ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION User manual

2 © Acronis, Inc
Copyright © Acronis, Inc., 2009. All rights reserved.
“Acronis”, “Acronis Compute with Confidence”, and the Acronis logo are trademarks of Acronis, Inc.
Linux is a registered trademark of Linus Torvalds.
Windows is a registered trademark of Microsoft Corporation.
All other trademarks and copyrights referred to are the property of their respective owners.
Distribution of substantively modified versions of this document is prohibited without the explicit
permission of the copyright holder.
Distribution of this work or derivative work in any standard (paper) book form for commercial
purposes is prohibited unless prior permission is obtained from the copyright holder.
DOCUMENTATION IS PROVIDED «AS IS» AND ALL EXPRESS OR IMPLIED CONDITIONS,
REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE
DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY
INVALID.

© Acronis, Inc 3
Table of Contents
1. Introducing Acronis® Snap Deploy® ...............................................................................6
1.1 Overview .......................................................................................................................... 6
1.1.1 What is Acronis Snap Deploy ........................................................................................ 6
1.1.2 Who needs Acronis Snap Deploy? ................................................................................ 6
1.1.3 Acronis Snap Deploy infrastructure................................................................................ 6
1.2 What you can do with Acronis Snap Deploy 3....................................................................... 7
1.2.1 Take an image of the master system (Acronis Snap Deploy 2.0 functionality).................... 7
1.2.2 Manual deployment (Acronis Snap Deploy 2.0 functionality) ............................................ 7
1.2.3 Scheduled deployment (new in v 3)............................................................................... 7
1.2.4 Event-driven deployment (new in v 3) ........................................................................... 8
1.2.5 Command line and scripting under Win PE (new in v 3) .................................................. 8
1.2.6 Standalone deployment (new in v 3) ............................................................................. 9
1.2.7 Custom Deployment (User-initiated deployment) (new in v 3) ......................................... 9
1.2.8 Deployment of a disk partition or MBR (new in v 3) ...................................................... 10
1.2.9 Selective deployment (MAC filtering) (new in v 3)......................................................... 10
1.2.10 Password protection (new in v 3) .............................................................................. 10
1.2.11 Manage a remote computer (Acronis Snap Deploy 2.0 functionality)............................. 10
1.3 What else is new in v 3?................................................................................................... 10
1.3.1 Encrypted communication .......................................................................................... 10
1.3.2 Multicast TTL and network bandwidth throttling ........................................................... 11
1.4 Supported operating systems............................................................................................ 11
1.5 License policy.................................................................................................................. 12
1.5.1 Server and workstation licenses .................................................................................. 12
1.5.2 Licenses for Acronis Universal Deploy .......................................................................... 12
1.5.3 Acronis Snap Deploy trial version ................................................................................ 12
1.6 Upgrade to v 3 ................................................................................................................ 12
1.6.1 Upgrading licenses..................................................................................................... 13
1.6.2 Upgrading components .............................................................................................. 13
1.7 Technical support ............................................................................................................ 13
2. Understanding Acronis Snap Deploy...............................................................................15
2.1 Terminology.................................................................................................................... 15
2.2 Components.................................................................................................................... 16
2.3 Support for file systems and storage media........................................................................ 17
2.3.1 Supported file systems ............................................................................................... 17
2.3.2 Supported media ....................................................................................................... 17
2.4 Usage............................................................................................................................. 17
2.4.1 Offline imaging.......................................................................................................... 18
2.4.2 Online imaging .......................................................................................................... 19
2.4.3 Deployment .............................................................................................................. 19
2.5 What is Acronis Universal Deploy ...................................................................................... 21
2.5.1 Acronis Universal Deploy purpose................................................................................ 21
2.5.2 Acronis Universal Deploy general principles.................................................................. 21
2.5.3 Acronis Universal Deploy and Microsoft Sysprep ........................................................... 22
2.5.4 Getting Acronis Universal Deploy................................................................................. 22
3. Installation .....................................................................................................................23
3.1 System requirements ....................................................................................................... 23
3.2 Used ports and IP addresses............................................................................................. 23
3.3 General rules of installation .............................................................................................. 24
3.3.1 Installation file........................................................................................................... 24
3.3.2 Common installation configurations ............................................................................. 24
3.4 Installation of Acronis Snap Deploy Management Console ................................................... 26
3.5 Installation of Acronis License Server................................................................................. 26
3.5.1 Installation................................................................................................................ 26
3.5.2 Adding licenses using Acronis Snap Deploy Management Console .................................. 27

