Acoustic Box XY-S User manual

1
Assembly Instructions
Small (XY-S) and Medium (XY-M)
(Parts List and Assembly on page 4)
NOTE: (Med unit XY-M only)
$WLPEHUGRZHOLVconnected to front panel (004) to
stabilise panel during assembly. Detach doZHOGLVFDUG
AFTER completing step 3.
1. Locate slots on bottom of Side (002) and Rear
(003) Panels and push down into Corner Bracket
(007).
2. Insert Plastic Cap (012) into holes in top of
Panels to join them. Tap into place with a mallet.
3. Repeat steps 1 and 2 for all panels.
1
2
3

2
4. Push Door Handles (014) into Removable Front
Door (005) until a ‘click’ is heard.
5. Insert Removable Front Door (005) into
Front Panel (004). Locate studs on sides of
Removable Front Panel then push slightly in
and down.
4
9
9.1
6
5
8
7
10

3
6. Insert Door Latches (010) through holes in Top Door
(006).
7. Connect Lock Brackets (013) to Front Panel (004) by
inserting them sideways into holes. Twist into upright
position and screw into place.
8. Attach Top Door (006) to unit with Hinge Pins (008).
Tap into place with a mallet.
9. Insert Door Stays (009) into Side Panels.
9.1 To hold Top Door open, swivel Door Stays into position OR
remove Door Stays from Side Panels, position them rmly
into Top Lid corners underneath anges and re-insert back
into Side Panels.
10. Insert Top Corner Brackets (056 and 057) into Side
and Front panels.
Medium unit (XY-M model) ONLY:

4
Part No. Description Qty
002 Side Panel 2
003 Rear Panel 1
004 Front Panel 1
005 Removable Front Door 1
006 Top Door 1
007 Corner Bracket 4
008 Hinge Pin 2
009 Door Stay 2
010 Door Latch 2
012 Plastic Cap 4
013 Lock Bracket 2
13B Lock Screws 2
014 Door Handle 2
056 Top Corner Bracket LH (XY-M only) 1
057 Top Corner Bracket RH (XY-M only) 1
Assembly and Parts
Small (XY-S) and Medium (XY-M)
Assembly Tools Required
Phillips screwdriver Mallet
www.acousticbox.com.au
1300 787 089
057
002
003
004
005
006
007
008
009
010
012
013
13B
014
056
XY-M only