Adaptive Recognition Osmond L User manual

Adaptive Recognition Oces
Adaptive Recognition Nordic
phone: [phone]
Adaptive Recognition Hungary
phone: [phone]
Adaptive Recognition America
phone: [phone]
Adaptive Recognition Singapore
phone: [phone]
Test page
Copyright © 2021 Adaptive Recognition Inc.
Your feedback is important for us to ensure that our products perfectly
meet your requirements.
Feel free to tell us your opinion.
Place the document onto the scanner tray of the device.
Quick Install Guide
Quick Install Guide
PASSPORT READERS & ID SCANNERS
Osmond reads ID data to auto-poluate any software
or form in the blink of an eye. It’s much faster
than a professional typewriter and makes no errors.
A000000022HUN9102147F2402147IS20090105<<<<96
P<HUNADAPTIVE<RECOGNITION<HUNGARY<<SAMPLE<<<
ADAPTIVE RECOGNITION HUNGARY
IS2009015
ADAPTIVE RECOGNITION HUNGARY
P HUN A00000002
SAMPLE
HUNGARY
HUNGARIAN
F
14 FEBR/FÉV 91
14 FEBR/FÉV 14
14 FEBR/FÉV 24

Quick Install GuideQuick Install Guide
MUSB C-type cable
MPower supply
MPower cord
MEthernet cable
MPower supply
MPower cord
Assembly / Cables
Setting up your passport reader device is nice and easy
– simply follow these steps:
2. How to Get Started
Introduction
Osmond L, R, and N
Osmond L, Osmond R Osmond N
Thank you for choosing Adaptive Recognition’s state-of-the-art ID reading and
authentication solutions.
This guide will quickly take you through the steps of setting up your new passport reader.
If you need more detailed instructions, you can always have access to the full install guides.
Please refer to the QR code at Section 3.
2.1 USB External-powered devices
Osmond R, Osmond L
2.2 Network devices
Osmond N
MConnect the USB cable to the scanner
and to the PC
MConnect the power supply to the
scanner
MConnect the power cord to the power
supply and to the wall socket
MTurn the device on by covering the
power touch button for 1-2 seconds
MConnect the power supply to the
scanner
MConnect the power cord to the power
supply and to the wall socket
MConnect an Ethernet cable to the
scanner and to the PC / router
MTurn the device on by covering the
power touch button for 1-2 seconds
3. Install USB Device
Osmond L, Osmond R
Follow this link
to access the software options
and user’s manuals.
Download the software and
user’s manual:
http://doc.arh.hu/pr/
1. What’s in the Box? Osmond N
Network devices have onboard processing with pre-installed software;
the devices does not require any driver to be installed on your PC
For further information on the appropriate access
of the web interface and using the device, please consult the user’s manual
by scanning the QR code in Section 3.
If DHCP network is available, access Osmond at the obtained IP and port:
http://{allocated IP address}:3000
DEFAULT USER ACCOUNT:
Login name: owner
Password: Owner123*
By default, the device is accessible on the factory fallback IP address:
http://192.0.2.3:3000
4. Access Network Device
www.adaptiverecognition.com www.adaptiverecognition.com/support
Technical SupportWebpage