Accu-Chek Mobile User manual

1
User’s Manual
and Quick Start Guide
Blood Glucose Monitoring System
Haende_waschen
Do Do not
2
3
4
Wash your hands with warm water and soap and
rinse well. Dry your hands thoroughly with a clean
towel before obtaining blood.
Do not perform a blood
glucose test if your fingers
are unwashed, soiled or
sticky (for example, due to
food or drink residue).
Always use a small, fresh and well-formed blood
drop.
Do not perform a blood
glucose test with a smeared
or spread blood drop. Do not
smear the blood drop on the
test area.
Touch the test area gently and steadily when applying
the blood drop. Apply the blood drop to the centre of
the test area.
Do not press the test area
and the finger together.
Avoid trembling or shaky
movements.
Apply the blood drop to the test area immediately
after you have obtained the blood drop. Remove your
finger from the test area when the beep tone sounds
and Test in progress is displayed. Note: You can only
hear the beep tones when they are turned on. See
Setting tones in the User’s Manual.
Do not wait before applying
the blood drop to the test
area. Do not continue to hold
your finger on the test area
after the beep tone sounds
and Test in progress is
displayed.
WIMPORTANT INFORMATION FOR PERFORMING A BLOOD GLUCOSE TEST
An incorrectly performed blood glucose test may lead to incorrect test results which can cause the wrong therapy recommendation to be made and thus produce serious
adverse health eects. Therefore, follow these instructions carefully to perform a blood glucose test correctly.
IMMEDIATELY! DO NOT WAIT!
C
© 2015 Roche Diabetes Care
ACCU-CHEK, ACCU-CHEK MOBILE, ACCU-CHEK SMART PIX,
ACCU-CHEK 360° and FASTCLIX are trademarks of Roche.
CONTINUA, the CONTINUA logos and CONTINUA CERTIFIED are trademarks,
service marks, or certification marks of the Continua Health Alliance.
CONTINUA is a registered trademark in some, but not all countries in which
this product is distributed.
The USB-IF Logos are trademarks of Universal Serial Bus Implementers
Forum, Inc.
MRoche Diabetes Care GmbH
Sandhofer Strasse 116
68305 Mannheim, Germany
www.accu-chek.com
07438877001(01) – 2015-05 M_Version02_Rev3
0
q
e
w
1
9
2
3
4
5
6
7
8
W
The Accu-Chek Mobile
meter and Accu-Chek
FastClix finger pricker are
intended for patient self-
monitoring by an
individual person only.
They must not be used to
test blood glucose from
more than one person as
they do not incorporate any
features to guard against
cross-infection. The meter
and the finger pricker are
not to be shared between
family members or used by
healthcare professionals to
obtain blood or test blood
glucose from more than one
person.
This Quick Start Guide does
not replace the detailed
User’s Manual for your
Accu-Chek Mobile blood
glucose monitoring system.
Be sure to comply with the
safety information in the
User’s Manual and in the
package insert of the test
cassette.
1Release button (priming
and pricking)
2Power and enter button
3Down/Up buttons
4Window showing number
of available lancets
5Lever for loading a new
lancet
6Rotatable cap for setting
the penetration depth
7Tip cover, closed (below
right: open)
8Test area (at the tip of the
cassette ready for a test)
9Lancet drum
0Slide button to release
the finger pricker
qSlide button to open the
cassette compartment
cover
wTip cover
eTest cassette
Why
An incorrectly performed blood
glucose test may lead to falsely
elevated blood glucose results
and thereby delivery of an
inappropriately high insulin
amount. Falsely elevated test
results are caused by the
following:
• Fingers are unwashed, soiled
or sticky.
• If the blood drop spreads on
the finger or if the blood drop
becomes smeared on the test
area, the risk of contamination
of the test area increases (for
example, due to food or drink
residue on the finger).
• The test area is pressed
against the finger.
• Trembling or shaky
movements during the blood
glucose test.
• The blood glucose test is not
performed immediately or the
finger stays on the test area
for too long. Pay attention to
the beep tone. The beep tone
helps you to obtain a reliable
test result.
Quick Start Guide
Start Here
ExA LAN
Approved according to „SOP 04.07.04 – elwo“! The Signature will not be printed!
ONR 7192 – 4all 4692 V4/1 – man_07438877001_01_EN_154x127mm – Black
(2015) Frau Ritzerfeld V4/2 – man_07438877001_01_EN_154x127mm – Cyan
Prüfmittelnummer n/a V4/3 – man_07438877001_01_EN_154x127mm – Magenta
V4/4 – man_07438877001_01_EN_154x127mm – Yellow
man_07438877001_01_EN.indd 5-6 13.05.2015 16:22:11

