ACME CA-ZTS2416+632 User manual

3A
The 1/2/3/4/5/6 on the A group switches the L 2/4/6/8/10/12 output on the 16A
socket on the A group
B/C/D switch control mode is the same as A group switch.
The 1/2/3/4/5/6 on the E group switches the 1/2/3/4/5/6 output on the 32A socket on
the E group
CA-ZTS2416+632
User Manual
Please read the user manual before use
2015.06.09
毅丰
受控正本

1A
1. Safety Instructions
To ensure that the power input and output of the power line can carry 225A current.
Please keep this User Manual for future consultation. If you sell the fixture to another
user, be sure that they also receive this instruction booklet.
Please unpack and check carefully there is no transportation damage before using the
fixture.
Please disconnect main power before servicing and maintenance.
The housing must be replaced if they are visibly damaged.
There are no user serviceable parts inside the fixture. Do not open the housing or
attempt any repairs by yourself. In the unlikely event your fixture may require service,
please contact your nearest dealer.
2. Technical Specifications
Input: 3phase Y-tape ( AC380V20V 500Hz + Earth ). Max current is 3phase 225A
Output: 4pcs 19pin Socket ( 24 way AC220V 16A) and 12ways AC220V 16A Industrial
socket
Size: 830x600x985mm
Weight:79 KGS
2
A
3. Front/Rear view
1Ammeter：Display ABC three-phase current 2 Voltmeter：Display voltage
3 Voltage selective twisting：Display (A/B/C) voltage 4 Light
5 225A total switch 6 A/B/C Three phase indicator
7 Each output control switch 8 19pin Socket
9 32A Industrial socket 10 Power input
225A total switch controls the power output of the whole machine.