Accent 800 User manual

18664
Version 2.00
User’s Guide
Accent®800 Integrated and Dedicated Devices with NuVoice®Software
Applies to Accent 800 Models with
Serial Numbers 10000AC8 and Higher

Accent 800 User’s Guide: NuVoice 2
Copyright and Trademark Information
© 2017-2020 PRC-Saltillo. Non-commercial reprint rights for clinical or personal use granted with inclusion of copyright notice. Commercial use prohibited; may not
be used for resale. Contact PRC-Saltillo for questions regarding permissible uses.
Accent, CoreScanner, Empower, Essence, Freedom Switch, LAMP Words for Life, Look, NuEye, NuPoint, and NuVoice are trademarks of PRC-Saltillo.
The MINSPEAK®, SEMANTIC COMPACTION®, UNITY®, and UNIDAD® trademarks are under license from Semantic Compaction Systems, Inc. in the United States and
other countries.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by PRC-Saltillo is under license.
CAVIWIPES is a trademark of Metrex Research LLC.
Intel and Intel Atom are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Wi-Fi is a registered trademark of Wi-Fi Alliance.
Windex is a registered trademark of S. C. Johnson & Son, Inc.
WordPower is a trademark of Inman Innovations, Inc. © 2001-2019; All rights reserved. Used with permission.
Contact Information
Manufacturer
Authorized Representative in the EU
EU Importer
Prentke Romich Company
1022 Heyl Rd
Wooster, OH 44691
USA
Tel.: [phone] • [phone]
Fax: [phone]
Email: [e-mail]
Web: www.prentrom.com
Prentke Romich GmbH
Karthäuserstr. 3
D-34117 Kassel
Germany
Tel.: [phone]
Fax: [phone]
Email: [e-mail]
Web : www.prentke-romich.de
Liberator Ltd
“Whitegates”, 25-27 High Street
Swinstead, Lincolnshire NG33 4PA
UK
Tel.: [phone]
Fax: [phone]
Email: [e-mail]
Web: www.liberator.co.uk
Technical Support
To report unexpected operation of the device or an unexpected event related to the device, please contact PRC technical support by phone at 1-800-262-1990 or by
email at [e-mail].
Document Version
18664v2.00 ∙ 03/30/2020
Applies to:
•Model ACN800-30
•Accent 800-30 models with serial numbers 10000AC8 and higher
•Accent 800-30 integrated and dedicated devices with NuVoice software
For information on using an Accent 800 device with Empower software, view or download the Accent 800 User’s Guide for Empower from
https://www.prentrom.com/support/devices/accent-with-empower.
End User Licensing Agreement
You have acquired a PRC device which includes software licensed by PRC-Saltillo from Microsoft Licensing Inc. or its affiliates ("MS"). Those installed software
products of MS origin, as well as associated media, printed materials and "online" or electronic documentation (software) are protected by international intellectual
property laws and treaties.
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (EULA), DO NOT USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT PRC-
SALTILLO FOR INSTRUCTIONS. ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE
DEVICE, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE
This EULA grants you the following license:
•You may use the SOFTWARE only on your PRC device.
•NOT FAULT TOLERANT. THE SOFTWARE IS NOT FAULT TOLERANT. PRC-SALTILLO HAS INDEPENDENTLY DETERMINED HOW TO USE THE SOFTWARE AND MS
HAS RELIED UPON PRC-SALTILLO TO CONDUCT SUFFICIENT TESTING TO DETERMINE THAT THE SOFTWARE IS SUITABLE FOR SUCH USE.
•NO WARRANTIES FOR THE SOFTWARE. THE SOFTWARE is provided "AS IS" and with all faults. THE ENTIRE RISK AS TO SATISFACTORY QUALITY,
PERFORMANCE, ACCURACY, AND EFFORT (INCLUDING LACK OF NEGLIGENCE) IS WITH YOU. ALSO THERE IS NO WARRANTY AGAINST INTERFERENCE WITH
YOUR ENJOYMENT OF THE SOFTWARE OR AGAINST INFRINGEMENT. IF YOU HAVE RECEIVED ANY WARRANTIES REGARDING THE DEVICE OR SOFTWARE,
THOSE WARRANTIES DO NOT ORIGINATE FROM, AND ARE NOT BINDING ON, MS.
•Note on Java Support. The SOFTWARE may contain support for programs written in Java. Java technology is not fault tolerant and is not designed,
manufactured, or intended for use or resale as online control equipment in hazardous environments requiring fail-safe performance, such as in the operation
of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life support machines, or weapons systems, in which the failure of
Java technology could lead directly to death, personal injury or severe physical or environmental damage. Sun Microsystems, Inc. has contractually obligated
MS to make this disclaimer.
•No Liability for Certain damages. EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL CONSEQUENTIAL OR
INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF
ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. IN NO EVENT SHALL MS BE LIABLE FOR ANY AMOUNT IN EXCESS OF U.S. TWO HUNDRED FIFTY DOLLARS
(U.S. $250.00).
•Limitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse engineer, decompile, or disassemble the SOFTWARE, except and
only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.
•SOFTWARE TRANSFER ALLOWED BUT WITH RESTRICTIONS. You may permanently transfer rights under this EULA only as part of a permanent sale or transfer
of the Device, and only if the recipient agrees to this EULA. If the SOFTWARE is an upgrade, any transfer must also include all prior versions of SOFTWARE.
•EXPORT RESTRICTIONS. You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply with all applicable international and
national laws that apply to the SOFTWARE, including U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued
by U.S. and other governments. For additional information see http://www.microsoft.com/exporting/.

