Acoustic Audio AA2171 User manual

Note: Please avoid leaving magnetic objects near the system
1. Insert both satellite speaker cables into their respective output
sockets located at the rear of the sub-woofer. (FL : Front Left
Speaker, FR : Front Right Speaker)
2. For dimensional sound, insert audio cable into respective AUX
socket and connect to laptop, game console or mobile device.
3. Once you’ve connected the system in your preferred method,
insert the power plug into ~120V wall outlet and switch power to
ON.
System Connections
PAGE 5
PAGE 6
Positioning the Speakers
*Sub-woofer can go anywhere on the oor of the room
(there is no directional requirement for bass eect)
*FL and FR speakers should be in front of the listener facing
inward toward the center
1.) AUX Input
2.) FL/FR Output
3.) AC Power Cord
4.) Power ON/OFF
Rear Panel PAGE 4
Features:
- 2.1 channel multimedia speaker for computer
or home system
- Built In Bluetooth Receiver
- Full audio spectrum performances, ideal for
your favorite entertainment such as MP3,
MP4, CD/DVD movies and digital playbacks
- Specially designed woofer cabinet for bass
and resolution
- Comes with remote control and RCA stereo
connection cable
Specications:
- Power Audio : 350 Watts Total System Power
- Drive Units: 3” x 2 full range magnetically shielded
satellite speakers and powered sub-woofer
- Frequency Response: 20 - 20,000 Hz
- Power Supply: 120V
-Dimensions (W x H x D):
Sub-woofer - 6.7in x 12.3in x 13.2in
Satellites - 4.1in x 6.7in x 4.4in
Package Contents:
- (1) Sub-woofer Cabinet
- (2) Satellite Speakers
- (1) Remote Control
- (1) User Manual
- (1) RCA Cable
- (1) 3.5mm RCA Cable
PAGE 1
PAGE 3
Using The Remote Control
Note: if remote loses function, please replace the 2 AA batteries.
Front Panel PAGE 2
2.1 CH MULTIMEDIA SPEAKER SYSTEM
Thank you for buying this Acoustic Audio System. Prior
to rst use, please read the manual carefully. If you ever
have questions on your system, please contact your
authorized dealer and their highly experienced sta will
be more than willing to help.
PLEASE NOTE: TO PROPERLY CONNECT MP3, PC ,GAME CONSOLE
ETC,YOU MUST USE THE ENCLOSED 3.5MM TO RCA CABLE.
AA2171
1. ST-BY/PLAY/PAUSE : Press to turn on speaker,long press into stand-by.
PLAY/PAUSE on the USB/SD/BT mode.
2. SOURCE : Change the input mode.
3. NEXT : In USB/SD/BT mode, press“ NEXT ”play next song.
4. PREVIOUS : In USB/SD/BT mode, press“ PREVIOUS ”play previous song.
5. - VOLUME + : Volume up/down.
(1)
(2)
(3)
(4)
(5)
VOL+
RESET
BASS+ BASS-
TRE+
TRE-
VOL-
SOURCE
(1)
(2)
(5)
(3)
(4)
(6)
(8)
(7)
(9)
(10)
(11)
(12)
(14)
(13)
1. ST-BY : Turn on/Stand-by the speaker.
2. SOURCE : Select the source- AUX/DVD
/USB/SD/FM/BT.
4. TREBLE- : Adjust the treble volume by
pressing TREBLE+/- from +6dB to-6dB.
5. VOL+ : Volume up.
7. VOL- : Volume down.
8. 0~9 : Numeric keys, with the help of
these keys you select song or track in
USB, and in FM, you can key in station
frequency, i.e. for 927 key in 92.7.
9. MUTE: Press“MUTE” to activate or
deactivate mute.
6. PREVIOUS: Play the previous song by
pressing “ ”at USB/SD/BT input mode.
3. BASS+ : To decrease the BASS by
pressing.
11. BASS-: To Increase the BASS by pressing.
10. RESET: can reset volume.
12. TREBLE+ : Adjust the treble volume by pressing TREBLE+/- from -6dB to+6dB.
13. PLAY/PAUSE : Plays/pauses songs alternately. In BT mode, press “ ” for 3
seconds to force disconnect the BT.
14. NEXT : Play the next song by pressing“ ”at USB/SD/BT input mode.
1. ST-BY
2. SOURCE
3. BASS+
4. TUNING-
5. VOL+
6. PREVIOUS
7. VOL-
8. 0~9
9. MUTE
10. RESET
11. BASS-
12.TUNING+
13. PLAY/PAUSE
14. NEXT
(1)
(2)
(3)
(4)

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC's RF exposure guidelines, this equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body.