Data Video SE-2200 User manual

SE-2200
HD/SD 6-CHANNEL
DIGITAL VIDEO SWITCHER
Instruction manual

2
Table of Contents
FCC COMPLIANCE STATEMENT ..................................................................................................... 4
WARNINGS AND PRECAUTIONS.................................................................................................... 4
WARRANTY .................................................................................................................................. 5
STANDARD WARRANTY ............................................................................................................................. 5
THREE YEAR WARRANTY ........................................................................................................................... 5
DISPOSAL ..................................................................................................................................... 5
CONNECTIONS AND CONTROLS .................................................................................................... 6
CONNECTING THE SE-2200 MAIN UNIT TO THE CONTROL PANEL ..................................................................... 6
MAIN UNIT –FRONT PANEL ...................................................................................................................... 6
MAIN UNIT -REAR PANEL ......................................................................................................................... 7
Rear Panel Connections.................................................................................................................. 7
CONTROL PANEL OVERVIEW .................................................................................................................... 10
Keyboard Controls ........................................................................................................................ 11
MENU OPTIONS ......................................................................................................................... 18
MULTI SCREEN MODES ............................................................................................................... 20
SE-2200 VIDEO LAYERS ............................................................................................................... 21
PICTURE IN PICTURE FUNCTION .................................................................................................. 22
PIPSETTINGS ........................................................................................................................................ 22
PIP PRESET AND PIP PROGRAM................................................................................................................ 22
ASSIGNING A VIDEO SOURCE INPUT TO A PIP................................................................................................ 22
DSK FUNCTION ........................................................................................................................... 24
DSK SETTINGS....................................................................................................................................... 24
DSK PVW AND DSK PGM ..................................................................................................................... 24
ASSIGNING AN INPUT TO THE DSK PVW CHANNEL FOR KEYING ....................................................................... 24
TC-200 MODE & CG-200 OVERLAY INPUT FROM A LAPTOP.......................................................... 25
AUDIO FUNCTION....................................................................................................................... 26
OVERVIEW............................................................................................................................................ 26
AUDIO FOLLOW VIDEO ..................................................................................................................... 26
AUDIO FIXED ..................................................................................................................................... 27
AUDIO MENU OPTIONS –DE-EMBEDDING SDI OR HDMI AUDIO .................................................................... 27
WORKING WITH A FIXED OR SINGLE AUDIO SOURCE........................................................................................ 28
SWITCHING BETWEEN DIFFERENT EMBEDDED AUDIO SOURCES ......................................................................... 29
HOW TO RE-CALIBRATE THE SE-2200 T-BAR................................................................................. 31
GPI CONNECTIONS...................................................................................................................... 32
SE-2200 TALLY OUTPUTS ............................................................................................................. 33
EXAMPLE SE-2200 SET UP............................................................................................................ 34
DIMENSIONS .............................................................................................................................. 35
SPECIFICATION ........................................................................................................................... 36
SERVICE & SUPPORT................................................................................................................... 38

3
Disclaimer of Product & Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will
try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some
information in this manual, from time to time, may not be correct or may be incomplete. This manual may contain
typing errors, omissions or incorrect information. Datavideo Technologies always recommend that you double check the
information in this document for accuracy before making any purchase decision or using the product. Datavideo
Technologies is not responsible for any omissions or errors, or for any subsequent loss or damage caused by using the
information contained within this manual. Further advice on the content of this manual or on the product can be
obtained by contacting your local Datavideo Office or dealer.

4
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious
damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure
safe and reliable operation of this unit, and to protect it from overheating, do not block or cover
these openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation
openings on the bottom of the cabinet will be blocked. This unit should never be placed near or
over a heat register or radiator. This unit should not be placed in a built-in installation unless
proper ventilation is provided.
7. This product should only be operated from the type of power source indicated on the marking
label of the AC adapter. If you are not sure of the type of power available, consult your
Datavideo dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord
will be walked on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings
on the products plugged into the extension cord do not exceed the extension cord rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not
exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may
touch dangerous voltage points or short out parts that could result in risk of fire or electric
shock. Never spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this product
yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to
dangerous voltage points or other risks, and will void your warranty. Refer all service issues to
qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under the
following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust
only those controls that are covered by the operating instructions in this manual; improper
adjustment of other controls may result in damage to the unit and may often require
extensive work by a qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.