Accent 800 User’s Guide: NuVoice 3
Contents
The Accent® 800 is a speech-generating device that offers user-friendly features to make speaking fast and easy for
individuals with severe speech impairments. This manual describes how to use and maintain your device.
Safety Information................................................................................................................................................. 5
A Quick Look at Device Features............................................................................................................................ 7
Front View .................................................................................................................................................................7
Back View ..................................................................................................................................................................8
Left Side View............................................................................................................................................................9
Right Side View..........................................................................................................................................................9
Turning on the Device.......................................................................................................................................... 10
Using the Touchscreen......................................................................................................................................... 10
Charging the Battery............................................................................................................................................ 11
Cleaning and Disinfecting the Device ................................................................................................................... 12
Positioning or Removing the Stand...................................................................................................................... 14
Positioning the Stand ..............................................................................................................................................14
Removing the Stand ................................................................................................................................................14
Removing or Reattaching the Handle................................................................................................................... 15
Attaching the Top Port Cover............................................................................................................................... 15
Mounting the IR Reflector on an Integrated Device ............................................................................................. 16
Applying a Screen Protector ................................................................................................................................ 18
Removing or Replacing the Device Frame ............................................................................................................ 19
Removing the Frame ...............................................................................................................................................19
Attaching the New Frame .......................................................................................................................................20
Attaching the Frame More Securely........................................................................................................................21
Attaching, Raising, and Removing a Keyguard ..................................................................................................... 22
Attaching the Keyguard ...........................................................................................................................................22
Raising the Keyguard ...............................................................................................................................................23
Removing the Keyguard ..........................................................................................................................................23
Attaching or Removing a TouchGuide.................................................................................................................. 24
Attaching the TouchGuide.......................................................................................................................................24
Removing the TouchGuide ......................................................................................................................................24
Attaching a Carry Strap........................................................................................................................................ 25
Attaching a Strap Handle ..................................................................................................................................... 26
Attaching a QRM Mounting Plate ........................................................................................................................ 27
Mounting a NuPoint Module ............................................................................................................................... 28
Getting Started with the NuVoice Software......................................................................................................... 29
Putting the Device to Sleep/Waking the Device .....................................................................................................29
Restarting the Device ..............................................................................................................................................29
Powering Off the Device..........................................................................................................................................29
Selecting a Vocabulary ............................................................................................................................................30
Using the Exploration Wizard..................................................................................................................................32
Accessing the Toolbox .............................................................................................................................................32
Changing the Vocabulary ........................................................................................................................................32
Replacing the Vocabulary........................................................................................................................................32
Changing the Voice..................................................................................................................................................33
Turning Speech On or Off........................................................................................................................................33

