1. Safety instructions
1.1. Environmental recommendations
All unnecessary packing materials have been eliminated. We have made every possible effort to ensure that the packaging can easily
be separated into three types of materials: cardboard (box), expandable polystyrene (buffer material) and polyethylene (bags and
protective foam layer). Your appliance is composed of materials that can be recycled and reused if it is dismantled by a specialist
company. Please respect local regulations concerning the method of disposal of old packaging materials, worn out batteries and your
previous equipment.
1.2. Warnings
Valid for AMR gateways references : ARF8011BA
Read the instructions contain in the user guide.
Security provided by this product is only ensured for use for its intended purpose.
Maintenance can only be performed by qualified personnel.
Warning, when the equipment is opened, do not perform operations other than those specified in this manual.
Warning : Do not open the product, electric shock.
Warning : For your safety, it is imperative that before any technical work on the equipment it is turned off (via the supplied mains
version).
Warning : when the antenna is installed outside (external antenna version), it is imperative to connect the cable shield to the ground
of the building. It is recommended to use a protection against lightning. Protection kit selected must allow grounding of the coaxial
cable (eg coaxial lightning arrester with grounding cable at different locations at the bottom of the antenna tower and entrance, or
just before enter the premises).
Requires that the product is equipped with a disconnecting means to power off the power. It should be close to the equipment.
Dangerous voltages are present in the product (other than mains). Before any work they must also be cut.
All electrical connections to the product must be equipped with a protective device against overload and short circuits..
1.3. Usage Recommandations
• Before using the system, check that the supply voltage specified in its user manual corresponds to your power source. If this is
not the case consult your supplier.
• Place the appliance against a flat firm and stable surface.
• The appliance should be installed in a location that is sufficiently ventilated to eliminate any risk of internal overheating and
should not be covered by objects such as newspapers, cloths, curtains, etc.
• The appliance’s aerial should be in the open and at least 10 cm clear of any conducting material
• The appliance should never be exposed to sources of heat such as heating appliances.
• Do not place the appliance close to objects producing open flames such as candles, welding torches, etc.
• The appliance should not be exposed to aggressive chemical products or solvents that could affect the plastic materials or
corrode metal components.
• Install your appliance close to its DC power source (mains power version).
1.4. Waste disposal by users in private households in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by handing it to a designated collection point for the recycling
of electrical and electronic equipment. The separate collection and waste your time of disposal recycling will help to conserve natural
resources and ensure a sound recycling environment and human health. For more information about the recycling center nearest your
home, contact the nearest service hall of garbage disposal service or the shop where you purchased the product.