5
Warranty
Standard Warranty
•Datavideo equipment are guaranteed against any manufacturing defects for one year from
the date of purchase.
•The original purchase invoice or other documentary evidence should be supplied at the time
of any request for repair under warranty.
•The product warranty period beings on the purchase date. If the purchase date is unknown,
the product warranty period begins on the thirtieth day after shipment from a Datavideo
office.
•Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered
under warranty.
•Viruses and malware infections on the computer systems are not covered under warranty.
•Any errors that are caused by unauthorized third-party software installations, which are not
required by our computer systems, are not covered under warranty.
•All mail or transportation costs including insurance are at the expense of the owner.
•All other claims of any nature are not covered.
•Cables and batteries are not covered under warranty.
•Warranty only valid in the country or region of purchase.
•Your statutory rights are not affected.
Three Year Warranty
•All Datavideo products purchased after July 1st, 2017 are qualified for a free
two years extension to the standard warranty, providing the product is
registered with Datavideo within 30 days of purchase.
•Certain parts with limited lifetime expectancy such as LCD panels, DVD drives, Hard Drive,
Solid State Drive, SD Card, USB Thumb Drive, Lighting, Camera module, PCIe Card are
covered for 1 year.
•The three-year warranty must be registered on Datavideo's official website or with your local
Datavideo office or one of its authorized distributors within 30 days of purchase.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product or on its packaging indicates that this product must not
be disposed of with your other household waste. Instead, it is your responsibility
to dispose of your waste equipment by handing it over to a designated collection
point for the recycling of waste electrical and electronic equipment. The separate
collection and recycling of your waste equipment at the time of disposal will help
to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment. For more information about where you can drop off
your waste equipment for recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
CE Marking is the symbol as shown on the left of this page. The letters "CE" are
the abbreviation of French phrase "Conformité Européene" which literally means
"European Conformity". The term initially used was "EC Mark" and it was officially
replaced by "CE Marking" in the Directive 93/68/EEC in 1993. "CE Marking" is now
used in all EU official documents.

6
Connections and Controls
Connecting the SE-2200 Main Unit to the Control Panel
Use D-SUB Cable to connect SE-2200 main unit to SE-2200 control unit.
SE-2200 Control Panel
SE-2200 Main Unit
Main Unit – Front Panel
The front panel on the SE-2200 main unit has a grille for airflow cooling fans. Please do not block
or cover this grille as the unit may overheat. This grille should also be kept free of dust. The front
panel can be removed by using the four thumbscrews. A soft brush or cloth can then be used to
clean the grille before attaching it back to the unit.
The power button starts and shuts down both the SE-2200 main unit and its attached keyboard.
D-Sub

7
Main Unit - Rear Panel
1. Video Input 1~4 – HD-SDI 9. Grounding Terminal
2. Tally Output Connector 10. 4pin XLR Power Input Connector (12V)
3. Connect the SE-2200 Keyboard 11. Mini Switch 2
4. Ethernet Port for external Control (PC) 12. Service Port - Load FS file & Firmware
Updates
5. RS-232/422 Connector & Mini Switch 1 (TBD) 13. Multi View Outputs – HDMI
6. GPI Output Connector 14. Video Output 1~6 – HD-SDI
7. 3pin XLR Audio Inputs 1~4 15. Input 6 – HD-SDI / HDMI (User Defined)
8. 3pin XLR Audio Outputs 1 / 2 16. Input 5 – HD-SDI / HDMI (User Defined)
Rear Panel Connections
Video Inputs
The SE-2200 can be supplied with up to six video input
channels.
The SE-2200 has six BNC input connectors and two
input HDMI ports. Input channels 5 and 6 are optionally
set up either as BNC SDI or HDMI.
Note: Please enter the SE-2200 MENU
system and
select INPUT 5 AND 6 MODE to choose the required
input connection.