Accent 800 User’s Guide: NuVoice 4
Adjusting the Volume..............................................................................................................................................33
Correcting the Pronunciation of a Word .................................................................................................................33
Changing the Access Method ..................................................................................................................................33
Accessing the Setup Key..........................................................................................................................................34
Customizing a Key ...................................................................................................................................................34
Taking Your Own Photo to Use on a Key.................................................................................................................34
Disabling and Enabling the Toolbox ........................................................................................................................35
Backing up Your Vocabularies .................................................................................................................................35
Updating the NuVoice Software via a Wi-Fi®Connection .......................................................................................36
Updating the NuVoice Software via USB Flash Drive ..............................................................................................36
Finding Additional Information............................................................................................................................ 36
Appendix A: Compliance Information .................................................................................................................. 37

Accent 800 User’s Guide: NuVoice 5
Safety Information
Emergencies
This device is not intended to be an emergency call device or sole communication aid.
Cleaning, Maintaining, and Servicing
Do not attempt to service or maintain the device while it is in use. Disconnect the charger and turn off the device before cleaning or
disinfecting the device.
If your device or an accessory is damaged, call Service for assistance. Do not attempt to make repairs yourself.
Accessories
Do not use accessories, detachable parts, or materials not described in this manual.
Do not use accessories, detachable parts, or materials in any other way than described in this manual.
Mounting and Positioning
Any mounts used should be fitted by a qualified person. Failure to install the mounting system according to the manufacturer's
instructions may result in an injury to the user. Be certain that the user’s view is not obstructed by the mounting.
Analysis of positioning by a qualified person is required to prevent repetitive stress injuries to the user.
Vision and Hearing
Consult your vision care provider about device positioning considerations for the user.
Excessive volume or sound pressure level when using earphones or headphones can cause hearing loss over extended periods of
time. Set the volume at a low level and increase it only enough that you can hear comfortably.
Small Parts, Cords, Cables, and Straps
Cords, cables, and straps are potential entanglement or strangulation hazards. Please consider this prior to placing these items with
device users.
Visually inspect cables and connectors for damage on a regular basis. If any cable or connector is damaged, call Service for a
replacement.
Always use cables, whether for charging or transferring vocabulary files, according to the instructions in this manual.
Small parts could present a choking or other hazard.
If the stand is removed, it becomes a potential hazard for poking an eye. Store it in a safe location.
The user could pinch a finger when closing the stand.
The stylus is a potential hazard for poking an eye.
Screen
Do not use the device if the screen is cracked or broken.
Interference
When operating this device in a medical environment, do not use with any product that is not medically approved. Follow all rules
for appropriate wireless device use.
Do not use this device close to sources of RF/RFID radiation or you may encounter interference. Move away, if possible, from the
source of the interference.
Water
If your device has been exposed to water, each USB port must be completely dry before a USB cable is inserted into it. To remove
moisture from the USB ports, shake the device several times with each USB port facing downward, and then use a microfiber cloth
to wipe the device dry. You should then check the USB port area again. If moisture is still visible in any USB port, repeat the shaking
and drying procedure.
Your device is intended for use in normal communication situations. It is not waterproof, so use extreme caution when using it
around water. As with most electronic devices, you should never use the device when you are actually in the water (for example, a
pool or bath).

Accent 800 User’s Guide: NuVoice 6
Batteries and Charging
Use only the battery charger provided with your device.
Do not place the device where it is difficult to operate or difficult to disconnect from the charger.
Always follow the instructions in this manual when charging your device.
Do not insert any object into the charging port. This can result in damage to the port.
To avoid electric shock and damage to your device, do not charge the device while it is wet or in an area where it could get wet. Do
not handle the device, charger, or cords with wet hands.
Locate the device in a safe, dry location while charging. Do not charge the device outdoors.
Keep the charger away from water and do not allow water or any other liquid to be spilled on it.
If the charger or charger cord is damaged, call Service for a replacement.
Heat
Do not place the device in an appliance such as a microwave or oven, near an open flame, or on or near a source of heat such as a
stove or heater.
Do not leave the device in a hot vehicle for a prolonged period.
Oxygen-Rich Environment
Do not take the device into an oxygen-rich environment (operating room, oxygen tent, etc.).
Touching the Surface
Touching the surface of the device with broken skin may aggravate a wound.
Infants or high-risk groups should not touch the surface of the device if there is a chance of burning the skin.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained between a handheld wireless mobile device and an implantable medical device,
such as a pacemaker, implantable cardioverter defibrillator, vagus nerve stimulator, shunt, or stent, to avoid potential magnetic interference
with the medical device. Persons who have such devices:
•Should ALWAYS keep the mobile device a minimum of six (6) inches from their implantable medical device;
•Should not carry the mobile device in a breast pocket;
•Should move the mobile device away from themselves immediately if there is any reason to suspect that it is interfering with the
implantable medical device;
•Should read and follow the directions from the manufacturer of the implantable medical device. If you have any questions about
using your wireless mobile device with an implantable medical device, consult your health care provider.

