ACV SmartLine SLME User manual

High efficiency hot water storage
8
SmartLine SLME
Multi-Energy cylinder with the advantages of Tank-in-
Tank technology and the added benefit of a carbon
steel coil located at the bottom in the primary water.
The large heating surface area and increased primary
volume of the SLME tanks not only increase recovery
time, but also ensure all energy from your renewable
source is absorbed into the tank, reducing fuel bills
and ultimately helping the environment.
Due to the unique design of the Multi-Energy cylinder
and the large primary thermal store, it is the perfect
partner for Solar, Heat Pumps, Pellet Burners, Heat
Recovery Systems, District Heating Applications and
more.
Advantages Over Twin Coil Tank
• Increased heating surface for rapid domestic hot
water recovery
• Large primary volume allows for greater thermal
store
• Can be used as a low loss header for heating circuit
• Smaller compact tank with increased performance
• Immersion heater in primary circuit
• More heat sources absorbed into the tank
• Flexible design options for specifiers and installer
• Extra primary connections for connecting to heating
circuit
Designed for a range of
applications and a multiple
choice of energy sources.
HEAT PUMP
POMPE A CHALEUR
When to install a Smart Line Multi Energy
Solar applications District/centralised
heating applications
Wood/pellet boiler applications
Heat pump applications
1. Polypropylene top lid
2. Polypropylene shell
3. Stainless steel tank (DHW)
4. Polypropylene bottom lid
5. Manual air purge
6. Polyurethane foam insulation
7. Dry well for sensors
8. Outer steel tank (primary
circuits) see diagrams page 9
9. Electric heating element
10. Carbon steel coil
1
5
3
6
10
4
2
8
8
8
9
7

High efficiency hot water storage 9
Technical Data
Performance Data
Dimensions
SLME120 SLME200 SLME300 SLME400 SLME600
Total capacity L 123 203 303 395 606
Primary capacity L 46 95.7 165 219 365
Domestic capacity L 77 99 126 164 225
Coil capacity L 3 8.3 12 12 16
Primary fluid flow rate Ltrs/hr 2100 3000 3000 3000 3000
Coil fluid flow rate Ltrs/hr 2300 3000 3000 3000 3000
Primary pressure drop mbar 32 40 42 45 48
Coil pressure drop mbar 160 460 533 533 186
Tank heating surface m21.08 1.26 1.46 1.94 1.90
Coil heating surface m20.78 1.42 1.80 1.80 2.50
Max operating pressure heating circuit bar 3 3 3 3 3
Max operating pressure DHW circuit bar 10 10 10 10 10
Max operating pressure coil circuit bar 10 10 10 10 10
Max operating temperature °C 90 90 90 90 90
Weight empty kg 65 68 99 120 180
Coil connection Ø 3/4" F 1" F 1" F 1" F 1" F
Primary connection Ø 3/4" F 1" F 1" F 1" F 1" F
Secondary connection cold DHW Ø 3/4" F 3/4" M 3/4" M 3/4" M 3/4" M
SLME120 SLME200 SLME300 SLME400 SLME600
Litres in first 10 minutes
40°C 300 321 418 558 686
Litres in first 10 minutes 45°C 242 275 348 464 582
Litres in first 10 minutes 60°C 146 161 206 274 358
Litres in first hour 40°C 938 1063 1225 1633 1872
Litres in first hour 45°C 751 911 1003 1338 1559
Litres in first hour 60°C 426 536 590 786 935
Continuous flow at 40°C L/h 827 890 967 1289 1423
Continuous flow at 45°C L/h 673 763 786 1048 1172
Continuous flow at 60°C L/h 378 450 461 614 693
Please Note: Performance data assumes a primary flow temperature of 85°C and a domestic cold water supply of 10°C
Heating Source - external boiler connected to tank
182,5
335
1497
562,5
SLME 120
130
50
487
115
192,5
1070
325,5
120
1497
540,5
SLME 200
635,5
597
565
SLME 300
673
360
150
360
150
249
145
110
145
350
300
239
80
120
1609
504
519
230
80
120
1940
515
SLME 400
240
145
510
135
120
600
400
673
360
150
SLME 600
254
80
180
1915
634
264
185
594
145
140
538
320
135
817
135 135
*
SLME 200 – Solar tank only (no outer jacket connection for heating circuit). Consult ACV for details - see website.
*