1
Programming Quick Guide
-DC9263A: Wearable Scanner
Wearable Scanner:
Press the ring trigger to enable the scanner.
Installation
They are Plug &Play USB (HID) devices. When plugged into your Android
OTG devices, it can be recognized as barcode scanner and begin to scan
the barcode. Before using scanner, make sure the smartphone or tablet
is fully charged. Open your APP, they can work as a keyboard input.
Reset Configuration to Default :
If you are unsure of the scanner configuration or have scanned the
incorrect codes, please scan A1 to A2 for USB HID or B1 for RS232 or
USB Serial. This will reset the scanner to its factory defaults.
USB HID RS232 / USB Serial.
A1 B1
A2
*Note : Please install PL-2303 driver for USB serial
Keyboard Language (For USB HID only)
Scan the appropriate country code as below to program the
keyboard layout for your country or language. As a general
rule, the following characters are supported, but need special
care for countries other than the United States:
@ | $ # { } [ ] = / ‘ \ < > ~
USA
(Original setting)
Italian
Norway France
Germany Vietnam
Sweden Spain
Denmark
ortu
al
Switzerland Hun
ary
1D Symbologies – 1
ENABLE CODABAR DISABLE
ENABLE Code 39 DISABLE
ENABLE Code 32
DISABLE
ENABLE
Code 39
FULL ASCII
DISABLE
ENABLE Interleaved 25 DISABLE
ENABLE Code93 DISABLE
ENABLE Matrix 25 DISABLE
ENABLE IATA 25 DISABLE