Accent 800 User’s Guide: NuVoice 7
A Quick Look at Device Features
Front View
1 Handle 8 Volume button
2 Microphone 9 Microphone
3 Front camera 10 Battery/charging LED
4 Light sensor 11 Power LED
5 Camera indicator 12 Display screen
6 Power button 13 Tools key
7 Carry strap holders
1
2
3
4
5
13
7
7
7
7
8
9
12
6
10
11

Accent 800 User’s Guide: NuVoice 8
Back View
1 Handle 9 QRM mounting plate location (plate optional)
2 Mini USB connector for NuPoint®head tracker
(accessible when handle is removed)
10 Replaceable battery (under battery cover)
11 Battery cover screws
3 Attachment point for handle or NuPoint head tracker 12 Headphone jack
4 Rear camera113 Switch jack B2
5 SD card slot 14 Switch jack A2
6 USB 3.0 port 15 Charging port
7 USB 2.0 ports 16 HDMI port
8 External access mini port
1Your device ships with a thin transparent protective cover over the rear camera lens. To remove the
cover, carefully slide a fingernail under the edge of the cover and peel the cover off the lens. Be
careful not to scratch the lens.
2If you use a switch or switches for access to your device, plug them into switch jacks A and B. To use
a joystick, you will need a Y-adapter. If you have a joystick plugged in and it does not respond
normally, reverse the way it is plugged in (plug switch A into jack B, switch B into jack A).
1
2
3
3
4
9
10
11
11
11
5
6
7
8
12
13
15
16
14
7
11
11
11

Accent 800 User’s Guide: NuVoice 9
Left Side View
1 External access mini port 4 USB 3.0 port2
2 USB 2.0 port15 SD card slot
3 USB 2.0 port1
1The USB 2.0 ports support USB 2.0 and USB 1.0 accessories.
2The USB 3.0 port supports USB 3.0, USB 2.0, and USB 1.0 accessories.
Right Side View
1 Charging port 4 Headphone jack
2 Switch jack A * 5 HDMI port
3 Switch jack B *
* If you use a switch or switches for access to your device, plug them into switch jacks A and B. To use
a joystick, you will need a Y-adapter. If you have a joystick plugged in and it does not respond
normally, reverse the way it is plugged in (plug switch A into jack B, switch B into jack A).
2
3
4
1
5
1
2
3
4
5

Accent 800 User’s Guide: NuVoice 10
Turning on the Device
1. Press and hold the power button located on the top edge of the device. When you hear a beep,
release the button. The green power LED will illuminate. The LED will remain illuminated while the
device is on and while the device is in sleep mode.
2. Wait for the NuVoice® software to load. This will take about 45 seconds.
3. First time only: Review the NuVoice Software Agreement and select I Agree. The Exploration Wizard
will load.
4. Once the Exploration Wizard loads, check the battery status level. For details, see “Charging the
Battery” on page 11.
Using the Touchscreen
Important! Do not use sharp, pointed objects on the touchscreen. The touchscreen is designed to be used
with your finger or the stylus that came with your device. This stylus is made specifically for a capacitive
touchscreen. Anything else will harm your touchscreen and may cause your device to stop working.
The touchscreen is a liquid crystal display (LCD). Should the display break (unlikely except in extreme
circumstances) and you come into contact with the liquid crystal, wash and rinse your skin thoroughly. Be
careful to avoid splintered glass.
The touchscreen is very sensitive. Fingerprint smears, dust, grime, saliva, etc. will affect its performance.
The screen also reacts to raindrops and extremes in temperature (condensation).
To dust the touchscreen, use a soft, lint-free cloth. For heavier cleaning, use a slightly dampened, lint-
free cloth and then dry the screen with another soft, lint-free cloth.

