Acnodes PMW6230 User manual

Industrial Monitors
User Manual
23" 1920 x 1080 Full HD LCD Monitor
VGA + DVI-D Video Input
Open Frame Metal Construction
PMW6230
All rights reserved. Product description and product specifications are subject to change without notice.
For latest product information, please visit Acnodes’ website at www.acnodes.com.
14628 Central Ave. Chino, CA 91710 Tel: [phone]
Fax: [phone]
© Copyright 2021 Acnodes Corp.

Legal Information
First English printing, October 2020
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Contents
< Part. 1 > PMW6230
1.1 P.1
1.2 P.2
1.3
Package Content
Structure Diagram & Dimension
Installation P.4
< Part. 2 > Specifications / OSD
2.1 P.5
2.2 P.7
Product Specifications
On-screen Display Operation (OSD)
< Part. 3 > Options
Option Table
3G / HD / SD-SDI Broadcast-grade input
MCS Multi-display control solution
Upgrade : HDMI, DP & Audio
Touchscreen & Driver
DC Power : 12V / 24V / 48V / 125V
Quad Display for CCTV
3.1 P.9
3.2 P.10
3.3 P.11
3.4 P.12
3.5 P.14
3.6 P.16
3.7 P.17

■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip offthe finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood
based paper product such as paper towels can scratch your LCD screen.
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
Cleaning Your Monitor

P. 1
< Part 1> PMW6230
< 1.1 > Package Content
23” FHD LCD display X 1
6ft VGA cable X 1
Power adapter X 1
Power cord X 1
PMW6230
Basic I/O
Upgrade I/O with advanced features
DVI-DPower VGA
Power VGA BNC
HDMIDP
Audio
inOut

P.2
< 1.2 > Structure Diagram
1
2
Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H) Net Weight Gross Weight
PMW6230 581.4 x 65.3 x 360.6 mm
22.9 x 2.6 x 14.2 inch
659 x 117 x 640 mm
25.9 x 4.6 x 25.2 inch
6.7 kg
14.7 lb
10.4 kg
22.9 lb
Rear case
LCD panel
Audio speaker, pair
Universal open frame mounting
LCD membrane
Extended remote sensor membrane cable
( 66cm from AD board to sensor end )
1
2
3
4
5
6
6
5
4
Front View
Rear View
Side View
Bottom View
3

P.3
Side View
UNIT : mm
1mm = 0.03937 inch
< 1.2 > Dimension
Front View
Rear View
Bottom View

P.4
M4 screw
< 1.3 > Installation
( I) Universal mount
( II ) VESA mount ( 100*100mm )
Hardware and M4*4 pcs for VESA mounting are not
provided

P.5
< Part 2>
< 2.1 > Product Specifications
Mechanical Design
Protection open frame
Front Panel -
Rear Casing Black, RAL 9005
VESA mount 100 x 100 mm
Universal mount ready
Desktop stnad -
Panel mount -
LCD Panel
Panel Size ( diagonal ) 23-inch Widescreen TFT color LCD
Native resolution 1920 x 1080
Brightness ( cd/m2) 310
Contrast Ratio ( typ. ) 1000 : 1
Colors 1.07 Billion, 10-bit
Viewing Angle ( L/R/U/D ) 89/89/89/89
Response Time ( ms ) 25
Dot pitch ( mm ) 0.13725
Display Area ( mm ) 527.04H x 296.46V
Surface treatment Anti-glare
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 30,000
Power
Input Auto-sensing 100 to 240VAC, 50 / 60Hz
Consumption:
Screen ON Max. 45W
Power saving mode Max. 9W
Power button OFF Max. 2W
Compliance
EMC FCC & CE certified
Safety CE / LVD certified
Environment RoHS2 & REACH compliant
Video
VGA Analog 0.7Vp-p
DVI DVI-D single link
Option
HDMI HDMI 1.4 / HDCP 1.4
Display port DP 1.0 / HDCP 1.3
Composite ( BNC ) NTSC & PAL
Audio Option
Input
Connector
Impedance / Power level
3.5mm stereo jack
30kΩ/ 750mV
Output
Connector
Resistance / Power level
3.5mm stereo jack
30kΩ/ 2.8V
Speaker:
Dual Stereo 2W x 2
*When the audio output is connected, speaker output is OFF