4 © Acronis, Inc
3.5.3 Adding licenses in command line mode........................................................................ 28
3.6 Installation of Acronis OS Deploy Server ............................................................................ 28
3.7 Installation and setup of Acronis PXE Server ...................................................................... 29
3.7.1 Installation of Acronis PXE Server................................................................................ 29
3.7.2 Setting up a computer to boot from PXE ...................................................................... 29
3.7.3 Setting up the PXE to work in other subnet.................................................................. 30
3.8 Installation of Acronis WOL Proxy...................................................................................... 30
3.9 Installation of Acronis Snap Deploy Management Agent ...................................................... 30
3.10 Installation of Acronis Universal Deploy............................................................................ 31
3.11 Extracting the Acronis Snap Deploy components............................................................... 31
3.12 Using Acronis License Server........................................................................................... 32
3.12.1 Understanding Acronis License Server........................................................................ 32
3.12.2 Viewing information about licenses............................................................................ 32
3.12.3 Removing licenses ................................................................................................... 34
3.12.4 Using the Acronis License Server Management Tool .................................................... 34
4. Using Acronis Snap Deploy Management Console..........................................................35
4.1 Connections .................................................................................................................... 35
4.1.1 Connect to a local machine......................................................................................... 35
4.1.2 Connect to another computer ..................................................................................... 35
4.2 Installation and update of Acronis components on remote computers................................... 36
4.3 Browsing logs.................................................................................................................. 37
5. Creating Acronis bootable media....................................................................................38
6. Configuring PXE Server...................................................................................................42
7. Taking an image..............................................................................................................43
7.1 Preparation of the master OS............................................................................................ 43
7.2 Online vs. offline imaging ................................................................................................. 43
7.3 Starting offline imaging .................................................................................................... 44
7.4 Starting online imaging .................................................................................................... 46
7.5 Steps of the Master Image Creation Wizard........................................................................ 46
7.5.1 Disks or partitions to image ........................................................................................ 46
7.5.2 Image name and location........................................................................................... 47
7.5.3 Setting options .......................................................................................................... 48
7.5.4 Comments and summary............................................................................................ 50
8. Checking the master image ............................................................................................51
9. Deployment templates....................................................................................................52
9.1 Why save templates? ....................................................................................................... 52
9.2 Creating templates........................................................................................................... 52
9.2.1 Master image selection............................................................................................... 52
9.2.2 Disk/partition selection............................................................................................... 53
9.2.3 Target disk and partition selection............................................................................... 55
9.2.4 User accounts............................................................................................................ 56
9.2.5 Computer names and domain/workgroup .................................................................... 56
9.2.6 Network settings........................................................................................................ 58
9.2.7 Security identifiers ..................................................................................................... 59
9.2.8 Transferring files ....................................................................................................... 59
9.2.9 Executing applications................................................................................................ 59
9.2.10 Using Acronis Universal Deploy ................................................................................. 59
9.2.11 Deployment options ................................................................................................. 61
9.2.12 Comments and summary.......................................................................................... 65
10. Standalone deployment................................................................................................67
11. Manual deployment ......................................................................................................69
11.1 Booting up the targets.................................................................................................... 69
11.2 Starting deployment....................................................................................................... 71
12. Event-driven deployment .............................................................................................73
13. Scheduled deployment .................................................................................................76
13.1 Preparation steps........................................................................................................... 76
13.1.1 Getting MAC addresses............................................................................................. 76
13.1.2 Enabling WOL on targets .......................................................................................... 76

© Acronis, Inc 5
13.2 Scheduled deployment within one subnet......................................................................... 77
13.3 Scheduled deployment in other subnet ............................................................................ 79
13.4 Operations with scheduled tasks ..................................................................................... 81
14. Custom deployment mode............................................................................................83
14. 1 Understanding custom deployment................................................................................. 83
14. 2 Considerations and tips ................................................................................................. 84
14. 3 Setting up the custom deployment mode ........................................................................ 85
14. 4 Changing parameters of the custom deployment mode .................................................... 87
14. 5 Closing the custom deployment mode............................................................................. 87
15. Command line and scripting under Win PE and Bart PE...............................................88
15.1 Adding ASD command line utility to PE ............................................................................ 88
15.1.1 Acronis Snap Deploy PE Builder................................................................................. 88
15.1.2 Adding ASD command line utility to PE 1.0................................................................. 89
15.1.3 Adding ASD command line utility to PE 2.0................................................................. 90
15.2 Uploading PE images to Acronis PXE Server...................................................................... 90
15.3 ASD command line syntax .............................................................................................. 91
15.3.1 Supported commands............................................................................................... 91
15.3.2 Common options (options common for most asdcmd commands) ................................ 92
15.3.4 asdcmd usage examples........................................................................................... 96
15.4 Sample scenarios ........................................................................................................... 96
15.4.1 Deploying images assigned to targets........................................................................ 96
15.4.2 Creating images assigned to targets .......................................................................... 97
16. Managing a remote computer.......................................................................................99
16.1 File management on a remote computer.......................................................................... 99
16.2 Executing applications on a remote computer..................................................................100

