AutoAqua Smart ATO micro SATO-120P User manual

Model
SATO-120P
Manual

Smart ATO micro
Controller
Power Adapter
DC Refill Pump
Universal Tube Ho der
Siphon Break
Tubing 6.5 ft (200 cm)
1. Power Input : 100-240 VAC 50-60 Hz
2. DC Pump : ‧ Head : 8.2 ft (250 cm)
‧ Flow Rate : 74 gph (280 lph)
3. Max Mounting Thickness : 1/2 inch (12.7 mm)
1.Controller & Optical Level Sensor
with wet side magnet
2.Dry side magnet
3.Max mounting thickness :
1/2 inch (12.7 mm)
Universal Power Supply
Head : 8.2 ft (250 cm)
1.Fix the water tube
2.Applicable on rimed tank and
rimless tank
3.Max mounting thickness :
1/2 inch (12.7 mm)
Used with DC refill pump
A connector to break the siphon
Item

1. Mount the optical level sensor on the tank/sump.
2. Plug the siphon break into the tubes, keep it higher than the water
level of the reservoir, and set up the water tube by the universal holder.
3. Connect both of the DC pump and power adapter with the controller
and then connect power.
Siphon break must be higher than the
water level in the reservoir.
Air In : Siphon break allows air in to break
the siphon when the pump turns off.
Water Out : Water drops out of the hole
are normal when the pump is on.
ReservoirTank/Sump
DC Refill Pump
Power
Optical Level Sensor
LED Indicator
LED Color
* Please check the tank/sump and then reset (unplug and replug power cable)
Status Meaning
Blue LED
Red LED*
Light on
Flashing
Flashing with audible alert
Power on
Refilling / Pumping
1.Empty Reservoir
2.Bubble noise
Direction
Air In
Water Out
Installation

Warranty Period
One year from the purchased date
Place of Purchase Service
Purchased Date
(Store name, phone, email, address)
(Y/M/D)
Limited Warranty
Quick Security Technology (QST)
Smart Smart ATO micro uses QST for real-time protection against any failure situation.
The controller will give anaudible and visualalert when it senses any other
refilling time is 3 times longer than the first refilling time. For example, if the first
refilling time is 10 sec, it will alert when any other refilling time is over 30 sec.
* Note : No security time control for the first refilling.
Notice
1. Please read the manual before the installation. Keep the power
adapter dry and avoid any contact with water to prevent any malfunction.
2. Avoid setting up sensor in an area with micro bubbles or direct lighting.
3. The arrow icon on the siphon break needs to be set upwards.
1. Limited warranty is provided by AUTOAQUA only if your AUTOAQUA Product
("Product") was purchased from an authorized distributor or an authorized reseller.
2. All warranty repairs or replacement are performed by the authorized distributor or
authorized reseller in the region where the Product was first shipped by AUTOAQUA.
3. The limited warranty is valid for a period of 1 year under proper installation and
normal use from the date of the original purchase listed on the proof of purchase
or sales receipt.
4. In the event of a limited warranty claim, proof of purchase or sales receipt (issued
to the original purchaser) is required.
AUTOAQUA Technologies Co., Ltd.
7F-7.,NO.229,Fuxing 2nd Rd.,Zhubei
City, Hsinchu County,Taiwan
E-mail : [e-mail]
www.autoaqua.com.tw
* Please go to AUTOAQUA website to
get the distributor information.