7
www.acclaimlighting.com
Back Next
Please select the colors
to represent each channel
Red
Blue
None
Green
White
1:
3:
5:
2:
4:
Other5:
Back Next
Please explain what each channel is used for
Light
Light
Light
Light
1:
3:
2:
4:
8 Confirm the colors which
will be controlled by each
channel on your fixtures.
If your fixtures have are any
non-color attributes, such
as master intensity or zoom,
choose the None option
against those channels.
9 Tap Next to continue.
7 What happens next will be determined by the choice you made in the last step:
•If you chose the Varying option, the wizard will terminate at this point as it has received
all the information it needs. You can now jump to using presets, see page 8.
•If you chose any option between 1 Channel and 7 Channels, the next two screens will
allow you to optionally define what each channel does. If you take a moment to define
these, it will help when you are programming fixtures and will also ensure that the color
representations shown for the stored presets are more accurately portrayed.
Back Finish
Please select how you
would like to use your fixtures
Fixtures Individually Controlled
10 Confirm which channels will
be directly controlling color
(Light) output and which will
be performing Other duties,
such as master intensity or
zoom. Generally, if you chose
None against any channels
in the previous step, you
should choose Other against
those same channels in this
step.
11 Tap Next to continue.
12 Choose how you wish
to program your fixtures;
individually or grouped:
•Choose Fixtures
Individually Controlled to
program them separately.
•Choose Fixtures Group
Controlled to program
them collectively using
one set of controls (your
fixtures will all show the
same output).
13 Tap Finish to complete the
configuration and exit the
wizard.