kim_manual_0270
kim_manual_0090
Open the test cassette box at
the perforation. Take out the
plastic container.
Remove the new test cassette
from the plastic container.
Open the tip cover.
kim_manual_0240
Push the slide button for the
cassette compartment cover
upwards in the direction of the
arrow.
Insert the test cassette in the
meter. Press the cassette
compartment cover closed.
Close the tip cover.
Pull the protective strip of the
batteries backwards out of the
meter. Remove the protective
film from the display.
kim_manual_0180
Press for about 2seconds
until the meter turns on.
Use to select a language
(highlighted in yellow).
Press .
Press .
kim_manual_0390
Remove the cap from the finger
pricker.
Do not remove the lancet drum
until all 6lancets have been
used.
kim_manual_0400
kim_manual_0410
Insert the new lancet drum,
white end first.
Place the cap back on again.
The cap is on correctly when it
is pushed back as far as it will
go, and you hear and feel it
click into place.
Rotate the cap until the desired
penetration depth lines up with
the indicator.
Tip: When obtaining blood, start
with a medium penetration
depth, such as 3.
Loading a new lancet: Prepare
the finger pricker for obtaining
blood again.
Push the lever
1 in direction A
and then back again in
directionB.
Wash your hands with warm
water and soap and rinse well.
Dry your hands thoroughly with
a clean towel before you obtain
blood.
Before you perform a blood
glucose test: Observe the
important instructions on
performing a blood glucose test.
Open the tip cover. Press the finger pricker firmly
against the selected puncture
site.
Press the release button all the
way down.
Touch the centre of the test
area gently and steadily with
the blood drop.
Testing is complete after
approximately 5seconds. Read
the test result and close the tip
cover.
1
3
2
Take your finger away from the
test area as soon as Test in
progress appears on the screen.
1
4
2
5
3
6
7 8 9
1. Starting to use the blood glucose monitoring system 2. Preparing the finger pricker 3. Performing a blood glucose test Customer Support and Service Centre
The lancet drum is properly
inserted when it is completely
inside the finger pricker and
only the front edge protrudes.
H
The cap can only be easily
placed on up to the stop
position when the lancet drum
is completely inside the finger
pricker. Do not use force to
place the cap on. This might
damage the cap and finger
pricker. Instead, correct the
position of the lancet drum.
kim_manual_0260
Last update: 2015-02
C
© 2015 Roche Diabetes Care
ACCU-CHEK, ACCU-CHEK MOBILE and
FASTCLIX are trademarks of Roche.
MRoche Diabetes Care GmbH
Sandhofer Strasse 116
68305 Mannheim, Germany
www.accu-chek.com
tear here
Australia
Accu-Chek Enquiry Line: 1800 251 816
Pump Support: 1800 633 457
www.accu-chek.com.au
Singapore
Accu-Chek ExtraCare line: 6272 9200
www.accu-chek.com.sg
United Kingdom
Roche Diabetes Care Limited
Charles Avenue, Burgess Hill
West Sussex, RH15 9RY, United Kingdom
Accu-Chek Customer Careline 1)
UK Freephone number: 0800 701 000
ROI Freephone number: 1 800 709 600
1) calls may be recorded for training purposes
www.accu-chek.co.uk
www.accu-chek.ie
07438877001(01) – 2015-05 M_Version02_Rev3
kim_manual_0400
kim_manual_0430
kim_manual_0440
4 5
A
B
• 1
Haende_waschen
1 2
53 4
8
67
man_07438877001_01_EN.indd 7-12 13.05.2015 16:22:31

User’s Manual
Blood Glucose Monitoring System
ONR 7192 – 4all 4692 V2/1 – man_07438877001_01_EN_154x127mm – Black
(2015) Frau Ritzerfeld V2/2 – man_07438877001_01_EN_154x127mm – PMS 287 CVC
Prüfmittelnummer n/a
man_07438877001_01_EN.indb 1 11.05.2015 14:05:11

2
These instructions for use feature the following 3 symbols:
W
This symbol indicates a possible risk of injury
or of damage to your own health or to the
health of others.
H
This symbol draws attention to actions that could
result in damage to the meter, the test
cassette or the finger pricker.
i
This symbol draws your attention to important
information.
W
Keep the blood glucose monitoring system and
all its components away from children under the
age of 3 years. There is a risk of suocation if
small parts (e.g. covers, caps or similar objects)
are swallowed.
Last update: 2015-02
man_07438877001_01_EN.indb 2 11.05.2015 14:05:11

3
Intended use
Accu-Chek Mobile blood glucose meter
Meter for quantitative determination of blood glucose values in fresh capillary blood using
Accu-Chek Mobile test cassettes.
Suitable for self-testing only.
W
• The Accu-Chek Mobile meter and Accu-Chek FastClix finger pricker are intended for patient
self-monitoring by an individual person only.
They must not be used to test blood glucose from more than one person as they do not incorporate
any features to guard against cross-infection. The meter and the finger pricker are not to be shared
between family members or used by healthcare professionals to obtain blood or test blood glucose
from more than one person. This meter and finger pricker are therefore not suitable for professional
use in healthcare facilities and institutions.
• Visually impaired people must be assisted by a sighted person when performing a blood glucose
test.
Accu-Chek FastClix finger pricker
Finger pricker with adjustable penetration depth for obtaining capillary blood from the fingertip with
Accu-Chek FastClix lancet drums and, when a special AST cap is used, also from alternative sites
(AST = alternative site testing), such as the palm.
W
The Accu-Chek FastClix finger pricker is intended for personal use only!
It may only be used by one and the same person for obtaining blood.
There is a risk of infections being transmitted if the finger pricker is used by other people, even by
family members, or if healthcare professionals use this finger pricker to obtain blood from dierent
people. This finger pricker is therefore not suitable for professional use in healthcare facilities and
institutions.
man_07438877001_01_EN.indb 3 11.05.2015 14:05:11

