your grow space. Make sure the filter is
connected to your inline duct fan's intake end before completing the installation.
To use this filter in exhaust applications, place the filter outside of your grow space. Make sure the
filter is connected to your inline duct fan's exhaust end before completing the installation.
INTAKE AND EXHAUST
This fan can be used as either an intake fan or an exhaust fan in grow rooms and larger grow tents.
To achieve optimal whole space ventilation, the intake fan or opening - if not using a fan - must be
situated at a bottom corner of your grow space. The exhaust fan must be hung (shown below) or
mounted at the highest opposite corner possible.
Make sure the intake fan’s airflow arrow is pointing towards your grow space and the exhaust fan’s
arrow pointing away from your grow space.

12
INSTALLATION
HANGING DOWNWARD
Loop the two rope hangers around a pole and
the fan's bracket.
Clip the carabiners onto each other. Shorten
the loops as needed.
Make sure the fan's airflow arrow is pointing
towards your desired direction.
HANGING UPWARD
Loop the two rope hangers around a pole and
clip the carabiners onto each other. Shorten the
loops as needed.
Hang the fan by the duct flanges to secure it.
HANGING - ROPE CLIPS
NOTE: The motor cap may be rotated to appear right side up in grow applications. See page 16 to learn how to
rotate the motor cap. Rotating the motor cap will not void your warranty.

13
INSTALLATION
STEP 1
Loop the strap around the bracket and a pole.
HANGING - STRAPS
STEP 2
Slip the strap through the inner ladder lock slot
from the bottom.

14
INSTALLATION
STEP 3
Route the strap into the outer ladder lock slot
from the top. Adjust the length of the completed
loop as needed.
HANGING - STRAPS
STEP 4
Tuck the loose end through the center gap of the
ladder lock to secure the loop.

15
INSTALLATION
STEP 5(b) - Hanging Upward
To hang the fan right-side up, loop and
tighten the straps, as shown in steps 1-4,
around the pole.
Hang the fan by the duct flanges to secure it.
HANGING - STRAPS
STEP 5(a) - Hanging Downward
Let the fan hang by the pole once the straps
are secure.
Make sure the fan's airflow arrow is pointing
towards your desired direction.

16
INSTALLATION
STEP 1
When hanging the fan downwards, the motor
cap will appear upside down.You may rotate
this motor cap so that it appears right side up.
Unscrew the motor cap using a screwdriver.
MOTOR CAP ORIENTATION
STEP 2
Rotate the motor cap to your desired
orientation. Reapply the screws.
Rotating the motor cap will not void your warranty.

17
INSTALLATION
STEP 2
Remove the motor box from the flange bracket.
Remove the wind circle between the motor box
and the intake flange.
STEP 1
Unscrew the bolts from the rings using
a screwdriver.
MOUNTING

18
INSTALLATION
STEP 3
Use the flange bracket to set your desired fan
position. Mark the four mounting holes.
STEP 4
Drill four holes into the marked locations. Make
sure your mounting area is structurally sound
and free from obstruction.
MOUNTING

19
STEP 5
If you are mounting onto anything other than a
wood support or stud, insert the included four
wall anchors into the drilled mounting holes.
You may need to use a hammer to secure them
through the holes.
INSTALLATION
STEP 6
Align the flange bracket’s holes with the wall
anchors. Screw in four wood screws with a
screwdriver or drill to secure the flange bracket.
Make sure its airflow arrow is pointing in your
desired direction.
MOUNTING

20
INSTALLATION
STEP 8
Slide the motor box back into the flange
bracket, making sure its airflow arrow is
pointing in the same direction as the flange
bracket’s arrow. Screw the bolts back into the
plastic rings to secure the motor box to the
flange bracket.
STEP 7
Place the wind circle back into the intake flange.
MOUNTING