Acer CoPilot Pocket PC6 User manual

CoPilot Pocket PC6
satellite navigation
user guide

CoPilot Satellite Navigation Kit for Acer n300,
c510 or c530
Your CoPilot kit contains the following:
*Optional accessory
1 n300 car charger and converter varies between standard GPS and TMC models
+Not included with Acer c510 or c530
Note: All images are for illustration purposes and are subject to change.
CCooPPiilloottSSaatteelllliitteeNNaavviiggaattiioonnKKiitt
c
o
p
y
r
i
g
h
t
©
2
0
0
6
.
A
L
K
T
e
c
h
n
o
l
o
g
i
e
s
L
t
d
.
A
l
l
r
i
g
h
t
s
r
e
s
e
r
v
e
d
.
Data Disc 2
Maps of Europe
www.alk.eu.com
c
o
p
y
r
i
g
h
t
©
2
0
0
6
.
A
L
K
T
e
c
h
n
o
l
o
g
i
e
s
L
t
d
.
A
l
l
r
i
g
h
t
s
r
e
s
e
r
v
e
d
.
Data Disc 1
Maps of Europe
www.alk.eu.com
Install Disc - Europe
c
o
p
y
r
i
g
h
t
©
2
0
0
6
.
A
L
K
T
e
c
h
n
o
l
o
g
i
e
s
L
t
d
.
A
ll
r
i
g
h
t
s
r
e
s
e
r
v
e
d
.
E
U
_
M
a
j
o
r
_
I
n
s
t
a
l
l
_
D
i
s
c
www.alk.eu.com
iiCoPilot Pocket PC 6
CoPilot Satellite Navigation Kit
Acer n300, c510 and c530 Edition
SD storage card
pre-loaded with
single region or
pan-european maps
1 x installation CD
(single region or
pan-european)
Bluetooth
receiver+
n300 car charger1and
n300 car mount kit
FM9 cable*
2 x data CDs
c500 series car charger and
c500 series car mount kit

Satellite
navigation
system for
your Acer
PDA
CCCoonntteennttss
Getting started 1
User Interface and Keys 2
GPS set-up 3
CoPilot menus 5
Navigating to a destination 6
Entering an Address 7
Entering a Home Address 8
Entering a Work Address 8
Entering a Favourite Destination 9
Entering a Recent Destination 10
Entering a Contact 11
Navigating to a Point Of Interest 12
Safety camera alerts 13
Navigating to a Postcode 14
Pick on Map 15
Navigating to an Intersection 16
Latitude/longitude 17
Saved Trip 18
Trip editing and waypoints 19
Optimising and re-arranging stops 20
Detour feature 21
Selective routing 22
Contents
iiii
CoPilot Pocket PC 6Acer n300, c510 and c530 Edition

iiiiiiCoPilot Pocket PC 6
TMC traffic service 23
Driving views 25
Driver safety 25
Where am I? 26
Itinerary 26
Next Turn 26
Destination 26
3D 26
Night time map displays 27
Customise your map displays 27
Navigation modes 28
Guidance, Planning and Walking 28
Routing settings 29
Guidance settings 31
Map settings 33
POI alert settings 34
Language and speech settings 35
Favourite settings 36
Recent stop settings 37
Options menu 38
CoPilot desktop software and support 39
Installing CoPilot desktop software 40
Data Download Wizard 41
Contents
Acer n300, c510 and c530 Edition

GGeettttiinnggSSttaarrtteedd
Getting Started
11
CoPilot Pocket PC 6
Setting up your Acer n300, c510 or c530
Set up your Acer PDA following the instructions as described
in the PDA's manual.
Please ensure your Acer PDA’s battery is fully charged.
Set the correct date and time on your Acer PDA for optimum
performance.
Installing CoPilot on your Acer n300, c510 or c530
CoPilot software and maps is pre-loaded on the CoPilot storage
card.
Simply insert the card into the SD card slot of the Acer PDA.
Installation will begin automatically.
Follow the on-screen steps:
Safety and license agreement: Select ‘I accept’
GPS technology information: Select ‘OK’
Installation of the CoPilot Pocket PC application will
commence. Select ‘Device’ as the location to install the
CoPilot Pocket PC application. Press ‘Install’.
Note: If set-up does not automatically run after inserting the card,
select WindowsStart > Programs> File Explorer then browse to
the storage card and select the “2577” folder and press ‘Autorun’.
Acer n300, c510 and c530 Edition