Accent 800 User’s Guide: NuVoice 11
Charging the Battery
Important! Always use the battery charger that came with your device. Any other charger may damage
the battery.
How long the battery lasts depends on how you use your device. You may be able to get up to 18 hours
of use from one charge, or you may use your device so heavily that a charge only lasts about 10 hours.
Check the battery status next to the battery icon in the status display area to quickly view the battery’s
charge level. You can also check the Maintenance Menu’s Battery Menu for battery information.
The time required to fully charge the battery varies depending on the charge level when the charge
begins. When the device needs charging, locate the charging port on the back of the device and connect
the battery charger.
Charging a Dangerously Low or Dead Battery
To fully charge a dangerously low battery will take about 10 hours. If the battery is totally dead, an
additional two hours may be required. Please note that battery status next to the battery icon in the
status display area will not show a charge for the first few hours of charging. A battery that is not fully
depleted will require less time to recharge.
Note: If you need to use the device immediately, plug in the battery charger and leave it plugged in
while using the device.
Best Practice
Plug in your battery charger every night when you go to bed and any time you see the low battery
warning and/or see the low battery LED come on. If you cannot plug in the charger overnight, it is best
to power off the device to conserve battery charge.
The Battery/Charging LED
When the device is on and the charger is NOT plugged into the device:
•The battery/charging LED is not illuminated.
•When the battery has less than 15% (about three hours) of its power remaining, the
battery/charging LED will glow red.
When the device is plugged into the charger:
•If the device is on: The battery/charging LED will glow yellow. When the device is fully charged,
the LED will turn green.
•If the device is off: The battery/charging LED will glow yellow. When the device is fully charged,
the LED will turn off.
Disposing of the Device or Battery
Device Disposal: Please dispose of your device in accordance with your local, state, and/or federal electronic
recycling laws.
Battery Disposal: If the battery in your device needs to be replaced, dispose of the old battery in accordance
with your local, state, and/or country regulations.

Accent 800 User’s Guide: NuVoice 12
Cleaning and Disinfecting the Device
If your device will only be used by one person, routine cleaning and disinfecting should be sufficient. If,
however, more than one person will be using the device, take additional measures to clean and disinfect
the device after it has been used by one person before allowing it to be used by another.
Disconnect the charger and turn off the device before cleaning or disinfecting the device.
Routine Cleaning and Disinfecting
Important! Do not use solvents or abrasives or spray water or cleaner on the screen or case.
Cleaning the Case
Before cleaning the case or the display, turn the device off. Clean the case with a slightly dampened,
lint-free cloth. Dry the case thoroughly with another lint-free cloth before turning the device on.
Cleaning the Touch Screen
The touch screen is very sensitive. Fingerprint smears, dust, grime, saliva, etc. will affect its
performance. The screen also reacts to raindrops and extremes in temperature (condensation).
To dust the touch screen, use a soft, lint-free cloth. For heavier cleaning, use a slightly dampened, lint-
free cloth and then dry the screen with another soft, lint-free cloth.
Cleaning Keyguard Frames, Keyguards, and TouchGuides
All of these accessories can be removed from the case and washed in hot, soapy water. Dry them
thoroughly before putting them back on the device. The best practice for regular cleaning is to dry
accessories by hand, lay them on a dry towel, and let them air dry for about 5 minutes before placing
them back on the device.
Disinfecting
To disinfect everything but the display, use a solution of vinegar and water (¼ cup vinegar to 1 cup
water). Wipe the case (not the display) using a cloth dampened with this solution.
Wash the keyguard frame, keyguard, and TouchGuide separately with the vinegar and water solution.
Allow all equipment to air dry. Do not use vinegar and water on the display!
What about drooling/saliva?
Any saliva should be wiped up immediately, especially on the touch screen or around any of the
connectors. Use a slightly dampened, lint-free cloth to wipe the device.
What about spills, rain, or accidental immersion?
If you spill liquid or any runny substance on your device; if you're caught in a downpour; or if the device
is accidentally dropped in liquid, immediately dry the device as thoroughly as possible. Try using the
device. If it does not work, call the PRC Service Department and tell them what happened. They may ask
you to send in your device for servicing.