8
Tally Output
The SE-2200 Tally Output port provides bi-colour tally
information to a number of other Datavideo products,
such as the ITC-100 eight channel talkback system or
the Datavideo TLM range of monitors.
Console Port
This 9pin D-Sub connector is used to connect the
Control Panel / Keyboard to the rear of the SE-2200
Main Processing unit.
Ethernet Port
For external PC control only
RS-232 / RS-422 Remote
This port is not active under current firmware.
GPI
The GPI socket can be used for simple external control.
Note: Please enter the SE-2200 MENU
system and
select GPI SETTINGS to set up the
required GPI
connection.
AUDIO Inputs
Supports four channels XLR Balanced Audio
Input for
embedding.
AUDIO Outputs
Supports two channels XLR Balanced Audio output.
(de-
embedded audio from any of the digital video
sources)

9
Grounding Terminal
When connecting this unit to any other component,
make sure that it is properly grounded by connecting
this terminal to an appropriate point. When
connecting, use the socket and be sure to use wire with
a cross-sectional area of at least 1.0 mm2.
DC Input
Connect the supplied 12V 3A PSU to this 4pin XLR
socket.
Pin 1 = GND ( - )
Pin 2 = NC
Pin 3 = NC
Pin 4 = VCC ( + )
Mini Switch 2
For firmware upgrades, switch both switches to the
upper position.
For Fast Start, please select lower position.
Service Port
This RJ45 Ethernet port is used to update the SE-2200
firmware, or upload logos and images using the
SEConfig software.
SDI Video Outputs
The six BNC output connectors are user defined SDI
outputs. Each of these SDI outputs has the option to be:
1. Program
2. Program logo free
3. Program logo & titles free
4. Preview
5. Aux1, 2, 3 or 4
6. Multi screen
Note: Please enter the SE-2200 MENU and select
OUTPUT SOURCE to set the output source.

10
HDMI Multi-View Outputs
SE-2200 Multi-view monitoring is available across two
HDMI monitors. These HDMI outputs can be used to
monitor video and audio in a number of different
configurations.
This Multi-view is supplied from the HDMI connection(s)
on the rear panel. When connected to two compatible
HDMI monitors a variety of multi-
image layouts is
possible.
Note: HDMI multi-view output is 1080i. Note that both
HDMI outputs are Identical (cloned).
Control Panel Overview
1. HDMI Multi Screen [MSCR] or Program
[PGM]
2. PC Control
3. Audio Fixed
4. Cross Point Video, Audio, Frame Store [FS] &
Aux
5. Audio Follows Video
6. Menu access

11
7. Wipe Transition Selection
8. Function Keys F1~F4
9. PIP Selection Preview [PVW] & Program
[PGM]
10.DSK Selection Preview [PVW] & Program
[PGM]
11.Logos 1 & 2 and clock selection
12.Fade to Black [FTB]
13.Speed Selection [Auto Take Transitions]
14.Wipe Function
15.CUT & AUTO TAKE
16.Mix / Dissolve Function
17.Freeze Function
18.T-Bar – Manual Transitions
19.Program row – On Air
20.Preset Row – Preview / Next source
21.Timer Function – Multi view only
Keyboard Controls
Program and Preset rows
The Program row of buttons is the active channel, this is the live output. The active channel
will appear as the Program Output. You can switch or CUT from one video source to another
directly on the Program row. You will see the multi view Program output change as you press
different keys along this top row of buttons.
The Preset row is the cued channel; this channel will appear in the Preview window. The Preset row
selection decides which input will be transitioned next when using any of the transition controls.
BK
Black background – the black background, for use on the
Program and Preset row.
BG
Background button – assigns a background colour or colour
bars for use on the Program and Preset row.
Note: Please enter the SE-2200 MENU and select CONSOLE
SETTINGS to set the background colour.

