Acer RMTP-S1Q User manual

RMTP-S1Q
User guide
V1.0

Features
Projective capacitor touch pad technologies.
Compact & Slim design.
RF2.4G reliable wireless with up to 8-10meter performance(open
space—15meter).
Glittering backlighting LED performance.
Inside high sensitivity G-sensor.
Ultra low power consumption design.
Win7 compatible.
Rechargeable power design

DT touch pad
RF dongle
Appearance

Mode Key
Define Key Button
Menu Key
Switch Key
Music Function
Video Function
Play/Pause NextPrevious
Volume Down
Volume Up
Stop

DT indicator with dual tone(Blue/orange) LED design
TP mode: This key is keeping bright.
DT TP mode operation
Touch Pad
No gesture
1. Put 2 fingers on pad and slide up and down for performing
scrolling function.
2. Cursor should be right direction when the pad be placed in
NB.
Note

Function introduction
Mode 1:Mouse Mode
Mode 2:Mouse + MMB mode
Mode 3:MMB Mode

1.1 Will be mouse mode when power
on。
1.2 Touch Pad: Can touch the pad
twice for performing “double click”
function。
1.3 Mode key LED: Keep lighting.
1.4 Put 2 fingers on pad for
performing “Scrolling” function 。
1.5 DT on NB: The cursor operation
direction should be like left red
arrow.
1.6 DT stand along: G-sensor can
switch cursor as correct operation
direction.
Mode1:Mouse Mode
Touch Pad
1

1.Switch to MMB+TP mode
2. The red area should be cursor mode and
LED should be off.
3. The red area is still cursor function even
enable Video function. Clear fi will show
up.
The red area LED will be turn on
automatically if play the file which you
wanted。
4.Also can get back to MMB+TP mode
when place either video or music key, or
can enable MMB mode when push mode
key once.
Mode2:Mouse +
MMB(Video) Mode

Mode2:Mouse +
MMB(Music) Mode
2. 此時畫面左方紅色方框為 TP function 先不
啟動 MMB.
3. 若按下music 方啟動 Clear.fi music 操作畫
面, 此時左方紅色方框內仍是 TP function,直
到user 確認想要play的內容並 click 一下, 紅
色方框 內MMB 功能便會自動啟動。
4.使用者可選擇再按一下 music 再回到
MMB+TP mode or 按Mode key 啟動所有
MMB icon
1.Switch to MMB+TP mode
2. The red area should be cursor mode and
LED should be off.
3. The red area is still cursor function even
enable music function. Clear fi will
show up.
The red area LED will be turn on
automatically if play the file which you
wanted。
4.Also can get back to MMB+TP mode
when place either video or music key, or
can enable MMB mode when push mode
key once.

Mode2: Mouse +
MMB(photo) Mode
1.Switch to MMB+TP mode
2. The red area should be cursor mode and
LED should be off.
3. The red area is still cursor function even
enable photo function. Clear fi will
show up.
The red area LED will be turn on
automatically if play the file which you
wanted。
4.Also can get back to MMB+TP mode
when place either video or music key, or
can enable MMB mode when push mode
key once.

1. Mode key LED will be off when enable
MMB mode
2. Can touch switch key to rotate the
media key。
3. Can play with red area MMB function or
get back to TP+MMB mode if touch video
or music once .
Mode2:MMB Mode

Play/Pause Command。
Next Command。
Previous Command。
Stop Command。
Volume Up Command。
Volume Down Command。
Mode2:Clear.fi Mode

G-Sensor :Can perform to the right
operation direction 。( the tilt
angle should be over 30゜)
Mode2:Mouse Mode or
Mouse+MMB Mode

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
For Dongle (FCC ID: FCC ID: YSXRMTP-S1Q-01-D)
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID: YSXRMTP-S1Q-01-D ". If
the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on
the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.