6 © Acronis, Inc
1. Introducing Acronis® Snap Deploy®
This chapter gives a general idea of how an IT department can meet various real life challenges using
the Acronis Snap Deploy.
1.1 Overview
1.1.1 What is Acronis Snap Deploy
Acronis Snap Deploy is a flexible, efficient software solution for deployment of a fully configured
operating system (with or without application software and any other data) to multiple computers.
Because the product uses disk imaging technology, it is ideal for rapid bare-metal installations and
flexible centralized provisioning.
1.1.2 Who needs Acronis Snap Deploy?
Acronis Snap Deploy is primarily designed to be used by:
Small and medium-size businesses:
-IT service providers
-Hardware retailers
IT departments of larger corporations
Schools and universities
R&D and software testing labs.
The enterprise features added to Acronis Snap Deploy v 3 (scheduled deployment, support for
Preinstallation Environment, command line and scripting, to name a few) can help automate the tasks
of the IT department in large enterprise environments.
1.1.3 Acronis Snap Deploy infrastructure
Components of the Acronis infrastructure are installed on Windows computers. Centralized imaging,
deployment and managing the Acronis infrastructure is performed using Acronis Snap Deploy
Management Console.
A reference image can be taken either in Windows or in the Acronis or Windows PE environment. The
Acronis environment provides the GUI mode. Under Windows PE, command line mode and scripting
are supported.
Deployment is performed in the Acronis or Windows PE environment.
A dedicated bootable utility enables full functional deployment with GUI on a standalone computer (a
computer isolated from the network or included in a network without Acronis Snap Deploy
infrastructure.)

© Acronis, Inc 7
1.2 What you can do with Acronis Snap Deploy 3
1.2.1 Take an image of the master system (Acronis Snap Deploy 2.0
functionality)
First, you create the desired system configuration and save the image of the system hard disk on a
network share, detachable or removable media. Image is a file that contains the system in a packaged
form.
Scenarios:
1. Usually, company departments, such as accounting, sales or technical support, use a fixed set
of applications for daily work. Capture an entire library of images and deploy them to new
hardware without having to manually configure the operating system and applications.
2. The administrator might need to deploy a standard configuration included in the library on
various hardware. The separately sold Acronis Universal Deploy option can configure Windows
system drivers so that Windows is able to boot on dissimilar hardware. Without this option the
motherboard, processors and mass storage devices of the imaged and the target hardware
must be identical. The same applies to non-Windows operating systems.
1.2.2 Manual deployment (Acronis Snap Deploy 2.0 functionality)
Boot the target computers (the computers to deploy to) into Acronis environment using Acronis
bootable media or Acronis PXE (Preboot eXecution Environment) Server. Set up and save parameters
of the deployment operation (the deployment template.)
Launch the deployment. The program multicasts the image to the computers you specified and
deploys the system on their hard disks. DNS names, domain or workgroup membership, TCP/IP
settings, user accounts and security identifiers are assigned on the fly according to the settings you
made.
Once the deployment is completed, the computers boot up from their hard disks. The program can
shut down or restart the computers according to the settings you made. Sometimes you will have to
complete configuration of devices, otherwise the computers are ready to work. (Activation of the
operating system is needed though.)
1.2.3 Scheduled deployment (new in v 3)
Deployment can be run on a schedule.
Scheduling presumes that when the scheduled time comes, the program will power on the target
computers with predefined MAC addresses using the BIOS Wake On LAN (WOL) functionality.
Computers in other subnets can be woken through a WOL proxy agent delivered with Acronis Snap
Deploy.
Computers that do not support WOL can be booted into Acronis environment manually before the
scheduled time comes. Such computers will also be deployed provided that their MAC addresses are
included in the total list.
Scenarios:

