HP 348773-001 User manual

®
User’s Guide
hp iPAQ Navigation System
September 2003
Part Number 348773-001

© 2003 Hewlett-Packard Company
Microsoft, MS-DOS, Windows, Windows NT, ActiveSync, and Outlook are trademarks of
Microsoft Corporation in the U.S. and other countries.
Intel, Pentium, Intel Inside, and Celeron are trademarks of Intel Corporation in the U.S. and other
countries.
Adobe, Acrobat, and Acrobat Reader are trademarks or registered trademarks of
Adobe Systems Incorporated.
SD is a trademark of Secure Digital.
All other product names mentioned herein may be trademarks of their respective
companies.
Hewlett-Packard Company shall not be liable for technical or editorial errors or
omissions contained herein or for incidental or consequential damages in con-
nection with the furnishing, performance, or use of this material. The information
in this document is provided “as is” without warranty of any kind, including, but
not limited to, the implied warranties of merchantability and fitness for a particular
purpose, and is subject to change without notice. The warranties for HP products
are set forth in the express limited warranty statements accompanying such
products. Nothing herein should be construed as constituting an additional
warranty.
This document contains proprietary information that is protected by copyright. No
part of this document may be photocopied, reproduced, or translated to another
language without the prior written consent of Hewlett-Packard Company.
User’s Guide
hp iPAQ Navigation System
First Edition September 2003
Part Number 348773-001
WARNING: Text set off in this manner
indicates that failure to follow directions
could result in bodily harm or loss of life.
Caution: Text set off in this manner
indicates that failure to follow directions
could damage to equipment or loss of
information.

User’s Guide i
Table of Contents
Getting Started
What Is In the Box? ............................................................................................................... 1-2
System Requirements.............................................................................................................1-3
Loading the Navigation System Software ............................................................................. 1-4
Selecting and Downloading a Map by Region ............................................................... 1-5
Selecting and Downloading a Map By City .................................................................... 1-6
Downloading Additional Maps........................................................................................ 1-7
Closing the Navigation System.............................................................................................. 1-8
Using the HP iPAQ GPS Bluetooth Receiver
Learning About Bluetooth GPS Features .............................................................................. 2-1
Setting Up the Bluetooth GPS Receiver................................................................................ 2-2
Manually Partnering for Windows Mobile 2002 Operating System ............................... 2-3
Establishing a Connection................................................................................................ 2-3
Manually Partnering for Windows Mobile 2003 Operating System ............................... 2-5
Establishing a Connection................................................................................................ 2-5
Checking the GPS Connection Status.............................................................................. 2-8
Receiving Satellite Signals .............................................................................................. 2-9
Getting Acquainted with Navigation System
Moving Around the Map ....................................................................................................... 3-3
Panning the Map .............................................................................................................. 3-3
Zooming the Map............................................................................................................. 3-3
Using Menus.......................................................................................................................... 3-4
Main Menu.......................................................................................................................3-5
File Menu......................................................................................................................... 3-6
Tools Menu......................................................................................................................3-7
View Menu.......................................................................................................................3-8
Pop Up Menu................................................................................................................... 3-9

User’s Guide ii
Setting Options..................................................................................................................... 3-10
Selecting the Map Display View ................................................................................... 3-10
Map View................................................................................................................. 3-10
Map View Modes..................................................................................................... 3-11
Guidance View......................................................................................................... 3-13
Setting Voice Guidance ................................................................................................. 3-14
Setting Route Options.................................................................................................... 3-15
Setting Safety Options ................................................................................................... 3-16
Recording a Route.......................................................................................................... 3-18
Replaying Route Instructions................................................................................... 3-19
Using The Navigation System
Entering a Start Location .......................................................................................................4-1
Entering a Destination............................................................................................................ 4-2
Setting a Destination by Address..................................................................................... 4-3
Setting a Destination by Intersection.............................................................................. 4-6
Setting a Destination by Point of Interest ........................................................................ 4-9
Selecting a POI Alphabetically................................................................................ 4-11
Selecting a POI By Distance.................................................................................... 4-12
Selecting a POI By City........................................................................................... 4-13
Setting a Destination From the Contacts List ................................................................ 4-15
Setting a Destination From the Favorites Location List................................................ 4-17
Setting a Destination from the Recent Destinations List............................................... 4-18
Managing the Destination and Route................................................................................... 4-19
Entering a Detour........................................................................................................... 4-20
Entering Stopovers......................................................................................................... 4-22
Clearing a Selected Destination..................................................................................... 4-22
Navigating the Vehicle......................................................................................................... 4-23
Using Day vs. Night Display ......................................................................................... 4-23
Viewing the Route List.................................................................................................. 4-25