22CoPilot Pocket PC 6 Acer n300, c510 and c530 Edition
UUsseerrIInntteerrffaacceeaannddKKeeyyss
User Interface andKeys
6
5
4
3
2
1
CCooPPiilloottuusseerr
iinntteerrffaaccee
Next turn arrow
Route ahead highlighted
Driver’s current position
Distance to next turn
CoPilot Menu button
GPS status indicator
AAcceerrnn330000//cc550000
sseerriieesskkeeyyss
Power button
Today button
Calendar button
Messaging button
Contacts button
5-way joystick
SD memory card slot
5
4
3
2
1
Acer n300 series Acer c500 series
E
D
C
B
A
1
2
3
4
5
6
F
G
6
A
B
C
D
E
F
G
G
F
EC
B
A
D

CoPilot uses Global Positioning Satellites (GPS) to locate your
position on a map and to provide turn-by-turn guidance to a
destination.
Instructions for Acer n300
It is essential that you connect a Holux GPS-236 Bluetooth
receiver with your Acer n300 to obtain a GPS fix so you can
enjoy satellite navigation on your device
Press the grey Bluetooth symbol in the bottom right corner
of the Windows Start screen and select ‘Turn Bluetooth
ON’ from the pop-up menu. The Bluetooth symbol will
turn blue to indicate that it is switched on
If you have the optional GNS FM9 TMC cable, attach it
now. Otherwise, proceed to the next step
Switch on your Holux GPS-236 Bluetooth receiver
Launch CoPilot by selecting Windows Start > Programs and
then select the ‘CoPilot’ icon
After several seconds delay, you will be asked in a pop-up
screen to select your Bluetooth device. Select ‘Holux
GPSlim236’.
Note: Please see instructions below for Acer n300. Please
refer to page 4 for instructions on setting up Acer c510 and
c530 devices.
GGPPSSSSeett--uupp
GPS Set-up
33
CoPilot Pocket PC 6Acer n300, c510 and c530 Edition

44CoPilot Pocket PC 6
GPS Set-up
Instructions for Acer c510 and c530
The Acer c510 and c530 have an integrated GPS receiver
which allows you to obtain a GPS fix so you can enjoy
satellite navigation on your device.
Launch CoPilot by selecting Windows Start > Programs and
then select the ‘CoPilot’ icon
If you have the optional GNS FM9 TMC cable, attach it
now.
Connecting a GNS FM9 TMC cable (by model)
If you have the optional GNS FM9 TMC cable you can receive
real-time traffic information via TMC.
The GNS FM9 TMC cable attaches to the n300/c510/c530 car
charger which connects to your Acer PDA.
CoPilot will search for TMC channels and report traffic
information.
Acer n300, c510 and c530 Edition

CCooPPiilloottMMeennuuss
CoPilot Menus
55
CoPilot Pocket PC 6
Take a look at the CoPilot Home Screen
The ‘Home’ screen is displayed when you first launch CoPilot,
or it can be accessed by selecting Menu > Options> Home.
Home screen menu options are:
Going To to enter a destination and receive guidance
Start Demo to view a CoPilot demonstration to see CoPilot
navigate to a pre-defined location
Help topics about basics such as entering a destination and
GPS setup
Settingsto customise advanced Routing options, change
Guidance, Map and Language options. Plus, additional
settings to enable/disable Points of Interest (POIs) and
safety camera alerts
GPS for setting up an integrated/Bluetooth receiver.
CoPilot Menu Button
Press the ‘Menu’ button to access the following sub-menus:
View allows you to change between a choice of 6 driving views
Trip enables you to enter a new destination, edit an existing
destination, add additional destinations and access saved
trips.
Modeis used to set CoPilot for Guidance, Walking or
Planning purposes
Trafficincidents along your planned route are reported
into CoPilot using a TMC data feed (optional)
Optionsto run the CoPilot demonstration, use the CoPilot
Help and Tutorial functions, and read CoPilot license
information
Quit CoPilot to close and exit the program.
S
Acer n300, c510 and c530 Edition

Select ‘Going To’ from the ‘Home’ screen. In the ‘Going To’
screen, please press the ‘New Trip’ button.
The ‘Select Stop’ screen will be displayed and provides you
with several different ways to enter a destination (described
on the following pages in more detail):
The destination(s) entered for your journey will be displayed
in the ‘Going To’ screen.
You can enter multiple destinations and optimise your journey
by selecting a destination in the ‘Going To’ screen and pressing
‘Optimise Stops’ from the pop-up menu.
Once you have finished entering your stops, select ‘Start Driving’.
NNaavviiggaattiinnggttooaaDDeessttiinnaattiioonn
66CoPilot Pocket PC 6
Navigating to a destination
Enter an Address
Your Home or
Work address
Favourites
Recent places
An Outlook Contact
A Point of Interest
A UK Postcode
Pick a point
on a map
Intersection/cross roads
A Latitude/Longitude
Enter a previously
SavedTrip
Acer n300, c510 and c530 Edition

