ADIR 615 User manual

Part Description QTY.
ASide Bar 2
Bsliding
bars 2
CL Bars 2
DLocking
Caster 2
ECaster 2
Part Description QTY.
FMedium
Screw 4
GLong
Screw 6
HAcorn Nut 2
IKnob Bolt 2
JWing Nut 2
PARTS LIST

2. Attach L frames (Part C) together. Adjust
to le size, inserting knob bolts (Part I)
into appropriate holes. Tighten using wing
nuts (Part J) according to picture.
A
A
E
E
D
D
J
I
C
1. Insert Casters (Part D&E) into bottom of
Side Bars (Part A - bigger thread openings
facing down for casters). Attach both
locking casters to same side bar.

3. Attach Side Bars (Part A) to L Bars (Part C)
according to picture. Insert Long screw (Part G)
into upper two holes through L Bars tightening
with Acorn Nuts (Part H), third screw into bottom
hole tightening into L Bar frame
4. Attach sliding bars (Part B) to the top
of the Side bars (Part A) inserting short
screws (Part F) according to picture.
B
F
C
A
H
G
G
B
Upper
holes of
side bars
facing the
inside.