Acrosser Technology AR-R8601 User manual

Revision: 1.0
Revision Description Date
1.0 Release 2012/3/27
AR-R8601
Installation Guide
1

Revision: 1.0
2
Contents
1 ...............................................................................................3Introduction to AR-R8601
1.1 ..........................................................................................................3Specifications
1.2 Packing List............................................................................................................4
1.3 System Dissection..................................................................................................4
2 Procedures of Assembly/Disassembly.........................................................................7
2.1 Installing the CF card…………………………………………………………………….7

Revision: 1.0
1 Introduction to AR-R8601
Acrosser's Rackmount Networking device AR-R8601 is a cost-effective and entry-level
solution, which is suitable for small office. Base on VIA CN700 with ULV Eden 1600MHz
CPU, the AR-R8601 general very low heat. We also put a quiet Fan to keep the low noise
which will not cause uncomfortable voice. By three 10/100 Lans, the AR-R8601 is sufficient
for the small business security hardware solution.
Key features:
1. VIA EDEN ULV 1600 CPU.
2. VIA CN700+8237R plus Chipsets.
3. DDRII memory support (667MHz).
4. 3 x 10/100LAN RTL8100C.
5. CF socket, SATA x 1, SATA power, USB x 2.
6. Console, VGA (pinhead), KB/MS (Pinhead).
7. Support PXE boot from LAN.
8. Compact size.
1.1 Specifications
Item Description
System AR-R8601
CPU Board AR-B8601E16
System
Dimensions 440*189.5*44(mm)
3

Revision: 1.0
1.2 Packing List
Description Quantity
AR-R8601 1
Console cable 1
Software driver CD 1
Quick user’s manual 1
Power cord 1
1.3 System Dissection
(1)Dimensions
4

Revision: 1.0
(2)Front Panel
USB*2 LAN1~3 COM PORT
Back Panel
FAN
SWITCHPOWER
5

Revision: 1.0
(3)System Configuration
Item Description Quantity
1 TOP COVER 1
2 RAM SOCKET 1
3 CF SOCKET 1
4 POWER 1
5 BOTTOM BASE 1
6 FAN 1
6

Revision: 1.0
2Procedures of Assembly/Disassembly
2.1 Installing the CF card.
1. Unfasten two screws of chassis top cover and open it.
Unscrew Unscrew
Unscrew two screws of chassis top cover
(c) Open chassis top cover
7

Revision: 1.0
8
2. Insert the CF card into the CF socket.
3. Finally, assemble the top cover and fasten it with screws.