8 © Acronis, Inc
1. An organization receives a shipment of computers from a manufacturer along with the list of
their MAC addresses. The IT department has to deploy the operating system to the new
hardware.
2. An Internet café, school or university lab has 100 computers with known MAC addresses. The
nightly deployment of the initial standard image on these computers is needed.
1.2.4 Event-driven deployment (new in v 3)
Deployment can be run when the predefined number of computers is ready. The program counts how
many computers have connected to the deployment server and starts multicasting when the
predefined number of computers is connected.
The administrator can specify a time-out period. On time-out, deployment will start on the computers
that are ready despite that the predefined number is not reached.
Scenario:
1. An organization receives 100 computers from a manufacturer. The IT department has to
deploy systems, preconfigured according to the employees’ roles, to the predefined number of
computers. For example, 10 computers for accountants, 10 computers for the marketing
department, 70 computers for sales and 10 for the managers.
1.2.5 Command line and scripting under Win PE (new in v 3)
Acronis Snap Deploy provides a command line utility that can be added to a Windows Preinstallation
Environment (Win PE) image. The administrator uploads the customized PE image to a PXE server or
transfers the PE image onto removable media.
Having booted a machine in the Preinstallation Environment, the administrator can perform imaging or
deployment in the command line mode or execute scripts.
Using Acronis Snap Deploy in Windows Preinstallation Environment allows a combination of both the
products facilities and provides more functionality than using only-Acronis bootable media. The
following scenarios can be implemented using Acronis Snap Deploy command line and Win PE.
Scenarios:
1. The administrator might need to deploy diverse images on each of the networked computers.
The administrator writes a deployment script that can read the target’s MAC address (for example, 01-
02-03-04-05-06) and pull an image with a name corresponding to the MAC address (for example,
image-01-02-03-04-05-06.tib) from any convenient location. The script can be executed on any
number of targets.
2. The administrator might need to start imaging or deployment automatically each time a
networked computer boots from the PXE server.
The administrator creates an imaging or deployment script, adds the script to the PE and includes the
script in the
startnet.cmd file. On booting into the PE, the operation will be performed automatically.
3. The administrator might need to automatically execute pre-deployment operations (disk
partitioning, for example) on the networked computers.

© Acronis, Inc 9
The administrator creates a script that performs pre-deployment operations, adds the script along with
deployment script to the PE and includes both scripts in the
startnet.cmd file. On booting into the PE,
both operations will be performed automatically.
4. The administrator might need to execute imaging or deployment in Win PE environment if the
Acronis environment lacks Linux drivers for some exotic hardware.
Limitation:
Acronis Snap Deploy command line utility can generate a new SID but cannot adjust other
settings on the fly. To change the computer name, domain or workgroup membership and
other settings, apply the Microsoft System Preparation Tool (Sysprep) to the master system
and specify the new settings in the Sysprep.inf answer file.
1.2.6 Standalone deployment (new in v 3)
The administrator might need to deploy on a computer isolated from a network or included in a
network without Acronis Snap Deploy infrastructure. A dedicated bootable utility enables full functional
deployment with GUI on a standalone computer.
The Acronis Universal Deploy option is not available in the standalone mode.
1.2.7 Custom Deployment (User-initiated deployment) (new in v 3)
Acronis Snap Deploy can be configured in such a way that users will be able to deploy and re-deploy
their computers with one click on the boot menu.
Scenarios:
1. Software testers have to deploy clean operating systems or preconfigured systems on test
machines. A test team leader creates custom bootable media or a PXE package that provides a
fixed set of choices on the target side. A test team member reboots a test computer and
selects what to deploy from the boot menu with one click. The deployment starts immediately.
The choices can be various operating systems, various editions of the same operating system,
the same operating system with various settings or various applications, to name a few. The
deployment proceeds independently on each computer.
2. The same scenario fits in a university or school lab when switching between exercises requires
reconfiguring the computer entirely. Students can switch or restart exercises without the
teacher’s assistance.
If a student messes up the machine (deletes a file, changes configuration, etc.) then he/she
could choose a self-restore option from the boot menu.
The custom deployment mode is intended for continual work without the administrator’s assistance.
Once the mode is set, other methods of deployment (manual, scheduled, event-driven deployment)
become unavailable. Any scheduled task that has to start while the custom deployment mode is on,
will not start. Only users (the ones on the target side) can initiate deployment. However, the
administrator can view logs, create new deployment templates, change the custom deployment
configuration (add, edit or remove boot menu items) and perform other management operations
except for deployment.
To initiate deployment on the console side, the administrator switches off the custom deployment
mode.

