ACU-RITE Intelli-Time 75173 User manual

Instruction Manual
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Questions? Contact Customer Support at
www.AcuRite.com/support or email [e-mail]
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets................. 3
Clock Setup........................... 4
Intelli-Time®Clock .................. 4
Set the Time & Date ............... 5
Using the Clock...................... 5
Troubleshooting ..................... 5
Care & Maintenance.............. 6
Replace Intelli-Time®Battery ... 6
Specications......................... 6
FCC Information .................... 6
Customer Support .................. 7
Warranty............................... 7
Intelli-Time®Digital Clock
model 75173

2
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Digital clock
2. Instruction Manual
PRODUCT REGISTRATION
Register online to receive 1-year warranty protection
www.AcuRite.com/product-registration
IMPORTANT PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

3
Features & Benets
1 2 3 4
5 5 56 7 8 9 10
12 1311 1414
1. Intelli-Time®Clock
2. AM/PM Indicator
3. Time Zone Indicator
4. Daylight Saving Time Indicator
5. Integrated Hang Hole
For easy wall mounting.
6. SET Button
7. UP Button
8. DOWN Button
9. TIME ZONE Button
10. RESET Button
Full reset to factory defaults
11. DST OLD/NEW/OFF Switch
for DST setup preferences.
12. Battery Compartment
13. Intelli-Time®Battery
Compartment
14. Fold-Out Stands

4
SETUP
Install or Replace Batteries
4 AA alkaline batteries
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
Install or Replace Batteries
1. Remove the battery compartment cover.
2. Insert 4 x AA alkaline batteries into the battery compartment, as shown.
Follow the polarity (+/-) diagram in the battery compartment.
3. Replace the battery cover.
Intelli-Time®Clock
Intelli-Time clock and calendar are pre-programmed to the correct time and
date, and update automatically for Daylight Saving Time. All you need to do is
select your time zone using the “TIME ZONE” button.

5
OPERATION
Set the Time & Date
Set the time zone (HAST, AKST, PST, MST, CST, EST, AST) by pressing the
“TIME ZONE” button, located on the back of the clock. The Time Zone
selected is indicated on the clock display.
Set the Daylight Saving Time preference (NEW, OLD, OFF) using the DST
switch, located on the back of the clock. If you live in an area that observes
Daylight Saving Time, DST should be set to "NEW", even if it is not currently
Daylight Saving Time. While DST is being observed, "Daylight ST" is indicated
on the clock display.
Press and hold the “SET” button for 3 seconds to enter SET MODE. Once in
SET MODE the preference you are currently setting will blink on the clock.
To adjust the currently selected (ashing) item, press and release the “UP” or
“DOWN“ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the "SET" button to adjust the next
preference. The preference order is as follows:
CLOCK HOUR (Please note AM/PM indicator)
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
You will automatically exit SET MODE if no buttons are pressed for 15 seconds.
Enter SET MODE any time by pressing and holding "SET" button for 3 seconds.
Using the Digital Clock
To view the MONTH/DATE/YEAR, press and release the "SET" button. Press
"SET" button again to display time. If no buttons are pressed after 15 seconds
the display will automatically display time again.
Troubleshooting
Clock is too dark,
hard to read or
doesn’t work
• Reset the unit by pressing the reset button located on the
back of the clock. This will reset the clock to the original
factory settings. Time and date will need to be entered
after a reset.
If your AcuRite product does not operate properly after trying
the troubleshooting steps, contact Customer Support at
www.AcuRite.com/support or email [e-mail].

6
Care & Maintenance
Clock Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Replace Intelli-Time Clock Battery
Intelli-Time technology is powered
by a pre-installed coin-cell battery
that stores the time and date
settings. The battery has a shelf
life of several years. Time and
date will need to be entered after
replacing Intelli-Time battery. To
replace the Intelli-Time battery:
1. Locate the coin cell battery
compartment door inside the
battery compartment of the clock.
Unscrew and remove the compartment cover.
2. Insert 1 x CR2032 coin cell battery into the battery compartment, as shown.
Install battery with “+” positive terminal facing right.
3. Screw in the battery cover.
Specications
POWER 4 x AA alkaline batteries (not included)
1 x CR2032 coin cell battery (included)
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against htarmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.
Such modications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).