Accent 800 User’s Guide: NuVoice 13
Disinfecting a Device and Accessories for Multiple Users
Note: This section applies only when more than one person will be using the same device. In that
situation, it’s vital to effectively disinfect the device and accessories that have been used by one person
before allowing it to be used by another.
First Step: Put on protective gloves
Next Step: Clean the device and accessories
1. Wipe down the device and accessories with disinfectant wipes (Virucidal, Bactericidal,
Pseudomonacidal, Tuberculocidal, Fungicidal)—Metrex CaviWipes™. Follow the disinfectant
product manufacturer’s instructions for cleaning.
2. Take a Q-tip with cleaner applied (for example, Windex® or another commercial cleaner) and clean
inside all cracks and crevices. You may want to use a toothbrush or similar brush.
3. Blow the device off with an air hose or wipe it dry.
Important! Make sure all soil is removed from the device and accessories. This is vital before
proceeding to disinfecting the equipment.
Next Step: Disinfect the device and accessories
1. Wipe down the device and accessories with a new disinfectant wipe (Virucidal, Bactericidal,
Pseudomonacidal, Tuberculocidal, Fungicidal)—Metrex CaviWipes. Follow the disinfectant product
manufacturer’s instructions for disinfecting.
2. Make sure to clean inside all cracks and corners, and wipe more than once if necessary to keep the
device wet for a minimum of three (3) minutes.
3. Allow the device and accessories to dry.
Final Step: Wipe the touch screen
1. When the device and accessories are dry, wipe down the viewing area (device touch screen,
TouchGuide, keyguard, etc.) with glass cleaner, so the screen doesn’t discolor.
2. Allow the equipment to dry.

Accent 800 User’s Guide: NuVoice 14
Positioning or Removing the Stand
Do not carry the device by the stand. When carrying the device, use the handle or carry strap.
Positioning the Stand
The stand provides two viewing positions. When latched against the back of the device, the stand provides
a slight angle for viewing the screen when the device is sitting on a flat surface. When you need an
additional angle, extend the legs of the stand away from the back of the device by doing the following:
1. Place the device face-down on a flat surface.
2. Rotate the stand away from the back of the device.
3. Allow the stand to latch in the fully extended position.
Stand latched against
the back of the device
Stand latched in the
fully extended position
Removing the Stand
If you do not want to use the stand, you can remove it from the back of the device. You can reattach it
at any time.
1. Place the device face-down on a flat surface.
2. Using a Phillips screwdriver, remove the screws from the holders at the top of each of the stand’s legs.
3. Pull the holders free and put the holders, screws, and washers in a safe place in case you need to
use them later. Alternatively, you can reinsert the screws and washers in the holes in the device.
Loose holders, screws, and washers could be a choking hazard.
4. Spread the legs apart to pull them out of the holes in the back of device.
5. Pull the stand free and put it in a safe place in case you need to use it later.
Important! If you reattach the stand, be sure to secure the legs with the holders to prevent
someone from pulling it loose accidentally.
Screw and
washer
Note: A washer is located under
each screw. Be sure to keep the
washers with the screws.

Accent 800 User’s Guide: NuVoice 15
Removing or Reattaching the Handle
To remove the handle from the device:
1. Using a Phillips screwdriver, remove the two screws that hold the handle in place.
2. Pull the handle away from the device.
3. If you are not going to mount a NuPoint module, it is important to attach the port cover to protect
the mini USB connector. See “Attaching the Top Port Cover”.
To reattach the handle:
Remove the port cover or NuPoint module, line up the holes in the handle with the holes on the back of
the device, and insert the two screws.
Attaching the Top Port Cover
If you removed the handle and are not going to mount a NuPoint module, it is important to attach the
port cover to protect the Mini USB Connector on the top of the device.
1. Line up the holes in the cover with the holes on the back of the device.
2. Insert and tighten the two screws that previously secured the handle.
To remove the port cover:
Remove the two screws that hold the port cover in place. Use the screws to mount a NuPoint module or
to reattach the handle.
Note: Store the port cover where you can find it if you need to use it again.
Screw
Screw