10 © Acronis, Inc
1.2.8 Deployment of a disk partition or MBR (new in v 3)
You do not necessarily have to deploy the entire disk. Provided the master and the target disks have a
similar partitioning scheme, you can image and deploy only the system partition or only the data,
depending on your needs.
Acronis Snap Deploy can image and deploy the Master Boot Record (MBR).
1.2.9 Selective deployment (MAC filtering) (new in v 3)
Acronis Snap Deploy has the ability to disable deployment on computers with specified MAC addresses.
This protects production servers and user’s systems from unfortunate events. The program can import
the access list from a text file. Both straight (enabling) and inverse (disabling) lists are supported.
Scenario:
1. Let’s say, a networked computer boots up from PXE by mistake. The new image then might be
deployed on the computer by an event-driven operation or by the PE configured to start
deployment upon booting. The original data will be lost.
1.2.10 Password protection (new in v 3)
Images taken with Acronis Snap Deploy can be protected with a password to prevent unauthorized
deployment.
Acronis Snap Deploy also supports password protected images created with the Acronis True Image
products family.
To prevent Acronis bootable components from unauthorized execution, the Acronis boot menu can
also be protected with a password.
1.2.11 Manage a remote computer (Acronis Snap Deploy 2.0
functionality)
An administrator can perform operations on a remote computer using Acronis Snap Deploy.
File management: Create and edit text files (for example batch files or scripts), copy files/folders to
the clipboard, paste them, rename and delete files and folders.
Applications management: Execute service applications (configuration files, scripts) on a remote
computer by scheduling tasks. The scheduled task contains the application to execute and when the
application will be run.
1.3 What else is new in v 3?
1.3.1 Encrypted communication

© Acronis, Inc 11
Acronis Snap Deploy components communicate to each other using the Secure Sockets Layer (SSL)
cryptographic protocol. Encryption starts on the first (earliest) stage of connection attempt, so all data
transferred in the next steps (including data required for client authentication) is encrypted.
Once Acronis Snap Deploy components are installed, encrypted communication between the
components is enabled automatically. The deploy stream, being transferred via the communication
protocol, is not encrypted.
1.3.2 Multicast TTL and network bandwidth throttling
Deployment configuration has a parameter that specifies time to live (TTL) for multicast packets. Using
this setting, you can limit the distribution of multicast packets via gateways.
By setting the permitted bandwidth you can limit the network usage during deployment.
1.4 Supported operating systems
Acronis Snap Deploy provides full-featured imaging and deployment of the following operating
systems:
Deployment Change
settings License type*
MS Windows Server 2008 (TBD) Yes Yes S
MS Windows Server 2003 Service Pack 2 (x86, x64) Yes Yes S
MS Windows Server 2003 R2 (x86, x64) Yes Yes S
MS Windows Small Business Server 2003 Yes Yes S
MS Windows Storage Server 2003 R2 Yes Yes S
MS Windows Server 2003 x64 Editions Yes Yes S
MS Windows 2000 Server Yes Yes S
MS Windows 2000 Advanced Server Yes Yes S
MS Windows 2000 Professional SP4 Yes Yes S
MS Windows Vista Home Basic (x86, x64) Yes Yes WS
MS Windows Vista Home Premium (x86, x64) Yes Yes WS
MS Windows Vista Business (x86, x64) Yes Yes WS
MS Windows Vista Ultimate (x86, x64) Yes Yes WS
MS Windows XP Home Yes Yes WS
MS Windows XP Professional Yes Yes WS
MS Windows XP Professional x64 Edition Yes Yes WS
MS Windows XP Professional SP2 Yes Yes WS
MS Windows NT/4.0 Server Yes No S
MS Windows 98/Me Yes No WS
Linux (kernel: 2.4.9 – 2.6.x) Yes No S
* - S – server license, WS – workstation license.
Acronis Snap Deploy enables, with certain limitations (some operations or options will not be
available), imaging and deployment of any PC-based operating system. For example, Windows
98/NT/ME, NT/4.0 Server, Linux (kernel: 2.4.9 – 2.6.x) can be deployed only as is, on-the-fly settings
adjustment is not performed.
The Acronis Universal Deploy option is not applicable to Windows 98/NT/ME and NT/4.0 Server.