Entering an Address
From the ‘Select Stop’ screen. Press the ‘Address’ button.
Using the keyboard, type in the Country, City/ Postcode,
House Number and Street Name details of the destination in
the appropriate screens.
CoPilot may display a list of address matches. If an exact match
is not found, a cross street, nearby address or a street in a
nearby city will be displayed.
Please select one of these and press ‘Next’ to continue.
You will be offered the opportunity to create a name for your
destination, either type in a name or press ‘Finish’.
The destination entered for your journey will be displayed in
the ‘Going To’ screen. You can check the destination on a
map to ensure that it is the correct location by selecting the
destination and pressing ‘Map’ from the pop-up menu. If you
are confident that this is the correct location, press ‘Close’ to
return back to the ‘Going To’ screen.
At this point, you can press ‘Add Stop’ to enter additional
destinations, delete the destination entered, or press ‘Start
Driving’ to begin receiving navigation guidance.
To return to the ‘Going To’ screen to edit your trip at anytime,
select Menu > Trip > Edit.
Navigating to a destination
77
CoPilot Pocket PC 6Acer n300, c510 and c530 Edition

Entering a Home Address
In the ‘Select Stop’ screen, press the ‘Home’ button.
The first time you use this button, you will be prompted to
enter your home address to pre-programme this button.
Enter your home address the same way you enter a new
address (described on pg. 7).
The next time you use the ‘Home’ button to obtain guidance
to/from home to a destination, simply press the ‘Home’
button from the ‘Select Stop’ to enter it as a destination. This
will display your home address in the ‘Going To’ screen, then
press ‘Start Driving’.
Entering a Work Address
In the ‘Select Stop’ screen, press the ‘Work’ button.
The first time you use this button, you will be prompted to
enter your work address.
Enter your work address the same way you enter a new
address (described on pg. 7).
The next time you press Work, your work address will be
entered as a destination in the ‘Going To’ screen, then press
‘Start Driving’.
88CoPilot Pocket PC 6
Navigating to a destination
Acer n300, c510 and c530 Edition

Entering a Favourite Destination
In the ‘Select Stop’ screen, press the ‘Favourite’ button.
A scrollable list will appear, providing you with quick and easy
access to your top 50 destinations.
Select a Favourite from the list to enter it as a destination and
press ‘Start Driving’.
How to create a Favourite
To add a destination to your Favourites list enter an address,
in the same way you enter a new address (described on pg. 7).
In the ‘Name this location’ screen, select the ‘Add thislocation
to Favourites’tick box to add the destination to your
Favourites list.
Alternatively, when the destination is displayed in the ‘Going
To’ screen, please select the destination and select ‘Add to
Favourites’ from the pop-up menu.
You can also save your current location as a Favourite. Simply
press Menu > Trip > Save Location.
Note: You must be in Guidance mode and be receiving GPS
data to save your current location as a Favourite.
Managing Your Favouriteslist
To delete a Favourite destination select Home > Settings >
Favourites then select the destination and press ‘Delete’.
To edit a Favourite, press ‘Edit’ and re-enter the Country,
City/Postcode, Street Name and Number of the destination.
Navigating to a destination
99
CoPilot Pocket PC 6Acer n300, c510 and c530 Edition

Entering a Recent Destination
In the ‘Select Stop’ screen, press the ‘Recent’ button.
A scrollable list will appear, providing you with quick
and easy access to the last 50 destinations that you entered.
Note: When your Recent list is filled (50), each new address
will replace an address that has been inactive for the longest
period of time.
Select a Recent destination from the list to enter it as a
destination and press ‘Start Driving’.
Managing Your Recent destinationslist
To delete a Recent destination select Home > Settings >
Recent Stops then select the destination and press ‘Delete’.
To add one of your recent destinations to your Favourites
list select Home > Settings > Recent Stops then select the
destination and press ‘Add to Favourites’.
1100CoPilot Pocket PC 6
Navigating to a destination
Acer n300, c510 and c530 Edition