Accent 800 User’s Guide: NuVoice 16
Mounting the IR Reflector on an Integrated Device
Note: Infrared (IR) functionality is only available on integrated devices.
Your device emits infrared signals from the IR area on the back of the device. The optional IR reflector
allows the user to better “aim” those signals from any position. If you have the IR reflector, follow these
instructions to attach it to the device.
The IR reflector can be mounted on the device handle, port cover, or NuPoint module, depending on
which is already attached to your device. The reflector kit includes the reflector, two short screws, and
two long screws.
1. Using a Phillips screwdriver, remove the appropriate screws, as shown.
Handle: If the handle is attached to your device and the front device frame is held in place with
screws, remove the top frame screws.
NuPoint Module: If a NuPoint module is attached to your device, remove the two inside screws
from the module.
Port Cover: If a port cover is attached to your device, and the front device frame is held in place with
screws, remove the top frame screws.
2. Align the holes in the reflector with the empty holes in the handle, port cover, or NuPoint module.
Important! Make sure the reflective shield is aimed downward toward the back of the device, as
shown in step 3 on the next page.
Remove these two screws, if present
Remove these two screws, if present
Remove these
two screws

Accent 800 User’s Guide: NuVoice 17
3. Insert the appropriate screws in the holes, as shown.
4. Tighten the screws.
Handle:
NuPoint Module:
Port Cover:
Insert the two
short screws
Insert the two
long screws
Insert the two
short screws
Reflector side
pointing downward
Reflector side
pointing downward
Reflector side
pointing downward

Accent 800 User’s Guide: NuVoice 18
Applying a Screen Protector
If you plan to use a screen protector, you must first remove the device frame. To remove the frame, see
“Removing or Replacing the Device Frame” on page 19.
There are six screen protectors in the kit. Three have a matte finish and three have a luster finish. The
matte finish offers the most glare resistance. Matte protectors can be identified by the small red square
on the backing.
1. Turn your device off and lay it flat on a table.
2. Remove dust and fingerprints from the screen using a lint-free cloth dampened with water or flat-
screen TV cleaner.
Hint: Do not dry the screen before applying the screen protector. You may find it easier to smooth
out the protector and remove air bubbles (step 7 below) if the screen is slightly damp.
3. Peel a screen protector from its backing.
4. Hold the protector along the edges, with the side that was against the backing now facing the screen.
5. Align one edge of the protector with one edge of the screen.
6. Press the protector onto the screen, adjusting the protector until it covers the screen along all edges.
7. Use the squeegee included to smooth out the protector and remove air bubbles and wrinkles.
8. Wipe the protector with a lint-free cloth to remove any fingerprints.
Hint: Regularly wipe off the protector with a damp lint-free cloth to remove fingerprints, smudges,
etc. If the protector becomes too dirty, peel it off and replace it with a new protector.

Accent 800 User’s Guide: NuVoice 19
Removing or Replacing the Device Frame
Your device came with a frame mounted on it. If you need to remove or replace the frame, follow these
instructions.
Removing the Frame
1. If you are using a keyguard or TouchGuide, remove it from the frame. See “Removing the Keyguard”
on page 23 or “Removing the TouchGuide” on page 24.
2. Using a Phillips screwdriver, remove the four
screws that secure the frame to the device—two on
top and one on each side.
3. Grasp one side of the frame and pull it loose
from the device.
Important! Store these screws in a safe location in
case you later decide to reattach the frame.
Loose screws could be a choking hazard.
Hint: You may want to use a flat-head
screwdriver or similar tool to gently lift
the side and bottom tab on the back of
the device.
4. Grasp the other side of the frame and pull it
loose from the device.
5. Pull the tabs on the top of the frame out of
the slots on the device.
6. Pull the tab on the bottom of the frame out of
the slot on the device.
7. Proceed to the next section, “Attaching the
New Frame”.
Screws
Note: When you pull
the other side loose,
the top or bottom
tabs (steps 5 and 6)
may pull out at the
same time.

Accent 800 User’s Guide: NuVoice 20
Attaching the New Frame
You must attach the device frame before you can mount a keyguard or TouchGuide over the screen.
1. Press one side of the frame onto the edge of
the device.
2. Pull the other side into place.
Note: The top tabs and/or bottom tab may snap
into place as you pull on the side.
Note: You can start with either the left side or
the right side.
3. If necessary, pull the top tabs into place.
4. If necessary, pull the bottom tab into place.
5. Look along the inside edge of the frame along the top, bottom, and sides to make sure the rubber
backing didn’t bunch up between the frame and the edge of the device. In this example, the rubber
is bunched up, leaving a gap between the frame and the edge of the device.
If necessary, lift up the inside edge slightly and press until the rubber backing fits smoothly between
the frame and device.
6. To secure the frame to the device with screws, proceed to the next section, “Attaching the Frame
More Securely”.