12
MSCR/PGM
Switch HDMI outputs between Multi Screen [MSCR] view
and Program [PGM] view.
PC Control
Press this key, to allow a computer to remotely control the
SE-2200, or when using the supplied SEConfig software to
load Frame Store [FS] stills and Logos.
Audio Fixed
For more detail, please see the AUDIO FIXED section.
FS – Frame Store Button
The SE-2200 CH1~6 video channels, each of these channels
has its own Frame Store. Each of these Frame Stores can
hold one still image. This still image can be called into the
production by using the FS button located at the top left
corner of the SE-2200 Control Panel / Keyboard. The FS
button allows the user to toggle between the still image of
the Frame Store or the live video input also connected to
that same video channel.
How to choose live video input or Frame Store
1. First press and hold down the FS button. The Preset row of input sources will light.
2. While still holding down the FS button, press the required input on the Preset row.
3. The input button will flash to confirm the Frame Store is selected.
The contents of each Frame Store are uploaded to the SE-2200 from a PC.
The supplied SEConfig software is used to do this.
This selection will also be confirmed on the HDMI Multi-view, with the selected channel showing
the live input or frame store image.
AUX Source Selection
The SE-2200 has four user defined AUX SDI outputs; one or
all of these outputs can be set up as an auxiliary (AUX)
output via a menu option.
The AUX output source can be quickly selected in the
following way.
1. First press and hold down the AUX button. The Program
row of input sources will light.

13
2. While still holding down the AUX button, press the required input on the Program row*. The
Preset row of input sources will light.
3. While still holding down the AUX button, press the required input on the Preset row.
4. The input button will flash to confirm the AUX source is selected.
*Repeat this for the other aux output if required.
XPT Video
Assigning video source, channel setting depended on your selection.
The XPT Video source can be quickly selected in the following way.
1. First press and hold down the XPT VIDEO button. The Program row of input sources will light.
2. While still holding down this XPT VIDEO button, press the required input on the Program
row. The Preset row of input sources will light.
3. While still holding down the XPT VIDEO button, press the required input on the Preset row.
4. The input button will flash to confirm the video source is selected.
XPT Audio
Assigning audio source, channel setting depended on your selection.
The XPT Audio source can be quickly selected in the following way.
1. First press and hold down the XPT AUDIO button. The Program row of input sources will light.
2. While still holding down this XPT AUDIO button, press the required input on the Program
row. The Preset row of input sources will light.
3. While still holding down the XPT AUDIO button, press the required input on the Preset row.
4. The input button will flash to confirm the audio source is selected.
Audio Follow Video
For more detail, please see the AUDIO FOLLOW VIDEO
section.
Menu Control
Press the MENU button in the SE-2200 function section to
enter the System Configuration Menu. Press the UP, DOWN,
LEFT, and RIGHT arrow buttons to navigate the menu
options and to change values. Use the ENTER button to save
and confirm any setting that has been amended.

14
WIPES
The SE-2200 has 17 user defined wipe buttons, and a BDR
button.
All wipes can have an optional colour border applied. The
wipe border width and colour are chosen within the menu
system.
Transitions can be performed manually using the T-Bar or
automatically by using the SPEED and AUTO TAKE buttons.
Vertical Wipe Left to Right.
Vertical Wipe Right to Left.
Horizontal Wipe Top to Bottom.
Horizontal Wipe Bottom to Top.
Box Wipe from outside edges to
Centre.
Box Wipe from Centre to outside
edges.
Upper Left corner Wipe to Lower
Right corner
Upper Right corner Wipe to Lower
Left corner
Lower Left corner Wipe to Upper
Right corner
Lower Right corner Wipe to Upper
Left corner
Circle Wipe from Centre to outside
edges
Circle Wipe from outside edges to
Centre
Vertical Wipes from Centre to Left
and Right sides
Vertical Wipes from Left and Right
sides to Centre
Horizontal Wipes from Centre to Top
and Bottom
Horizontal Wipes from Top and
Bottom to Centre
Diamond Wipe from Centre to
outside edges
Border: Enable / Disable wipe border
FUNCTION buttons (F1~F4)
These function buttons are not yet active under the current
firmware.