12 © Acronis, Inc
1.5 License policy
Acronis Snap Deploy licensing is based on the number of deployed and/or managed computers
(servers or workstations.) For example, to deploy a system on 100 computers you need 100
deployment licenses. No additional licenses are required to manage the deployed computers or re-
deploy any of them.
1.5.1 Server and workstation licenses
Acronis Snap Deploy has two types of licenses. A license for the server product is needed to deploy a
server operating system or install the management agent on a server operating system. A license for
the workstation product is needed to deploy a workstation operating system or install the management
agent on a workstation operating system.
A workstation license is needed to deploy a disk or partition that does not contain an operating
system, if the target computer has not been assigned a license before.
Linux is considered as a server OS. The explicit list of server and workstation operating systems is in
the previous section.
If Acronis Snap Deploy fails to identify the type of operating system, the operating system is
considered as a workstation OS.
A server license could be used instead of a workstation license automatically or through a prompt.
1.5.2 Licenses for Acronis Universal Deploy
Acronis Universal Deploy is an add-on to Acronis Snap Deploy and has its own serial numbers and
license agreement.
The Acronis Universal Deploy licenses are counted, used and upgraded in the same way as the Acronis
Snap Deploy licenses. Acronis Universal Deploy also has two types of licenses for server and
workstation operating systems. You need one Universal Deploy license per target computer.
You do not need a license to install Acronis Universal Deploy. However, do not forget to add the
Acronis Universal Deploy licenses to the license server before starting deployment. If the licenses are
not found during deployment, the Acronis Universal Deploy step will be skipped.
1.5.3 Acronis Snap Deploy trial version
The Acronis Snap Deploy trial version has all the functionality of the standard version. To upgrade
from the trial version to the standard product you do not need to re-download the software. Simply
buy the licenses and import them to the license server.
1.6 Upgrade to v 3
To upgrade from Acronis Snap Deploy version 2.0 or 1.0 to version 3, upgrade both the licenses and
the program components.

© Acronis, Inc 13
1.6.1 Upgrading licenses
Buy the necessary number of upgrade licenses and import the licenses to your license server.
The table below illustrates how the various combinations of licenses will be upgraded. Use the table to
calculate the number of 3 upgrade licenses you need.
What you can do with ASD 3 after the upgrade
1 2 3 4 5 6 7
Deploy to
any target
Deploy to
Host1
Deploy to
any target
Deploy to
Host1
Deploy to
any target
Deploy to
Host1
Deploy to
any target
You
buy
3 Upg 3 Upg 3 Upg 3 Upg 3 Upg 3 Upg 3
You
have
- - 2.0 Upg 2.0 Upg 2.0 2.0 -
1.0 1.0 1.0 1.0 - - -
New Used
(assigned
to Host1)
New Used
(assigned
to Host1)
New Used
(assigned
to Host1)
-
(1) You have a v 1.0 license that has not yet been used. Import a v 3 upgrade license. You will be
able to deploy to any computer with Acronis Snap Deploy 3.
(2) You have a v 1.0 license that is used and assigned to the computer Host1. Import a v 3
upgrade license. You will be able to deploy to Host1 with Acronis Snap Deploy 3.
(3) You have a combination of v 1.0 license and v 2.0 upgrade license. The licenses have not yet
been used. Import a v 3 upgrade license. You will be able to deploy to any computer with
Acronis Snap Deploy 3.
(4) You have a combination of v 1.0 license and v 2.0 upgrade license. Either license is assigned
to the computer Host1 by v 1.0 or v 2.0. Import a v 3 upgrade license. You will be able to
deploy to Host1 with Acronis Snap Deploy 3.
(5) You have a v 2.0 license that has not yet been used. Import a v 3 upgrade license. You will be
able to deploy to any computer with ASD 3.
(6) You have a v 2.0 license that is used and assigned to the computer Host1. Import a v 3
upgrade license. You will be able to deploy to Host1 with Acronis Snap Deploy 3.
(7) You don’t have any ASD licenses. Import a v 3 license. You will be able to deploy to any
computer with ASD 3.
1.6.2 Upgrading components
Install the components of v 3 over the v 2.0 or v 1.0 components.
Components of v 3 cannot communicate with v 2.0 and v 1.0 components since they use
cryptographic communication protocol that was not supported by the previous program
versions. Remove old Acronis Snap Deploy components, if the new components are installed
on other computers.
1.7 Technical support
As part of a purchased annual Support charge you are entitled to Technical Support as follows: to the
extent that electronic services are available, you may electronically access at no additional charge,
Support services for the Software, which Acronis shall endeavor to make available twenty four (24)
hours a day, seven (7) days per week. Such electronic services may include, but are not limited to:
user forums; software-specific information; hints and tips; bug fix retrieval via the internet; software

14 © Acronis, Inc
maintenance and demonstration code retrieval via a WAN-accessible FTP server; and access to a
problem resolution database via Acronis customer support system.
Support shall consist of supplying telephone or other electronic support to you in order to help you
locate and, on its own, correct problems with the Software and supplying patches, updates and other
changes that Acronis, at its sole discretion, makes or adds to the Software and which Acronis makes
generally available, without additional charge, to other licensees of the Software that are enrolled in
Support. Upon mutual agreement by both parties, Acronis shall: (i) supply code corrections to you to
correct Software malfunctions in order to bring such Software into substantial conformity with the
published operating specifications for the most current version of the Software unless your
unauthorized modifications prohibit or hamper such corrections or cause the malfunction; or (ii) supply
code corrections to correct insubstantial problems at the next general release of the Software.
More information about contacting Acronis Technical Support is available at the following link:
http://www.acronis.com/enterprise/support/

