AccessPRO PROCKEY User manual

Remote Control Key Fob
PROCKEY

Introduction
It is a four-channel wireless keychain that operates at a
frequency of 433 Mhz. It is only compatible with the
PROKEYPADW kit and receiver. It has four buttons
which work to activate each of the 4 different outputs
of the receiver
• Button A active output 1.
• Button B activates output 2.
• Button C activates output 3.
• Button D activates the ringer.
.

Specifications
•Number of channels: 4
•Operating frequency: 433 MHz
•Operating distance: 50 meters of line of sight
•Operating Voltage: 12 V
•Weight: 32 g
Battery Installation
1. Remove the screws from the back of the control
2. Remove the cover carefully to avoid damaging the
internal circuitry.
3. Install the battery taking care to correctly polarize the
control.
4. Replace the back cover of the control.
5. Screw the rear cover.
Operation
1. Press the corresponding button to activate the desired
output.
2. The led lights up indicating that the keyfob is emitting
the wireless signal.
3. The equipment consumes energy while it is activated,
accidental activations will shorten the life of the battery
and can activate an output when it is not desired