15
PIP Preview and PIP Program
When looking at the top right corner of the SE-2200 Control
Panel / Keyboard there are four PIP keys. These are
labelled Program and Preview. The upper PIP1 and PIP2
keys relate to activating Picture In Picture images on the
Program outputs. The lower PIP1 and PIP2 keys relate to
activating Picture In Picture images on the Multi-view and
Preview outputs (as well as allowing the assigning of a PIP
source)
For more detail, please see the Picture in Picture Function.
DSK Preview and DSK Program
When looking at the top right corner of the SE-2200 Control
Panel / Keyboard there are two DSK keys. These are
labelled Program and Preview. The upper DSK key relates
to activating Down Stream Keying on the Program outputs.
The lower DSK key relate to activating Down Stream Keying
on the Multi-view or Preview outputs. (as well as allowing
the assigning of the key source)
For more detail, please see the DSK Function.
LOGO 1
The LOGO 1 and LOGO 2 buttons are used to display pre-
selected logos on the SE-2200 Preview and Program
outputs. When the button is active the selected logo is
shown. These logos are selected from the switcher’s
memory and positioned using a menu option.
LOGO 2 or CLOCK
The user cannot display LOGO 2 and CLOCK at the same
time. Instead use LOGO 1 and CLOCK together or use LOGO
1 and LOGO 2 together.
FTB
Fade To Black, this button fades the current video program
source to black. When pressed again it acts in reverse
from complete black to the currently selected program
video source.
SPEED
There are three speed buttons which can be defined by
the user. By pressing a speed button the user is choosing
the rate of transition or time taken when using the AUTO
TAKE button.
Note: Please enter the SE-2200 MENU and select
CONSOLE SETTINGS to set up SPEED BUTTON SETTING.

16
WIPE
The WIPE button is selected when a wipe effect transition
between the selected Program and Preset sources is
required. This WIPE effect is produced by then moving
the T-Bar manually or by pressing the AUTO TRANS button.
CUT
This performs a simple immediate switch from the current
main source to the selected sub source. The selected
transition wipe or MIX is not used.
AUTO TAKE
This performs an automated switch from the current
program source to the selected Preview source. The selected
transition wipe or MIX will also be used. The timing of the
transition is set by the chosen Speed button.
MIX
Pressing this button selects a basic A/B Dissolve for the next
transition.
FREEZE
Freeze the program source image or return to live video
of the selected program source. Press and hold down this
button and the Preset bus will light. While pressing this
button select the desired channel to grab a still or frozen
image.
T-Bar
This performs a manually controlled transition from the
current program source to the selected Preset source. The
selected transition wipe or dissolve will be used. When
the T-Bar has travelled as far as it can go the transition
between sources is complete. The T-Bar has indicators
next to it which light when the transition is complete.
The T-Bar can be operated in one of two modes which
are chosen by a menu option.

17
TIMER
In some mixing or switching applications it is useful to
have a countdown timer. It could be that the input is a
pre-recorded video clip and you need to know when to be
ready to switch away from it.
This countdown timer function is only seen in the status area of the HDMI multi-view output near
the normal Clock function. The timer can be selected for one input channel, several channels or
all channels.
When the TIMER button is active and the user switches to a selected input channel the countdown
starts on the HDMI multi-view.
The value of the countdown is set in Minutes and Seconds (MM:SS). A maximum countdown of
sixty minutes [60:00] is possible. However, the initial default is 15 seconds [00:15].
When the countdown reaches zero, the user must then switch or transition to another input
channel.
The switcher will not automatically change to the
selected Preset source at the end of the
countdown.
How to set up the TIMER Countdown Settings
1. On the switcher’s keyboard, select the video source to be set up for TIMER on the PRESET row.
2. Press the MENU key and select the ON PREVIEW SETTING to find the COUNT DOWN SETTING.
3. Count Down is on can be switched ON or OFF.
4. Count Down Value can be set to the required length of time in Minutes and Seconds [MM:SS].
5. Press the ENTER key to save your chosen settings, and then exit the MENU Mode.
6. Press the TIMER key so it is on
and then transition to the chosen PRESET channel. The
countdown will start in the status area near the clock function.
7. Select the next source that needs to be set up for countdown timer on the PRESET row by
following steps 2 to 6.
Note: The Count Down will only start if the selected Preset and Program sources are different. The
Count Down will not start if Program and Preset sources are both set for the same input.

