ACU-RITE 00621 User manual

OUTDOOR
911
~
-~
i iii
FUTURE FORECAST
.,o ... .. -) ♦ ♦.., ~ Ji ,t
=~ ::
... "'
.) ---.
,QI,- • - -- 411,
.IJI- ------ ••J'
- -------·
...,. ............. Joi
PRESSURE HISTORV
'40f.llttl "'00
Ill
Instruction Manual
Weather Forecaster
model 00621
CONTENTS
Unpacking Instructions ........... 2
Package Contents .................. 2
Product Registration ............... 2
Features & Benets: Sensor..... 2
Features & Benets: Display.... 3
Setup .................................... 4
Sensor Setup ......................... 4
Display Setup ........................ 4
Intelli-Time® Clock .................. 5
Set the Time, Date & Units ...... 5
Placement Guidelines ............. 6
Using the Forecaster............... 7
Troubleshooting ..................... 8
Care & Maintenance.............. 9
Replace Intelli-Time® battery ... 9
Specications........................10
FCC Information ...................10
Customer Support .................11
Warranty..............................11
Questions? Contact Customer Support at
[phone] or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.

Archive:l Products
II
Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety
and retain it for future reference.
Unpacking Instructions
Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.
Package Contents
1. Display unit
2. Outdoor sensor
3. Instruction Manual
IMPORTANT PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
►
Register a Product
Features & Benets
1 OUTDOOR SENSOR
1. Integrated Hanger
2 For easy placement.
2. Wireless Signal Indicator
Flashes when data is being sent to the
display unit.
3. Battery Compartment
3 4. Battery Compartment Cover
4
2

Features & Benets 3 2 1 12
DISPLAY UNIT
1. 12 to 24 Hour 4
Weather Forecast
Self-Calibrating Forecasting
pulls data from the outdoor 5
sensor to generate your
personal forecast. 6
2. Learning Mode Icon
Disappears after weather
forecast self-calibration is
complete.
3. Sensor Low Battery Indicator
4. Current Outdoor Temperature
5. Outdoor Sensor Signal Strength
6. Moon Phase
7. Pressure History Graph
Tracks and displays the barometric
pressure history.
8. Current Barometric Pressure
BACK OF DISPLAY UNIT
1. " ▲ " Button
For setup preferences and
viewing records.
2. " ▼ " Button
For setup preferences and
viewing records.
3. SET Button
For setup preferences.
4. Fold-out Tabletop Stand
5. Battery Compartment
6. Intelli-Time Battery
Compartment
7. Integrated Hang Hole
For easy placement.
8. Battery Compartment Cover
11
10
9
78
9. Date
10. Intelli-Time Clock
Automatically updates for Daylight
Saving Time.
11. Current Indoor Temperature
12. Display Low Battery Indicator
1 2 3 4 5 6 7
8
3

LITHIUM S -
BATTERIESiP'1ilili1'M
ALKALINE
BATTERIES
(70°C) 158°F I
(70°C) 158°F I
SETUP
Install or Replace Batteries
AcuRite recommends high quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.
The outdoor sensor requires lithium batteries in low temperature conditions.
Cold temperatures can cause alkaline batteries to function improperly. Use
lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Outdoor Sensor
1. Slide off the battery compartment
cover.
2. Insert 2 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.
3. Replace the battery cover.
Display Unit
1. Slide off the battery compartment
cover.
2. Insert 2 x AA batteries into the
battery compartment, as shown.
Follow the polarity (+/-) diagram in
the battery compartment.
3. Replace the battery cover.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to
be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of
used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries
in re, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT
recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
4

Intelli-Time®Clock
Intelli-Time products are pre-programmed with the correct time and date.
Intelli-Time technology instructs the time and date to set themselves. All you
need to do is select your Time Zone and Daylight Saving Time preferences. The
clock will then automatically set itself and change for Daylight Saving Time.
Set the Time, Date & Units
Press the “SET” button, located on the back of the display unit, to enter SET
MODE. Once in set mode, the preference you are currently setting will blink on
the display.
To adjust the currently selected (ashing) item, press and release the “ p ” or
“ q “ buttons (press and HOLD to fast adjust).
To save your adjustments, press and release the “SET” button again to adjust
the next preference. The preference set order is as follows:
TIME ZONE ( PST MST CST EST AST HAST AKST)
DST (Daylight Saving Time ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE SCALE (˚F or ˚C)
BAROMETRIC PRESSURE SCALE (inHg or hPa)
*If you live in an area that observes DST, DST should be set to ON, even if it is
not currently Daylight Saving Time.
You will automatically exit SET MODE if no buttons are pressed for 30 seconds.
Enter setup mode at any time by pressing the “SET” button.
5

"U'
-IJIJ...,-
..
( \ u,l,11, li.'3S
· :::;;; /1:r;JI 8
l
1111
\ I I
--o--
--
/ I \'
Placement for Maximum Accuracy
AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display unit and outdoor sensor are critical to the
accuracy and performance of this product.
Display Unit Placement
Place the display unit in a dry area free of dirt and dust.
Display unit stands upright for tabletop use or is wall-mountable.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant and is designed for general outdoor
use, however, to extend its life place the sensor in an area
protected from direct weather elements.
Hang the sensor using the integrated hang holes or hanger, or
by using string (not included) to hang it from a suitable location,
like a well covered tree branch. The best location is 4 to 8 feet
above the ground with permanent shade and plenty of fresh air
to circulate around the sensor.
Important Placement Guidelines
•To ensure accurate temperature measurement, place units out of direct
sunlight and away from any heat sources or vents.
•Display unit and outdoor sensor must be within 165 ft (50 m) of each other.
•To maximize wireless range, place units away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless communication.
•To prevent wireless interference, place both units at least 3 ft (.9 m) away
from electronic devices (TV, computer, microwave, radio, etc.).
TV 3
(165 feet maximum)
(.9 m)
AT
LEAST
APART
(50 meters)
Setup is Complete
The sensor will now synchronize with the display unit. It may take a few
minutes for synchronization to complete. Please refer to the troubleshooting
section of this manual if anything appears to be functioning improperly.
6

