Acer G277HL. User manual

LCD Monitor Quick Setup Guide
Safety Instructions
Observe the following safety guidelines when connection and using your monitor:
zBe sure that your monitor is electrically rated to operate with the AC power available in your location.
zLocate your monitor near an easily accessible electrical outlet.
zPlace the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or touched with a sharp or abrasive
implement.
zPut your monitor in a location with low humidity and a minimum of dust.
zNever use your monitor if the power cable has been damaged. Do not allow anything to rest on the power cable, and keep the cable away from where
people could trip over it.
zNever insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.
zTo avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor's case.
zBe sure to hold the plug, not the cable, when disconnecting the monitor from an electrical outlet.
zOpenings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid
using the monitor on a bed, sofa, rug, or other soft surface.
zDoing so may block the ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some other enclosed space, be sure to
provide adequate ventilation.
zDo not expose the monitor to rain or use it near water. If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately.
You can clean the exterior of the monitor with a damp cloth when necessary, but be sure to unplug the monitor first. If your monitor does not operate
normally-in particular, if there are any unusual sounds or smells coming from it -unplug the monitor immediately and contact an authorized dealer or
service center.
Package Contents
Attaching the monitor to the base
1. Remove the monitor base from the packaging and place it on a stable and level workspace.
2. Remove the monitor from the packaging.
3. Attach the the monitor stand arm to the base.
• Ensure that the base is locked onto the monitor stand arm. (for selected models)
• Secure the base to the monitor stand arm by turning the white screw using the integrated tab or a suitable coin. (for
selected models)
Connecting Your Monitor to a Computer
1. Turn off your monitor and unplug your computer’s power cord.
2. 2-1 Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
2-2 Connect Digital Cable (Only Dual-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the monitor
and connect the other end to the computer's port.
2-3 Connect HDMI Cable (Only HDMI-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
3. Connect one end of the adapter to the monitor and the other end to a properly
grounded, AC outlet.
4. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer. This sequence is very important.
External Controls
LCD
monitor
AC power
cable
DVI cable
(optional)
VGA cable
(optional)
HDMI cable
(optional) AC adapter Quick start
guide
Icon Item Description
Power button/indicator Turns the monitor on/off.
Blue indicates power on. Amber indicates standby/power saving mode.
Minus / plus If the OSD is active, press the Minus or Plus button to toggle between the
OSD options.
OSD functions Press to view the OSD. Press again to enter a selection in the OSD.
Auto adjust button / exit If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, press Auto and the monitor will automatically optimize the display position,
focus, and clock of your display.
Empowering key Press the Empowering Key to open the Acer eColor Management OSD and
access the scenario modes.
/
able
(optional)
Audio c
4 Connect the Audio Cable (Only Audio-Input Model)(Optional)
2-
English
LCD MONITOR
G277HL
User Guide
AUDIO IN
DC-IN
DVI-D IN
VGA IN
HDMI
VGA

LCD Monitor Quick Setup Guide
Regulations and safety notices
FCC notice
This device has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device
does cause harmful interference to radio or television reception, which can be determined by turning
the device off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the device and receiver.
zConnect the device into an outlet on a circuit different from that to which the receiver is connected.
zConsult the dealer or an experienced radio/television technician for help.
CE declaration of Conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and
other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and RoHS
Directive and Directive 2009/125/EC with regard to establishing a framework for the setting
of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance
with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B
limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in
interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority,
which is granted by the Federal Communications Commission, to operate this product.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Notice: Canadian users
Disposal of Waste Equipment by Users in Private Household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of
with your other household waste. Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the recycling of waste electrical
and electronic equipment. The separate collection and recycling of your waste equipment at the
time of disposal will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment. For more information about where you can
drop off your waste equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
English

H236HL
H236HL
H236HL
H236HL
LCD Monitor Quick Setup Guide
SPECIFICATION
Driving system TFT Color LCD
Size
Pixel pitch
Brightness 250cd/m2(Typical)
Contrast 100,000,000:1Max (ACM)
Viewable angle 1780(H) 1780(V)
Response time 5 ms
LCD Panel
Video R,G,B Analog Interface
H-Frequency 64KHz – 83KHz
System input V-Frequency 50-75Hz
Display Colors 16.7M Colors
Dot Clock 173MHz
Max. Resolution 1920 x 1080 @ 60Hz
Plug& Play VESA DDCCI/DDC2B
On Mode
Sleep Mode 0.4 W (typ.)
Power
Consumption
(at 200 nits) Off Mode 0. W (typ.)
D-Sub
DVI-D 24pin (Only Dual-Input Model)
Input Connector
HDMI (Only HDMI-Input Model)
Analog:0.7Vp-p(standard),75 OHM, Positive
Input Video Signal Digital signal (Only Dual-Input Model) )
HDMI signal (Only HDMI-Input Model)
Speakers
Maximum Screen Size
Power Source
Operating Temp: 50to 350C;
Environmental Considerations Storage Temp.: -20 to 600C;
Operating Humidity: 10% to 85%
Dimensions
Weight (N. W.)
Power Button, Input/Right, Left, MENU/ENTER, Auto adjustment/ Exit,
Switch Empowering Key
Brightness, Contrast, H.Position, V.Position, Focus, Clock, Colour Temp, Auto
External Controls: configuration(only Analog input model), OSD timeout, Wide Mode, DDCCI
Functions ON/OFF, ACM ON/OFF, Input signal Selection (only Dual or HDMI
input model), Language, Reset, Display information,Exit
* All specifications are subject to change without notice.
Regulatory Compliance
zH06/05V~,042-001retpadA
G277HL

  
5
40
27.0” W (69 cm)
0.311mm (H) x 0.311mm
(V)
26.0 W (typ.)
1.5W x 2 (Only
Audio-
Input Model)(Optional)
(WxHxD)
mm
kg Unit (net)
621.7
4.3
x
454.0
x203.1
Horizontal :
Vertical : 597.88 mm, 336.312 mm
English