4
Contents
Intended use � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3
The major features � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
About this User’s Manual� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6
1 Getting to know your meter and finger pricker������������������������������������7
2 Steps before testing �������������������������������������������������������14
3 Preparing the finger pricker �������������������������������������������������21
4 Performing a blood glucose test ����������������������������������������������27
5 Selecting settings ���������������������������������������������������������45
6 Using the meter as a diary ��������������������������������������������������64
7 Analysing test results on the PC ����������������������������������������������70
8 Acoustic mode �����������������������������������������������������������89
9 Checking the meter��������������������������������������������������������94
10 Tools menu �������������������������������������������������������������101
11 Cleaning the blood glucose monitoring system ���������������������������������107
12 Changing the batteries ����������������������������������������������������114
13 Testing and storage conditions����������������������������������������������117
14 Messages and problems���������������������������������������������������120
15 Discarding the blood glucose monitoring system��������������������������������129
16 Technical data�����������������������������������������������������������130
17 System components ������������������������������������������������������133
18 Customer Support and Service Centre ����������������������������������������134
19 Index ������������������������������������������������������������������135
20 Explanation of symbols ����������������������������������������������������138
21 Appendix ���������������������������������������������������������������140
man_07438877001_01_EN.indb 4 11.05.2015 14:05:11

5
The major features
• Test cassette instead of test strips
50 test areas on a continuous tape
• Test
Test starts by opening the tip cover
• Measuring time
About 5seconds for a test, depending on the
blood glucose concentration
• Docked finger pricker
Use the finger pricker in its docked or undocked
state
• Finger pricker with lancet supply
6sterile lancets in a lancet drum
• Automatic coding
Meter is automatically coded
• Control over amount of blood
Meter detects the amount of blood that is
necessary
• Luminous display
Yellow display on black background
• Text-supported operation
Meter takes you through all operation steps
• Menu-driven operation
Menu-driven settings and functions
• Reminder
A total of 7 reminders and 4 test reminders
• Target range for test results
Personal target range for blood glucose values
• Flagging of results
Flagging results with symbols
• Memory
2,000 memory locations available
• Data analysis on a PC
Display and analysis of data on a PC
• Data transfer
USB port for data transfer
• Error messages
Displays an error code and a message
man_07438877001_01_EN.indb 5 11.05.2015 14:05:11

6
CLICK
About this User’s Manual
Read this User’s Manual carefully and completely before testing blood glucose for the first time. If you
have any questions, contact the customer support and service centre (see page134).
These instructions for use provide you with the information you need to operate and care for your meter
and finger pricker, and for troubleshooting. Be sure to operate the meter and the finger pricker correctly
as well as to observe the operating instructions.
Note: All dates, times or results displayed on the screens in this User’s Manual are intended only as
examples. Results are displayed in the unit mmol/L, dates in the format Day.Month.Year and times in
24-hour format.
You can only hear the beep tones of the meter when they are turned on and the volume level is not set to
1 (Mute). This User’s Manual presumes that the beep tones are turned on (see Setting tones page49).
All instructions appear as shown in the example below.
Press the cassette
compartment cover closed.
The cassette compartment cover
must close with an audible
CLICK.
1Title bar of the illustration with
number or illustration title
Illustration of the instructions
Instructions (bluefont)
Information on instructions
(blackfont)
man_07438877001_01_EN.indb 6 11.05.2015 14:05:12

7
1
Getting to know your meter and finger pricker
Getting to know your meter and finger pricker
Overview of meter
6
1
2
7
8
9
e
r
3
4
5
0
q
w
man_07438877001_01_EN.indb 7 11.05.2015 14:05:19

8
Getting to know your meter and finger pricker
1
Overview of finger pricker
tRelease button (priming and pricking)
zLever for loading a new lancet
uLancet drum containing 6 lancets
iNumerical values for penetration depths
(11 settings)
oRotatable cap for setting the penetration depth
pPin-hole opening for lancet
aPenetration depth indicator
sWindow showing number of available lancets
1Battery door (above right: open)
2Batteries (see page114 and page130 for
information on possible battery types)
3Display
4Finger pricker (docked)
5Power and enter button
6Down/Up buttons
7Tip cover, closed (below right: open)
8Test area (at the tip of the cassette, ready for
atest)
9USB port – interface to be used for data
analysis on a computer (below left: open USB
port)
0Type plate
qSlide button to release the finger pricker
wSlide button to open the cassette compartment
cover
eCassette compartment cover (below right:
open)
rTest cassette (in place in the meter)
t
z
i
u
p
a
s
o
man_07438877001_01_EN.indb 8 11.05.2015 14:05:22