C=;» C=;» C=;» C=;» f?--C=;»
c~ :::.>
C~;;;, c~;;;, C:::>
..- --~*... ...~."'
: ---~! ~;>
*~*~·- ~
ff• g*g,,,g• * * *"' . - - - -
• •
NEW WAXING 1ST WAXING
CRESCENT QUARTER GIBBOUS FULL WANING 3RD WANING
GIBBOUS QUARTER CRESCENT
OPERATION
Using the Weather Forecaster Learning Mode
Self-Calibrating Forecasting uses a unique algorithm to analyze changes in
pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the Learning Mode icon disappears from the display screen. At
this point, the self-calibrated pressure is tuned in to your location and the unit is
ready for superior weather prediction.
Weather Forecast
AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast
of weather conditions for the next 12 to 24 hours by collecting data from
the sensor in your backyard. It generates a forecast with pinpoint accuracy -
personalized for your exact location.
RAIN/SNOW
MIX LIKELY
(flashing=stormy)
SNOW
LIKELY
LIGHT RAIN
LIKELY CLOUDY MOSTLY CLOUDY
View the complete list of icons at www.AcuRite.com/acurite-icons
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons.
Barometric Pressure
Subtle variations in barometric pressure greatly impact the weather. This
weather forecaster displays the current pressure in inHg or hPa. The history
chart lets you monitor the change in pressure over time.
High & Low Records
Today’s high and low records are displayed for indoor and outdoor temperature.
Today’s records automatically clear at 12:00am midnight every day.
To view today's LOW records, press the “q” button on the back of the unit. To
manually clear today’s LOW recorded values, press and hold the “q” button
for 2 seconds. Dashes display to conrm you have cleared the LOW records.
To view today's HIGH records, press the “p” button on the back of the unit. To
manually clear today’s HIGH recorded values, press and hold the “p” button
for 2 seconds. Dashes display to conrm you have cleared the HIGH records.
7

T111I
Troubleshooting
No outdoor sensor
reception
no bars
If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor.
The units must be within 165 ft (50 m) of each other.
• Make sure both units are placed at least 3 feet (.9
m) away from electronics that may interfere with the
wireless communication (such as TVs, microwaves,
computers, etc).
• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It
may take up to 20 minutes for display unit and sensor
to synchronize after batteries are replaced.
Display screen
not working
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
Outdoor
temperature
is ashing or
showing dashes
Flashing of the outdoor temperature is generally an
indication of wireless interference.
1. Bring both the sensor and display unit indoors and
remove at least one battery from each.
2. Reinstall the battery in the outdoor sensor.
3. Reinstall the battery in the display unit.
4. Let the units sit within a couple feet of each other
for about 20 minutes to gain a strong connection.
Inaccurate forecast
• Weather Forecast icon predicts conditions for the next
12 to 24 hours, not current conditions.
• Has Learning Mode icon disappeared from the
display unit? Learning Mode must complete before
forecast and pressure will be accurate.
• Allow unit to run continuously for 33 days. Battery
removal or resetting the display unit will restart
Learning Mode. After 14 days, forecast should be
fairly accurate, however Learning Mode calibrates for
a total of 33 days.
Inaccurate
temperature
• Make sure both the display unit and sensor are
placed out of direct sunlight and away from any heat
sources or vents (see page 6).
If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
[phone] for assistance.
8

WARNING: THIS PRODUCTCONTAINS A BUTTON-CELL BATTERY.IF SWALLOWED, IT~
COULDCAUSESEVEREINJURY ORDEATHIN JUST 2 HOURS.
SEEK MEDICAL ATTENTION IMMEDIATELY IF INGESTED.
~
POISON
Care & Maintenance
Display Unit Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.
Outdoor Sensor Care
Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.
Replace Intelli-Time Battery
Intelli-Time technology is
powered by a pre-installed
coin-cell battery that stores
the time and date settings.
The battery has a shelf life of
several years. To replace the
Intelli-Time battery:
1. Locate the coin cell battery
compartment door on
the back of the display
unit, inside the battery
compartment. Unscrew and
remove the compartment
cover.
CR2032
3V
Install battery with “+” positive
terminal facing OUT.
2. Insert 1 x CR2032 coin cell battery into the battery compartment, as
shown. Install battery with “+” positive terminal facing OUT.
3. Screw in the battery cover.
9

Specications
TEMPERATURE RANGE Outdoor: -40ºF to 158ºF; -40ºC to 70ºC
Indoor: 32ºF to 122ºF; 0ºC to 50ºC
WIRELESS RANGE 165 ft / 50 m depending on home construction materials
OPERATING FREQUENCY 433 MHz
POWER Display: 2 x AA alkaline batteries
Sensor: 2 x AA akaline or lithium batteries
DATA REPORTING 30 second updates
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, There is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.
Such modications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
10