Roche Diabetes Care, Inc.
9115 Hague Road
Indianapolis, IN 46256
www.accu-chek.com
ACCU-CHEK, ACCU-CHEK GUIDE, SOFTCLIX, and MYSUGR
are trademarks of Roche.
APPLE, APPLE logo, and APP STORE are trademarks of Apple Inc.
GOOGLE PLAY is a trademark of Google Inc.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
Roche is under license.
© 2021 Roche Diabetes Care
08100942005-0121
WARNING
• Keep new and used batteries away
from children. See the User’s
Manual for additional information.
• This Quick Start Guide does not replace the
User’s Manual for your Accu-Chek Guide blood
glucose meter. The User’s Manual contains
important cleaning and disinfecting procedures
and additional information.
• The meter and lancing device are for single
patient use. Do not share them with anyone,
including other family members! Do not use on
multiple patients!
• All parts of the kit are considered biohazardous
and can potentially transmit infectious
diseases from bloodborne pathogens, even
after you have performed cleaning and
disinfecting.
Start Here
Quick Start Guide
For in vitro diagnostic use only
ENGLISH
Set the Meter Language
Turn the meter on by briefly
pressing . Language appears.
Press or to highlight the
desired language.
1
2
Press to set the language and
return to Main Menu.
Overview
1 Display
2 Back Button
3 Up Arrow and Down Arrow
Buttons
4 Power/Set/OK Button
5 Test Strip Slot with Light
6 Battery Door
7 Micro USB Port
8 Test Strip Ejector
28
7
6
1
4
5
3
This file may not print or view at 100%.
Die lines and color breaks do not print.
Roche USA – 83229
V4/1 – 08100942005 – Black
Roche USA – 83229
V4/2 – 08100942005 – Cyan
Roche USA – 83229
V4/3 – 08100942005 – Magenta
Roche USA – 83229
V4/4 – 08100942005 – Yellow
Blood Glucose Monitoring System
To find diabetes management apps
that are compatible with your meter,
visit www.accu-chek.com.
NOTE
• Always have a spare set of batteries.
• Battery life may vary due to factors such as
temperature and battery manufacturer.
Connect the Accu-Chek Guide meter to the mySugr app
Using your smartphone,
download the mySugr app
from the App Store or Google
Play and create your mySugr
account.
Turn on Bluetooth®on your
smartphone (if it’s not on
already).
1 2
3 4
Open the mySugr app, and
select Connections on the
menu. Select Accu-Chek
Guide, and then Connect now.
Follow the step-by-step
directions for pairing.
After your meter is successfully
connected to the mySugr app,
data from your device is
imported automatically. Now
you can easily keep your
diabetes data under control!
Wash and dry your hands before
and after you perform a blood
glucose test.
Check the Use By date on the
test strip container. Do not use
test strips past the Use By date.
Remove a test strip from the
test strip container. Close the
cap tightly.
Insert the metallic end of the
test strip into the meter.
The meter turns on. Preparing
to test appears.
Perform a Blood Glucose Test
Press the lancing device firmly
against the side of your fingertip
and press the yellow release
button to prick your finger.
Touch the yellow edge of the test strip to the blood drop. Remove
your finger from the test strip when Analyzing appears. Do not put
blood on top of the test strip.
The test result appears on the
display in less than 4 seconds.
Remove the lancing device cap.
Point the lancet away from you.
Slide out the ejector to release
the lancet.
12 43
5 6 Before you finish…
Familiarize yourself with the
Accu-Chek Softclix lancing
device.
1
Get a lancet from the pocket in
the carrying case.
Remove the cap by pulling it
straight off. Do not twist the
cap.
Insert the lancet into the lancing
device until it clicks.
Replace the cap on the lancing
device. Make sure the notch on
the cap lines up with the notch
on the lancing device.
Adjust the lancet depth to a
comfortable penetration level.
Start at 2. For tougher skin, dial
to a higher number.
Press the priming button in as
far as it will go, like a pen. Do
not press the release button
while pressing the priming
button. The release button turns
yellow when the lancing device
is ready.
Set the lancing device aside
until you are ready to perform a
fingerstick.
Ejector
Release button
Cap Priming
button
Penetration depth
Set up the Lancing Device
2 43 5
Twist off the lancet's protective
cap.
6 7 8 9
83229_08100942005.indd 183229_08100942005.indd 1 1/24/2021 6:25:52 PM1/24/2021 6:25:52 PM