User’s Guide iii
Software Technical Support
General Definition.................................................................................................................. 5-1
Obtaining Support.................................................................................................................. 5-1
Performing a Soft Reset.........................................................................................................5-1
Troubleshooting................................................................................................. 6-1
Appendix................................................................................................................... A-1

User’s Guide 1-1
Getting Started
HP iPAQ Navigation System is a full featured software using the latest in satellite technology and
detailed street maps from Navigation Technologies. This software guides you through the most
complex streets with ease.
The Navigation System is designed for the HP iPAQ PocketPC. Since the map of the United States
and Canada is very large, it does not fit on the HP iPAQ PocketPC. You can transfer map data by
city or state, but not both at the same time. To transfer the portion of the map you want to your
iPAQ PocketPC, use the companion map loading software on your desktop (or laptop). The time
needed to download a map varies based on system capabilities.
When you travel to a different area of the country, the map loader lets you easily change the maps
on your iPAQ PocketPC, as needed.
In the following sections, you learn about:
What’s in the Navigation System Box.
System Requirements.
Installing the Navigation System Software.
The HP iPAQ Navigation System is referred to as Navigation System in this
User’s Guide.
CAUTION! You should limit the size of the map data downloaded to your iPAQ
PocketPC to <100 MB. If you download too much data, Navigation System
may not run. You must then perform a soft reset and remove the maps from
the SD or CF card.

What is in the Box?
User’s Guide 1-2
What is in the Box?
The Navigation System box includes the following items:
If you are missing any items, contact your dealer.
1 iPAQ Bluetooth™GPS Receiver.
2 12 V DC Adapter for charging in the car.
3 CD ROM 1 including:
Navigation application (Desktop and Pocket PC application).
Western U.S. and Canada map data.
User’s Guide.
4CD ROM 2 including Eastern U.S. and Canada map data.
3
4

System Requirements
User’s Guide 1-3
System Requirements
The Navigation System is designed to run on any HP iPAQ Bluetooth enabled pocket PC, includ-
ing:
HP iPAQ 1940/45
HP iPAQ 2210/15
HP iPAQ 5450/55
HP iPAQ 5450/55
HP iPAQ 3870/75
HP iPAQ 3970/75
h4100
h4300
Desktop or Laptop PC system requirements include:
Microsoft®Windows 98, ME, 2000 Professional, or XP operating system.
266 MHZ Intel Pentium®II microprocessor with MMX™or equivalent.
64 MB RAM.
80 MB available hard drive space.
CD ROM drive.
Handheld PC system requirements include:
Microsoft®Windows Pocket PC 2002 or Microsoft Windows Mobile 2003 Operating Sys-
tem.
64 MB RAM.
64 MB storage space on SD card, CF card, or main memory.

Loading the Navigation System Software
User’s Guide 1-4
Loading the Navigation System Software
To install the Navigation System Software on your Desktop:
1. Synchronize the iPAQ PocketPC with your computer using ActiveSync.
2. Connect the iPAQ PocketPC to your computer using the iPAQ cradle or synchronization cable.
3. Close all other applications running on the Desktop and Pocket PC.
4. Obtain the two Navigation System installation discs.
5. Insert Disk 1 in the CD drive.
6. Click on the Next button on the Welcome to Install Shield Wizard window.
7. Click on the Yes button if you accept the License Agreement terms.
Setup installs the Navigation System files onto your computer.
8. Click on the Finish button.
For information on synchronizing your PC, refer to the iPAQ User’s Guide.
The Installer should start immediately. If the setup program does not auto-
matically start, click on the Start tab and select the Run option. Type the fol-
lowing in the dialog box: D:\setup.exe and click on the OK button. Follow
the directions in the dialog boxes.
Read through the End User License Agreement.

Loading the Navigation System Software
Selecting and Downloading a Map by Region
User’s Guide 1-5
Selecting and Downloading a Map by Region
On the Map Loader window,
1. Click on each state to download to your iPAQ PocketPC, or click on the check box next to
each state name.
2. Select Pocket PC Main Memory from the Target Location pop up box.
3. Click on the Generate Map button.
4. Insert the appropriate disk in the CD drive, when prompted.
5. Click on the OK button after the map is downloaded onto your iPAQ PocketPC.
6. Remove the disk from the CD drive.
The Navigation System allows you to install maps by region/state, or by city.
You can not store multiple cities, or cities and states in the same location.
A region consists of one or more states. Each selected state is highlighted on
the map. A check mark is entered next to each state name on the right side of
the window. You deselect a state by tapping on it on the map, or by tapping
on the box to remove the checkmark. The size of the selected region appears
in the Selected Size box.
The default target location for maps is the Pocket PC main memory. If there
is an SD or CF card installed in your Pocket PC, you can select this as the tar-
get location for maps.