Entering a Contact
Navigate to a Contact listed in your Acer's Outlook Contacts
address book.
Tip: use the synchronisation cable provided with your PDA to
copy your Microsoft Outlook Contacts from your PC to your
Acer device.
Press the ‘Contact’ button in the ‘Select Stop‘ screen.
Type the first letter of your Contact’s name. A list of
Contacts starting with that letter will appear. Select the
Contact’s name and press ‘Next’. Assign the Contact to either
the Business, Home or Other Category and then press ‘Next’.
If necessary, CoPilot will prompt you to correct any part of the
address it does not recognise.
The Contact address will be displayed as a destination in the
‘Going To’ screen. Select ‘Start Driving’.
Navigating to a destination
1111
CoPilot Pocket PC 6Acer n300, c510 and c530 Edition

Navigating to a Point of Interest
Points of Interest (POIs) are important, useful and popular
locations. You can use CoPilot to locate and navigate to any
one of thousands of Points of Interest.
POIs are listed by category and type to assist your search.
To search for a POI, select a ‘Category’ and ‘Type’ and enter a
name (optional). Press ‘Next’.
You can search for a POI ‘along current route’ or ‘near current
location’ if you have a GPS signal.
Alternatively, you can type in a city and search for a POI near
that city. Press ‘Next’.
Enter a Country and a City/Postcode. Press ‘Next’.
CoPilot will search for POIs based on your search criteria.
A list of POI matches will be displayed. Select the desired POI
from the list.
1122CoPilot Pocket PC 6
Navigating to a destination
Acer n300, c510 and c530 Edition

In this screen you have several choices, you can press:
‘Map’ to preview the location of the selected POI on a
map. In the map screen, press the +/- buttons to zoom in
and out of the view. Press ‘Close’ to return to the POI
matches screen.
‘Expand’ to run another search within a larger search area.
‘Finish’ to enter it as a destination and select ‘Start driving’.
POI Alerts
To report and view POIs (by desired category) for any journey
on a map while driving, select Home > Settings > POI Alerts.
Select the ‘Enable’ tick box then define the ‘Category’ of POIs
to be reported along your route, by selecting each desired
category tick box.
In the Home > Settings > Map screen, select set ‘Show POIs’ as
either ‘Always' or ‘When Stopped’.
Safety Camera alerts
CoPilot can warn you as you approach a safety camera location
while driving, by displaying a yellow safety camera indicator
in CoPilot’s maps.
As you approach a safety camera location, your current speed,
the road’s speed limit and the distance to the safety camera
will be displayed.
To alert for safety cameras, press Home > Settings > Safety
alerts and select the ‘Enable’ tick box. Press ‘OK’.
Navigating to a destination
1133
CoPilot Pocket PC 6Acer n300, c510 and c530 Edition

Navigating to a 7 digit UK Postcode
In the ‘Select Stop’ screen, press the Postcode button.
Use the keyboard to enter a full UK postcode. Press ‘Next’.
Enter the House Number and Street Name or simply select
‘Postcode Center’. Press ‘Next’.
You will be offered the opportunity to create a name for your
destination, either type in a name or leave this field blank.
Select the ‘Add thislocation to Favourites’tick box if you
would like to add the destination to your Favourites list.
Press ‘Finish’. The address will be added as a destination. Select
‘Start Driving’.
1144CoPilot Pocket PC 6
Navigating to a destination
Acer n300, c510 and c530 Edition

Pick on Map
In the Select Stop screen, press the ‘Pick on Map’ button.
Zoom the map to a starting area by entering an Address,
Favourite, Contact or POI, then select a location on the map.
To help you find your desired location you can pan around
the map by tapping the map screen and moving it with your
stylus. Additionally, press the +/- buttons to zoom in and out of
the preview.
You can enter a destination by selecting a point on a map and
pressing ‘Add as Stop’.
Enter a name for the location if required, or leave this field
blank. Press ‘Apply’. The location will be entered as a destina-
tion. Press ‘Start Driving’.
Navigating to a destination
1155
CoPilot Pocket PC 6Acer n300, c510 and c530 Edition

Navigating to an Intersection
To enter the intersection of two roads, press the ‘Intersection’
button in the Select Stop screen.
Use the keyboard, to enter the Country. In the following screen
type in the City/Postcode. Enter the name of the “First
Street”. Press ‘Next’.
Enter or select from the list the name of the “Second Street”
which intersects the “First Street”. Press ‘Next’.
You will be offered the opportunity to create a name for your
destination, either type in a name or leave this field blank.
Select the ‘Add thislocation to Favourites’tick box if you
would like to add the destination to your Favourites list.
Press ‘Finish’. The address will be added as a destination. Select
‘Start Driving’.
1166CoPilot Pocket PC 6
Navigating to a destination
Acer n300, c510 and c530 Edition