© Acronis, Inc 15
2. Understanding Acronis Snap Deploy
This chapter describes the Acronis Snap Deploy infrastructure components and their interaction.
2.1 Terminology
The following table lists the common terms and descriptions used in this document.
Master system The system to be deployed.
Master image
(Image)
A file that contains the master system in a packaged form. The file has a
“.tib” extension.
Online imaging Taking an image while the master system is in a production state (the
operating system is running on the master computer.)
Offline imaging Taking an image while the master computer is booted into Acronis or
Windows preinstallation environment.
Deployment Transferring the operating system (OS), applications and data from the
master image file to a physical hard disk. In most cases, deployment is
performed by multicasting the image through the network.
Standalone
deployment
Deployment on a computer isolated from a network or included in a
network without Acronis Snap Deploy infrastructure. Standalone
deployment is performed locally using the bootable Acronis Snap Deploy
component.
Target disk The physical disk to be deployed to (an internal hard disk of the target
computer.)
Target computer
(Target)
The hardware to be deployed to.
Deployment
template
(Template)
Configuration parameters of the deployment operation:
1. Path to the master image
2. The operation mode (multicast or unicast, how to handle the target disk
free space etc.)
3. Settings to be applied to the deployed systems (DNS names, user
accounts etc.)
4. Operations to be performed on the deployed systems (transfer files,
execute applications, shut down, restart)
Once you save a deployment template, you can use it in the future.
Administrator The person who has rights to manage Acronis Snap Deploy infrastructure.
Custom
deployment
mode
The mode when deployment can be initiated on the target side only.
User The person on the target side who initiates the custom deployment. This
term relates to the custom deployment mode only.

16 © Acronis, Inc
2.2 Components
Acronis Snap Deploy includes the following components:
1. Acronis Snap Deploy Management Console is an administrative tool for remote access to
Acronis servers and Acronis Snap Deploy Management Agent.
When disconnected from the Acronis components, the console allows only installing Acronis
products on remote machines.
2. Acronis OS Deploy Server is a component that performs centralized deployment through the
network with the help of Acronis Snap Deploy Agents.
3. Acronis Snap Deploy Agent is a bootable component that performs deployment on each target
computer under control of the Acronis OS Deploy Server.
There are two ways to load Acronis Snap Deploy Agent on target computers: locally from bootable
media or remotely using Acronis PXE Server.
4. Acronis Master Image Creator is a bootable, locally controlled component that takes an image
of the master system.
There are two ways to load Acronis Master Image Creator on a master computer: directly from
bootable media or remotely using Acronis PXE Server.
5. Acronis Snap Deploy Management Agent is a component that takes an image of the master
system in Windows environment under the administrator’s control through the Acronis Snap
Deploy Management Console. The administrator can also manage files and execute applications on
a remote computer using Acronis Snap Deploy Management Agent.
6. Acronis PXE Server allows for network booting computers into Acronis Snap Deploy Agent,
Acronis Master Image Creator or Preinstallation Environment. The computers must support PXE.
Using Acronis PXE Server considerably reduces the time required for booting multiple computers
as compared to using bootable media. It also eliminates the need to have a technician onsite to
install the bootable media into the system that must be booted.
7. Acronis Wake on LAN Proxy is a component that enables the Acronis OS Deploy Server to
wake the target computers located in the other subnet.
8. Acronis Standalone Utility is a bootable component that enables full functional deployment
with GUI on a standalone computer (a computer isolated from the network or included in a
network without Acronis Snap Deploy infrastructure.)
9. Acronis License Server is a component that tracks licenses of Acronis products.
10. Acronis Universal Deploy (optional) is an add-on to Acronis Snap Deploy that enables
hardware-independent operating system deployment.