P.6
Physical Specification
Product ( W x D x H )
mm 581.4 x 65.3 x 360.6
inch 22.9 x 2.6 x 14.2
Packing ( W x D x H )
mm 659 x 117 x 640
inch 25.9 x 4.6 x 25.2
Net Weight 6.7 kg / 14.7 lb
Gross Weight 10.4 kg / 22.9 lb
Chassis color Dark
Chassis materials Aluminum
* All dimensions stated are subject to change if options are selected / integrated to base model part codes
Applicable Format
DVI-D / VGA Input PC Signal 1920 x 1080 x 60Hz
1400 x 1050 x 60Hz
1440 x 900 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
Audio Signal 2ch Linear PCM
HDMI Input PC Signal Same as VGA
HDMI 1.4 1920 x 1080 x 50 / 60Hz ( 1080p )
1920 x 1080 x 25 / 30Hz ( 1080i )
1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal 2ch Linear PCM
Display port Input PC Signal 1920 x 1080 x 60Hz
1600 x 1200 x 60Hz
1360 x 768 x 60Hz
1280 x 768 x 60 / 75Hz
1280 x 768 x 60Hz
1024 x 768 x 60 / 70 / 75Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
Audio Signal 2ch Linear PCM
* In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio signals, the LCD may display
incorrectly on a full screen. If so, please adjust the display card setting on display size to fix the issue.
Environmental Conditions
Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage /
Non-operating
Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration ( 11ms duration )
Vibration 10~300Hz 0.5G RMS random vibration
< 2.1 > Product Specifications

P.7
< 2.2 > On-screen Display Operation ( OSD )
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / offLCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
Picture
Brightness : Adjust the screen brightness
Contrast : Adjust the difference between the image background
( black level ) and the foreground ( white level )
Black level : Adjust background black level of the screen
Eco : Screen in power saving mode
1
Position
H-Position : To adjust the horizontal position of the video
V-Position : To adjust the vertical position of the video
Clock : To auto adjust H. Size of the screen
Phase : To fine tune the screen.
Picture size : FULL SCREEEN / 4:3 / 5:4 / 16:10
2

P.8
Color
Color temperature : User / Warm / Cool / 5400k mode and
Red / Green / Blue color balance
Sharpness : Adjust the image from weak to sharp
Hue : Adjust the screen hue value
Saturation : Adjust the saturation of the image color
Dynamic
luminous control : Control the dynamic brightness
3
OSD Set
Language : Select the language in which the OSD menu is
displayed - English
OSD H-Position : Align the screen image left or right
OSD V-Position : Align the screen image up or down
OSD time out : Adjust the screen timeout
OSD transparency : Adjust the screen transparency
OSD rotation : Rotate the screen - 90° / 180° / 270°
4
5
6
Reset
Reset : Return the adjustment back to factory setting
MISC
Signal source : Select the signal source - DP / HDMI1 / HDMI2
Mute : Turn offthe surrounding sound
Audio in : Auto / Line in / DP
Volume : Adjust the volume of sound
Sleep mode : Set the offtime - 10 min / 20 min / 30 min /
50 min / 60 min / 120 min / 240 min

P.9
*** About SDI
The AD board comes standard with HDMI, VGA, BNC, audio inputs and RC-2 remote controller.
Options
SDI *** ✓
Composite ( BNC ) ✓
Audio ✓
Touchscreen ✓
MCS multi-display control ✓
DC Power ✓
MIL-type / lockable connector ✓
Quad display ✓
< Part 3> Options
< 3.1 > Option Table

P.10
*** For SDI option, the AD board comes standard with HDMI, VGA, BNC, audio inputs and RC-2 remote
controller ( please refer to P.13 )
< 3.2 > Options : 3G / HD / SD-SDI input
Acnodes SDI input is an ideal solution for the broadcast-grade
video and high resolution CCTV market.
Designed for use with LCD displays, a SDI input module can
support up to 1080p @60Hz resolution without using additional
space or power and it comes standard with a 2-year warranty.
INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio SMPTE 299M / 272M-C
Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized / Asyn-
chronized Video
Compatible Video Format 3G-SDI 1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI 1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s
Audio
Power
out in
PC
VGA
HDMI
SDI
out - in

P.11
For the 1st and last display,
push the set switch upward
Set switch
For other daisy chain displays,
push the set switch downward
LINK OUT IN OUT
RS-232C
Cat5 / 6 cable
max. 300 meters
up to 64 displays
Daisy chain up to 1,000
meters and 64 displays
RJ-45 jack
IN OUT IN OUT
Cat5 / 6 cable
max. 300 meters
Cat5 / 6 cable
max. 300 meters
15 feet serial cable
( over 15 feet, extender required )
More control is always good. Especially when it is necessary
and easy. Acnodes provides MCS solution to control the OSD of
various LCD display up to 64 units.
The RS-232C is used for the communication between the PC
and the first display via a 15 feet serial cable while the CAN bus
is used for the various LCD displays cascade together via CAT
5/6 cable, and daisy chain up to 1,000 meters.
Designed for use with LCD displays, Acnodes provides a
MCS input module without using additional space or power and
it comes standard with a 2-year warranty.
< 3.3 > Options : MCS
MCS
( Multi-display Control )
Audio
Power
out in
PC
VGA
HDMI
Link
MCS
inoutset

