manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Addonics Technologies
  6. •
  7. Control System
  8. •
  9. Addonics Technologies DGC7 User manual

Addonics Technologies DGC7 User manual

ADDONICS TECHNOLOGIES
Model: DGC7
Quick Guide
I. DigiCopier VII Overview
There are four buttons and an LCD on the panel of DigiCopier
VII. 1 –LCD shows a function or a message.
2 –it is used to scroll up function menus.
3 –it is used to scroll down function menus.
4 –it is used to execute a function.
5 –it is used to cancel a function.
II. Connecting the power cable and turning on the
DigiCopier VII
a. Connect the power cord provided from the wall outlet to the
back of the DigiCopier VII.
b. A main power switch is located at the back of the tower. Turn
the switch on. Another auxiliary power switch is located on
the front of the tower.
III. Steps for the Copying Process
Note: may not able to copy-protected DVD or CD.
Step 1 Turn on the DigiCopier VII by
pressing the auxiliary power switch.
Step 2 Insert media you wish to
duplicate into the source tray on the
top.
Step 3 Populate the destination trays
with blank CDs or DVD media. A
rewritable DVD containing old data can
also be use, but the old data will be
automatically erased.
Step 4 After the DVD-ROM and DVD
writers detect DVDs, press ENT button
to start copying.
LCD will show the copying information as follows.
When copying is in progress, MB and time will decrease while
the percentage of completion will increase. “MB” means the size
of data that you want to copy.
When copying comes to an end, LCD will show the results as
follows. The DVDs that were successfully copied will eject
automatically.
The complete user manual of the DVD Duplicator can found in
the Driver Disk under User Guides or can be downloaded from
http://www.addonics.com/support/user_guides/
TECHNICAL SUPPORT
Email: http://www.addonics.com/sales/query/
Internet: http://www.addonics.com
Technical Support (8:30 am to 6:00 pm PST)
Phone: 408 453-6212
Email: http://www.addonics.com/support/query/
Auxiliary
Power Switch
Source tray
Destination tray 1
Destination tray 2
Destination tray 3
LCD Panel
Destination tray 4
Destination tray 5
Destination tray 6
Destination tray 7

Popular Control System manuals by other brands

LSC MANTRA LITE quick start guide

LSC

LSC MANTRA LITE quick start guide

VIPA System 200V Series manual

VIPA

VIPA System 200V Series manual

Vex IQ user guide

Vex

Vex IQ user guide

Pego 200SCH202HYP user manual

Pego

Pego 200SCH202HYP user manual

Axis TU9001 installation guide

Axis

Axis TU9001 installation guide

Penn Connected PC10 Commissioning Guide

Penn

Penn Connected PC10 Commissioning Guide

Philips LIGHTOLIER CONTROLS LYTESCENE ILSCLTSII user guide

Philips

Philips LIGHTOLIER CONTROLS LYTESCENE ILSCLTSII user guide

GRASS VALLEY ENCORE 1.8.0 - CONFIGURATION  10-2010 Configuration manual

GRASS VALLEY

GRASS VALLEY ENCORE 1.8.0 - CONFIGURATION 10-2010 Configuration manual

Idemia SIGMA Series Quick user guide

Idemia

Idemia SIGMA Series Quick user guide

RIB RAPID PARK manual

RIB

RIB RAPID PARK manual

Siegenia DRIVE operating instructions

Siegenia

Siegenia DRIVE operating instructions

Autronica AutroMaster ISEMS Installation and commissioning guide

Autronica

Autronica AutroMaster ISEMS Installation and commissioning guide

Siemens PCS 7 Service manual

Siemens

Siemens PCS 7 Service manual

Frico FCDF quick guide

Frico

Frico FCDF quick guide

Electronics Diversified EnAct user manual

Electronics Diversified

Electronics Diversified EnAct user manual

Precision Engineering Bimba PCS user manual

Precision Engineering

Precision Engineering Bimba PCS user manual

Intermatic MULTIWAVE PE653RC Programming and usage instructions

Intermatic

Intermatic MULTIWAVE PE653RC Programming and usage instructions

Honeywell 900CS10-00 Installation

Honeywell

Honeywell 900CS10-00 Installation

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.