Loading the Navigation System Software
Selecting and Downloading a Map By City
User’s Guide 1-6
Selecting and Downloading a Map By City
On the Map Loader window,
1. Click on the By City tab for the options to create a map around a city.
2. Enter a state in the Region box. Click on the down arrow next to the box to display a list of
states.
3. Enter a city in the City box. Click on the down arrow next to the box to display a list of cities.
4. Click on the bar in the Map Radius box to enter a radius for the selected city.
5. Select Pocket PC Main Memory from the Target Location pop up box.
6. Click on the Generate Map button.
7. Insert the appropriate disk when prompted.
8. Click on the OK button after the map is downloaded onto your iPAQ PocketPC.
9. Remove the disk from the CD drive.
Selecting a map by radius around a city is preferred since it lets you create a
customized map using a small amount of memory. This is helpful if you do
not have additional removable storage cards.
You can increase the radius from 25 miles to 125 miles by moving the indica-
tor to the right. A message displays if the selected map size exceeds the iPAQ
available memory.

Loading the Navigation System Software
Downloading Additional Maps
User’s Guide 1-7
Downloading Additional Maps
The Navigation System easily lets you change map information stored on your iPAQ PocketPC or
removable storage cards.
To access the map installer after Navigation System is installed on your Desktop and iPAQ Pock-
etPC, do the following:
1. Connect the iPAQ PocketPC to your Desktop.
2. Double click the Navigation system icon on your Desktop screen.
The Map Loader screen is displayed.
3. Select a download method, as follows:
By State - Click on each state to download, or click the check box next to each state name
For more information, refer to the Downloading a Map by Region section.
By City - Enter the State, City, and radius around the selected city. For more information,
refer to the Downloading a Map by City section.
The selected state or city size displays in the Selected Size box on the Map Loader screen.
4. Select the storage location (i.e., iPAQ Pocket PC Main Memory or SD Card) from the Target
Location pop up box on the Map loader screen.
5. Click on the Generate Map button.
CAUTION: If you install additional maps, Navigation System warns that any existing
map information is erased from the storage location. This is to prevent the maps
from occupying a considerable amount of storage space.
If you need to store a number of maps, you can use different removable SD or CF
cards.
CAUTION: Verify the Navigation System is closed before installing additional maps.
For more information refer to the Closing the Navigation System section.
If you accept the removal of existing maps, the new selected map(s) are
downloaded to your iPAQ PocketPC.

Closing the Navigation System
Downloading Additional Maps
User’s Guide 1-8
Closing the Navigation System
When you open Navigation System, it runs in the background of your iPAQ PocketPC. To stop it
from running in the background, you should manually close it.
To manually close Navigation System:
1. Tap the blue x in the upper right corner of the map.
2. Tap Start >Settings.
3. Tap the System tab at the bottom of the screen.
4. Tap the Memory icon on the System screen.
The Memory screen displays.
5. Tap the Running Programs tab at the bottom of the Memory screen.
The Running Programs list displays.
6. Tap iPAQ Navigation System in the list.
7. Tap the Stop button.
8. Close your iPAQ PocketPC.
If you do not manually close Navigation System, your iPAQ PocketPC may
freeze when it is switched off. You must perform a soft reset before you can
switch the iPAQ PocketPC on, again. This procedure does not harm any data
or settings.

Learning About Bluetooth GPS Features
User’s Guide 2-1
Using the HP iPAQ GPS Bluetooth Receiver
The HP iPAQ Navigation System Bluetooth GPS receiver gets GPS signals from satellites orbiting
the earth. It identifies your position to an accuracy of less than 10 meters.
Learning About Bluetooth GPS Features
An illustration of the Bluetooth GPS receiver with features follows.
The HP iPAQ Navigation System Bluetooth GPS receiver is referred to as
the Bluetooth GPS receiver in this User’s Guide.
Feature Description
Power Switch Power is On or Off.
Power Jack The Power Jack connects a DC car power charger (included) or
AC power charger to recharge the internal battery.
Bluetooth Status
LED (Blue) Blinking Slowly - There is not a Bluetooth connection. Blinking Quickly - There is a connection to another Bluetooth
receiver.
GPS Status LED
(Green) Blinking - The GPS position is fixed. Steady Light - The GPS position is not fixed.
Battery Status LED
(Red/Yellow) Red - Battery power is extremely low. Charge immediately. Yellow - Battery is currently charging.
LED Off - Battery is partially or fully charged.
External Antenna Connects an external antenna. This is usually not required since
the GPS has an internal antenna.
Power Jack
External Antenna

Setting Up the Bluetooth GPS Receiver
User’s Guide 2-2
Setting Up the Bluetooth GPS Receiver
The Navigation System requires set up with the Bluetooth GPS receiver in order to operate. For the
initial set up, do the following:
1. Charge the Bluetooth GPS receiver using the DC adapter (included) or the AC adapter for the
HP iPAQ PocketPC.
2. Turn on the Bluetooth GPS receiver using the Power switch on the left side of the receiver.
3. Partner the Bluetooth GPS receiver with the iPAQ PocketPC, as follows:
nTapStart at the top of the Today screen of the iPAQ PocketPC.
nTapPrograms on the Start menu.
4. Tap the iPAQ Navigation System icon on the Programs screen.
The following warning displays:
5. Tap on the I Accept button.
The first time you charge the Bluetooth GPS receiver, it can take up to three
hours.
The blue LED flashes when the receiver is turned on.
This is a one time procedure. After this, you just tap the Navigation Sys-
tem icon at the top of the Start menu.