P.12
< 3.4 > Upgrade Options :
( 1 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio
signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card
setting on display size to fix the issue.
( 2 ) Upgrade option comes with RC-2 remote controller x 2 ( please refer to P.22 )
***
- HMDI ( HDMI 1.4, CEA-861-E )
- Display Port ( DP 1.0, HCDP 1.3 )
- Audio ( Built-in Dual Stereo Speakers, 2W x 2 )
( 3.5mm audio jacks for audio in & out )
Power VGA BNC
HDMIDP
Audio
inOut

P.13
How to Use RC-2 Remote Controller
123
456
AUTO 0-/--
78 9
PIP
MENU SELECT
BACK EXIT
SOURCE POSITION
SWAP PIP
AUDIO
ASPECT
SLEEP
PIP
ENTER
CH
FREEZE
MUTEINPUT
VOL
W
a
t
e
r
p
r
o
o
f
1
4
3
2
5
7
6
20
21
8
9
10
8
11
12
1
12
13
15
16
17
18
1
19
14
14
INPUT Select the source
Switches on or offthe TV
0 - 9 Only use in TV mode. Select channels. For channel numbers 10 and
above, enter the second digit within two seconds.
AUTO Auto adjust
MENU Display the menu on the screen or go to the previous menu
▲/ ▼/ ◄/ ►/ ENTER
Go to the upper menu or select the previous value /
Go to the next menu or select the next value /
Decrease the setting value /
Increase the setting value or enter to the select item setting
Enter to the select item settings or excude the setting
BACK Back to previous value
MUTE Turn on or offthe speaker
Vol + / - Increase or decrease the speaker volume
CH + / - For TV model only, increase or decrease the channel number
FREEZE Reserve for OEM model
- / -- For setting input single or double digits
ASPECT Adjust the screen size
SELECT To select the existing item
SLEEP Select the sleeping time
EXIT Exit the menu or cancel
PIP functions
PIP Picture in picture
PIP AUDIO To set the audio of in PIP mode
POSITION To set the screen position in PIP mode
SOURCE PIP Source
SWAP Swap screen in PIP mode
1
8
2
3
4
5
6
7
9
10
11
12
13
14
15
16
17
18
19
20
21

P.14
■Dimension will be changed if touchscreen required
■USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■For detailed information, please refer to the attached CD disc
■As the touchscreen unit is not made of toughened glass, please handle it carefully
< 3.5 > Options : Touchscreen & Driver
23" USB Touchscreen Specification
Power VGADVI-D
USB Touchscreen
Model TPC-10 Multi-touch TRB e-Resistive IR-06 Infrared
Technology Projected Capacitive 5-Wire Resistive Infrared
Touch Point 10 Single 6
Input Type Finger or Capacitive Stylus Finger or Stylus Pen, Finger, Finger of
gloved hand activation
Resolution 4096 x 4096 2048 x 2048 -
Touch Point Accuracy ± 2 mm - ± 2 mm
Response Speed < 5 ms 15 ms ≤8ms
Activation Force < 5 g ≤50 g No minimum touch
activation force
Surface Hardness 6H 3H -
Light Transmission > 85% 80% ± 3% -
Haze 3% ↓8% ± 3% -
Durability 50 million touches 10 million touches Unlimited
Top Layer 3 mm Glass ITO Film Glass
Bottom Layer 0.7 mm Sensor Glass ITO Glass
Thickness 3.9 ± 0.1 mm 2.2 ± 0.2 mm 2 mm
Connector USB USB Type A USB Type A
Compatibility Linux / Android / Windows / Mac Windows 7 / XP /
Vista, Linux
Windows 7 / Windows
10

P.15
TRB / TCB Driver
Please follow the below steps to setup the touch screen:-
Step 1. Run the bundled CD disc
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to finishthesetup
Step 4. After installation, run the TouchKit program & the “4 point calibration”
Please do the initial calibration
after the first setup
Connect the USB cable from the USB port on the LCD to a computer. The touch screen supports
easy Plug-and-Play operations. There is no need to install additional drivers on the computer.
< 3.5 > Options : Touchscreen & Driver
TPC-10 Driver

P.16
Model 12V 24V 48V 125V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt 110-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160V
Input current
- No load 50 mA 50 mA 50 mA 35 mA
- Full load 4950 mA 2450 mA 1220 mA 749 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A 6.25A
Efficiency 84% 85% 85% 91%
< 3.6 > Options : DC Power
( 1 ) If the unit with LCD, earthing may be required
For DC power option :
***