18
Menu Options
When the ENTER button is pressed the Main Menu list is displayed on the
HDMI 1 Multi-view output.
This section covers the Menu options in the order that they appear on the
SE-2200 HDMI 1 Multi-view. These settings may also appear in more detail
elsewhere in this instruction manual. Options may vary depending on the
firmware version in use.
Once the chosen setting has been confirmed with the ENTER button it
is stored within the switchers non-volatile memory.
* The following menu table applies when the switcher is in HD 1080i mode.
Version No
Where xx.xx is the version number
1
Mode (Video Format)
1080i or 720P
2 On Preview settings
Video input adjustment
Brightness
Range 072 to 184
Contrast
Range 36 to 92
Saturation
Range 36 to 92
Apeture
0~3
Y-C Delay
0~7
Set to Nominal
Reset to default values
Audio input adjustment
Level
-60 ~ +60
Set to Nominal
Tick to reset
Count Down Settings
Count Down is on See Timer section on page
15.
Count Down Value
Value is set in minutes
and seconds [MM:SS]
Default 15 sec or 00:15
Max 1 hour or 60:00
3 Inputs 5 and 6 mode
Input 5
SDI
Tick and enter to select
HDMI
Tick and enter to select
Input 6 HDMI Color Mode
RGB
YUV 422 Tick to select
YUV 444
TC-200 mode
4 Output Sources Output 1~6
User has a choice of:
Program
Program Logo Free
Program Logo & DSK Free
Preview
Aux 1~4
Multi Screen
5
Aux Selection
Aux 1~4
Inputs 1~6
6 Audio Settings
Dynamic Range (dB)
18 or 24
Audio Crosspoints
Input 1~6
Value 1~6
SDI de-embed Audio
Input 1~6
Group 1~4 & Pair 1 or 2
HDMI de-embed Audio
Input 5 or Input 6
Pair 1, 2, 3 or 4
Audio re-embed setup
Output 1~6
Pair 1, 2, 3 or 4
Audio Mixing Type
X type or Y Type
Tick to select
7
PIP Settings
PIP 1
Horizontal Position
000~107

19
PIP 2
Vertical Position
000~108
Window size
01~33
Border Width
00~35
Border Color
01~08
8 Logo Settings Logo 1
Logo 2
Logo Selection
1~8
Horizontal Position
000~110
Vertical Position
000~124
9 Clock Settings
Horizontal Position
000~110
Vertical Position
000~124
Set Hours
00~24
Set Minutes
00~59
Clear seconds
10 DSK Settings
DSK
See DSK section
Luma Key Mode
Luma Key Level
11 Wipe Border Settings Wipe 1~17
Width
0~4
Color
1~8
12 Multi Screen Setup
Multi Screen Mode
Variant A/ B/ C See Multi Screen mode section below
Multi Screen Audio setup Preview/ Program Audio
Audio Level Indicator
ON/ OFF
13 Console Settings
T-Bar Audio Mixing Type
Follow T-Bar / By the END
T-Bar Mode
One way mode / Two way mode
Speed Button Setting
Speed 1/ 2/ 3
4 ~ 64 Frames
BG Button Color
1 ~ 9 where 9 = colour bars
Button Settings
Brightness
000 ~ 004
Backlight is on
On/ Off
1KHz to Bars
On/ Off
14 GPI Settings
Input Select
0 ~ 6
Channel 1~6 0=GPI function disabled
Time Delay
Mode
01 ~ 75
Delay time can be set between 1 ~ 75 frames
Level
Pulse
15 Remote Control
Ethernet
Tick to select
DVIP Board
16
Factory Settings
Tick selection to enable – Reset all menu settings to factory default values

20
Multi Screen modes
The SE-2200 HDMI Multi view outputs can be
configured using menu option 12. Multi Screen
Setup.
Three Multi Screen layouts are available, variant
A, B or C.
This Multi Screen output can also be assigned to
any of the six SDI outputs using menu option 4.
Output Sources.
Multi Screen - Variant A
Multi Screen - Variant B
Multi Screen - Variant C