© Acronis, Inc 17
2.3 Support for file systems and storage media
2.3.1 Supported file systems
Acronis Snap Deploy provides full-featured imaging and deployment of the following file systems:
-FAT16/32
-NTFS
-Ext2/Ext3
-ReiserFS
-Reiser4
-Linux SWAP
-XFS
-JFS
2.3.2 Supported media
Acronis Master Image Creator can save an image:
-on a network share
-on the master computer internal hard drive
-on USB and FireWire (IEEE-1394) storage devices (hard drives, flash drives) attached to the
master computer
-on DVD+R/RW, DVD-R/RW, CD-R/RW loaded in the master computer media drive.
A sizeable image can be split between multiple media automatically.
Acronis OS Deploy Server can deploy images located:
-in network shared folders
-on the deploy server internal hard drive
-on USB and FireWire (IEEE-1394) storage devices (hard drives, flash drives) attached to the
deploy server
-on DVD+R/RW, DVD-R/RW, CD-R/RW loaded in the deploy server media drive.
The best practice is keeping images on the deploy server hard drive. This minimizes network traffic
during deployment.
The image created on removable media has to fit into one media disk. To deploy an image spread
over several CDs, DVDs or other media, copy all parts of the image to the same folder on the deploy
server or on a network share.
Acronis Standalone Utility can deploy images located:
-in network shared folders
-on USB and FireWire (IEEE-1394) storage devices (hard drives, flash drives) attached to the
managed computer
-on DVD+R/RW, DVD-R/RW, CD-R/RW loaded in the managed computer media drive.
The image created on removable media has to fit into one media disk. To deploy an image spread
over several CDs, DVDs or other media, copy all parts of the image to the same folder on an external
drive or a network share.
2.4 Usage
This section gives a general idea of using the product and does not contain the detailed instructions on
how to perform operations. Nevertheless, advanced users are welcome to use this section as a step-
by-step quick start guide. The details can be found in the further User’s Guide sections.

18 © Acronis, Inc
2.4.1 Offline imaging
Offline imaging means that the master system is stopped and the master computer boots into Acronis
(or PE) environment.
1. Configure the master system.
2. Install Acronis Snap Deploy Management Console.
3. Do one of the following:
Create bootable media with Acronis Master Image Creator (or PE with Acronis Snap Deploy command
line utility)
or
Install Acronis PXE Server, connect the console to the PXE server and upload Acronis Master Image
Creator (or PE with Acronis Snap Deploy command line utility.)
4. Do one of the following, depending on your choice in step 3:
Boot the master computer into Acronis Master Image Creator (or PE) from bootable media
or
Boot the master computer into Acronis Master Image Creator (or PE) from the PXE Server.
5. On the master computer, follow the Create Image Wizard instructions to configure and launch the
imaging operation (or perform imaging in PE using Acronis command line). The image can be
saved on a network share, detachable or removable media. To access the network from a
bootable environment, you must have a DHCP server or configure the master computer network
settings manually.
Offline imaging

© Acronis, Inc 19
2.4.2 Online imaging
Online imaging means that the master system is imaged live (without reboot or suspending
operations.) Online imaging can be performed remotely whenever you need. The disadvantage is that
you have to install imaging software that (1) takes a license and (2) is included in the master image.
This is not always rational.
1. Configure the master system.
2. Install Acronis Snap Deploy Management Console and Acronis License Server. Import licenses to
the license server.
3. Install Acronis Snap Deploy Management Agent on the master system locally or remotely, using
Acronis Snap Deploy Management Console. This will take a license from the license server. Reboot
on prompt. Once Acronis Snap Deploy Management Agent is installed, you can image the master
system online (without reboot) at any time.
4. Connect the console to the master system, click Create Master Image -> Next -> Create master
image on a remote computer. Follow the Create Image Wizard instructions to configure and
launch the imaging operation. The image can be saved on a network share, detachable or
removable media.
Online imaging
2.4.3 Deployment
The following illustrates the Acronis components functionality by the example of manual deployment.
During event-driven and scheduled deployment the components perform similarly.
Deployment presumes that you have created a master image, so at least the Acronis Snap Deploy
Management Console is installed.
1. Install Acronis License Server. Import licenses to the license server. Install Acronis OS Deploy
Server.
2. Do one of the following:

20 © Acronis, Inc
Create bootable media with Acronis Snap Deploy Agent (or PE with Acronis Snap Deploy command line
utility)
or
Install Acronis PXE Server, connect the console to the PXE server and upload Acronis Snap Deploy
Agent (or PE with Acronis Snap Deploy command line utility.)
3. Do one of the following, depending on your choice in step 2:
Boot the target computer(s) into Acronis Snap Deploy Agent (or PE) from bootable media
or
Boot the target computer(s) into Acronis Snap Deploy Agent (or PE) from the PXE Server.
You must have a DHCP server or configure the target computers network settings manually to enable
the target computers to connect to Acronis OS Deploy Server.
4. Do one of the following, depending on whether the agent or the PE is running:
-Connect the console to the Acronis OS Deploy Server. Select the Deployment tab
-Make sure that the target computers IP addresses are displayed on the Deployment tab. This
means that the computers are connected and ready for deployment
-Click Manual Deployment and follow the Manual Deployment Wizard instructions to configure and
launch the deployment operation
or
-perform deployment in PE using Acronis command line utility.
Manual deployment