Acer VA241Y User manual

English
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage
it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of
any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside
this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is dam aged.
Package contents
LCD monitor Power cord Audio cable
(optional)
DVI cable
(optional)
VGA cable
(optional)
HDMI cable
(optional)
Quick start
guide
VA 24 1Y
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the base. (for selected models).
3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)
4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the VGA (optional) and /or DVI-D
(optional) and/or HDMI (optional) input socket of the monitor, and
the VGA (optional) and/or DVI-D (optional) and/or HDMI (optional)
output socket of the graphics card on the computer. Then tighten the
thumbscrews on the signal cable connector.
3. Optional: Connect the audio input socket (AUDIO IN) of the LCD
monitor and the line-out port on the computer with the audio cable.
4. Insert the monitor power cable into the power port at the back of the
monitor.
5. Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
VGA
VGA

English
External controls
1&2 Power button Turns the monitor on/off. Blue indicates power on. Amber indicates
standby/ power saving mode.
3&4 </> Minus / Plus If the OSD is active, press the Minus or Plus buttons to toggle
between the OSD options. If the OSD is inactive, press the Minus
or Plus buttons to adjust the volume. (Optional)
5 Menu OSD functions Press to view the OSD. Press again to enter a selection in the
OSD.
6 Auto Auto If the OSD is active, press Auto to exit the OSD. Once the OSD is
inactive, press Auto and the monitor will automatically optimize the
display position, focus, and clock of your display.
7Empowering
Key
Press this button to select scenario mode.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to radio or television reception, which can be
determined by turning the device off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and
other relevant provisions of EMC Directive 2014/30EU, Low Voltage Directive 2014/35/EU, and RoHS
Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting
of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance
with EMC regulations.
Notice: Peripheral devices
Onlyperipherals(input/outputdevices,terminals,printers,etc.)certiedtocomplywiththeClassB
limitsmaybeattachedtothisequipment.Operationwithnon-certiedperipheralsislikelytoresultin
interference to radio and TV reception.
Caution
Changesormodicationsnotexpresslyapprovedbythemanufacturercouldvoidtheuserauthority,
which is granted by the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Notice: Canadian users
CAN ICES-3(B)/NMB-3(B)
Restriction on Hazardous Substances statement (India)
This product complies with the “India E-waste Rule 2016” and prohibits use of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1
weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.

English
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not
be disposed of with your other household waste. Instead, it is your responsibility to
dispose of your waste equipment by handing it over to a designated collection point
for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that protects human
health and the environment. For more information about where you can drop off your
waste equipment for recycling, please contact your local city ofce, your household
waste disposal service or the shop where you purchased the product.

English
SPECIFICATION
LCD Panel
Driving system TFT Color LCD
Size 23.8"W (60cm)
Pixel pitch 0.275mm(H) x 0.275mm(V)
Brightness 250cd/m2(Typical)
Contrast 100,000,000:1Max. (ACM)
Viewable angle 178° (H) 178° (V) (CR≥10)(Typical)
Response time 5ms (GTG,Typical)
Panel Type In-Plane Switching
Video Digital Interface
H-Frequency 30KHz~80KHz
V-Frequency 55Hz~75Hz
Display Colors 16.7M Colors
Dot Clock 170MHz
Max. Resolution 1920 x 1080@60Hz
Plug & Play VESA DDCCI/DDC2B
Energy Efciency Class A
*Annual Energy Consumption 31(kWh) (for HDMI-input Model)
Power consumption
@200cd/m2
ON Mode 16.91W(typ.)
Sleep Mode 0.34W(typ.)
Off Mode 0.25W(typ.)
Input Connector
VGA (Only VGA Model)
HDMI (Only HDMI Model)
DVI (Only DVI Model)
Input Video Signal
VGA signal (Only VGA Model)
HDMI signal (Only HDMI Model)
DVI signal (Only DVI Model)
Speakers 2W x 2(Only Audio-Input Model)(Typical)
Maximum Screen Size Horizontal:527mm
Vertical:296mm
Power Source 100-240V~, 50/60Hz
Environmental
Considerations
Operating Temp: 5° to 35°C
Storage Temp: -20° to 60°C
Operating Humidity: 10% to 85%
Dimensions 541.0(W) x 424.4(H) x 212.9 (D)mm
Weight (N. W.) 3.95kg Unit (net)
Mechanism spec Tilt: -5° to +20°
Detachable foot stand: Yes (by Release button)
External
Controls
Switch / Buttons
Power Button
Left(<) /Right(>)
MENU/ENTER
Auto/Exit
E(Empowering) Key
Functions
Acer eColor Management
Blue Light
Brightness
Contrast
Colour Temp
6-axis Hue
6-axis Saturate
Focus
Clock
H. Position
V. Position
Language
OSD Timeout
Wide Mode
DDC/CI
ACM
Input
OD
Auto Source
Quick start Mode
Reset
* All specications are subject to change without notice.
FindmanualsandotherdocumentsforyourAcerproductontheofcialAcersupportwebsite.
*Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per
year.