Setting Up the Bluetooth GPS Receiver
Manually Partnering for Windows® Mobile 2002 Operating System
User’s Guide 2-3
Partnering between the Bluetooth GPS receiver and the iPAQ PocketPC automatically occurs.
Manually Partnering for Windows®Mobile 2002 Operating System
To partner the Bluetooth GPS receiver with the iPAQ PocketPC requires:
Navigation System software installed on your iPAQ PocketPC.
Bluetooth GPS receiver is charged.
iPAQ PocketPC is turned on.
Bluetooth GPS receiver is turned on.
Bluetooth GPS receiver and iPAQ PocketPC are between 5-10 meters apart.
Establishing a Connection
1. Tap Start at the top of the Today screen on the iPAQ PocketPC.
2. Tap Bluetooth Manager from the pop up menu.
The Bluetooth Manager screen displays.
3. Tap the Yes tab to search for devices.
Some devices require you manually partner the Bluetooth GPS receiver and
the iPAQ PocketPC. This includes devices using Microsoft®Windows
Pocket PC 2002 operating system. For more information, refer to the Manu-
ally Partnering the Bluetooth GPS Receiver and the iPAQ PocketPC section.
iPAQ searches for and displays a list of Bluetooth devices.

Setting Up the Bluetooth GPS Receiver
Establishing a Connection
User’s Guide 2-4
4. Tap the check box to the left of the BT-GPS-xxxxxx device in the list.
5. Tap the OK button on the upper right side of the screen.
6. Tap and hold the pointer on the BT-GPSxxxxxx icon.
7. Tap on Connect to Serial xxxxxx to establish a connection with the Bluetooth GPS receiver.
A Bluetooth GPS icon displays on the Bluetooth Manager screen.

Setting Up the Bluetooth GPS Receiver
Manually Partnering for Windows® Mobile 2003 Operating System
User’s Guide 2-5
Partnering between the Bluetooth GPS receiver and the iPAQ PocketPC immediately occurs.
Manually Partnering for Windows®Mobile 2003 Operating System
To partner the Bluetooth receiver with the iPAQ PocketPC requires:
Navigation System Software installed on your iPAQ PocketPC.
Bluetooth GPS Receiver is charged.
iPAQ PocketPC is turned on.
Bluetooth GPS Receiver is turned on.
Bluetooth GPS receiver and iPAQ PocketPC are between 5-10 meters of each other.
Establishing a Connection
1. Tap Start at the top of the Today screen on the iPAQ PocketPC.
2. Tap the Settings option on the pop up menu.
3. Tap the System tab at the bottom of the Settings menu.
4. Tap the Bluetooth icon on the System menu.
The Bluetooth General screen displays.
Two blue arrows display on the GPS Bluetooth receiver icon to indicate a
connection.

Setting Up the Bluetooth GPS Receiver
Establishing a Connection
User’s Guide 2-6
5. Tap the Turn On tab below the Bluetooth status.
6. Tap Bluetooth Manager to set the connections.
The Bluetooth screen displays.
The message “Bluetooth is On” displays.

Setting Up the Bluetooth GPS Receiver
Establishing a Connection
User’s Guide 2-7
7. Tap the New tab at the bottom of the Bluetooth screen.
8. Tap Connect! to display the Connection Wizard.
9. Tap Explore a Bluetooth Device from the Connection Wizard options.
10. Tap the Next tab at the bottom of the Connection Wizard screen
11. Tap inside the Device box to display a list of available Bluetooth Devices.
12. Tap the icon labeled BT-GPS-XXXXXX.
13. Tap Serial XXXXXX on the Service Selection screen to highlight it.
14. Tap the Next tab at the bottom of the Service Selection screen.
15. Tap the Finish tab at the bottom of the Connection Wizard screen.
16. Tap the BT-GPS-XXXXXX icon, twice, to establish a connection between the iPAQ Pock-
etPC and the Bluetooth GPS receiver.
Green arrows on the icon indicate an active connection.
The Bluetooth GPS receiver displays a list of available devices. This creates a
shortcut for the GPS receiver
A box with the connections displays.