7
Customer Support
AcuRite customer support is committed to providing you with best-in-
class service. For assistance, please have the model number of this
product available and contact us in any of the following ways:
Visit us at www.AcuRite.com
► Installation Videos ► Register your Product
► Instruction Manuals ► Support User Forum
► Replacement Parts ► Submit Feedback & Ideas
AcuRite is a wholly owned subsidiary of Chaney
Instrument Company. For purchases of AcuRite products,
AcuRite provides the benets and services set forth herein.
For purchases of Chaney products, Chaney provides the
benets and services set forth herein.We warrant that all
products we manufacture under this warranty are of good
material and workmanship and, when properly installed
and operated, will be free of defects for a period of one
year from the date of purchase.
Any product which, under normal use and service, is
proven to breach the warranty contained herein within
ONE YEAR from date of sale will, upon examination by
us, and at our sole option, be repaired or replaced by
us. Transportation costs and charges for returned goods
shall be paid for by the purchaser. We hereby disclaim all
responsibility for such transportation costs and charges.
This warranty will not be breached, and we will give no
credit for products which have received normal wear and
tear not affecting the functionality of the product, been
damaged (including by acts of nature), tampered, abused,
improperly installed, or repaired or altered by others than
our authorized representatives.
Remedy for breach of this warranty is limited to repair
or replacement of the defective item(s). If we determine
that repair or replacement is not feasible, we may, at our
option, refund the amount of the original purchase price.
THE ABOVE-DESCRIBED WARRANTY IS THE SOLE
WARRANTY FOR THE PRODUCTS AND IS EXPRESSLY
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED. ALL OTHER WARRANTIES OTHER THAN
THE EXPRESS WARRANTY SET FORTH HEREIN ARE
HEREBY EXPRESSLY DISCLAIMED, INCLUDING
WITHOUT LIMITATION THE IMPLIED WARRANTY OF
MERCHANTABILITY AND THE IMPLIED WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE.
We expressly disclaim all liability for special, consequential,
or incidental damages, whether arising in tort or by
contract from any breach of this warranty. Some states
do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or
exclusion may not apply to you.
We further disclaim liability from personal injury relating
to its products to the extent permitted by law. By
acceptance of any of our products, the purchaser assumes
all liability for the consequences arising from their use or
misuse. No person, rm or corporation is authorized to
bind us to any other obligation or liability in connection
with the sale of our products. Furthermore, no person, rm
or corporation is authorized to modify or waive the terms
of this warranty unless done in writing and signed by a
duly authorized agent of ours.
In no case shall our liability for any claim relating to our
products, your purchase or your use thereof, exceed the
original purchase price paid for the product.
Applicability of Policy
This Return, Refund, and Warranty Policy applies only to
purchases made in the United States and Canada. For
purchases made in a country other than the United States
or Canada, please consult the policies applicable to the
country in which you made your purchase. Additionally,
this Policy applies only to the original purchaser of our
products. We do cannot and do not offer any return,
refund, or warranty services if you buy products used or
from resale sites such as eBay or Craigslist.
Governing Law
This Return, Refund, and Warranty Policy is governed by
the laws of the United States and the State of Wisconsin.
Any dispute relating to this Policy shall be brought
exclusively in the federal or State courts having jurisdiction
in Walworth County, Wisconsin; and purchaser consents
to jurisdiction within the State of Wisconsin.
Limited 1-Year Warranty
[e-mail]
PRODUCT REGISTRATION
Register online to receive 1-year warranty protection
www.AcuRite.com/product-registration
IMPORTANT PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of
the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and
copyrights are the property of their respective owners. AcuRite uses patented
technology. Visit www.AcuRite.com/patents for details.
Printed in China
75173 INST 110920
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments,
designed to provide you with information you can depend on to
Plan your day with condence™.
www.AcuRite.com