ADIROffice ADI629-02 Series User manual

Small
USER GUIDE
ADI629-02-SERIES
Kids
Locker

AdirOce has a commitment to
deliver quality and stylish oce
furniture and equipment.
We understand starting and maintaining a business is expensive enough.
We can help you make it cost effective and beautiful. Plus, our expert team
makes sure everything you need works as efciently as possible.
Thank you
for your
purchase.

1 Parts List
2 Assembly Instructions
9 Mounting Instructions
10 Notes
11 Limited Warranty
12 Disclaimer
Table of Contents

1
PARTS
Check your package and your carton should contain all items shown in the parts list below - if not, consult the
retailer who sold you the product.
Parts Included
Door (1)
Top Panel (7) 4x Small
Screws (C)
Left Side
Panel (2)
Base (8)
Keys (D)
Back
Panel (3)
Right Side
Panel (4)
Large Hinge
Pin (E)
2x Double
Hook (A)
Front Leg (5)
Back Leg (6)
4x Big
Screws (B)
Small Hinge
Pin (F)
2x Wall Anchor
Screw (G)
Plastic
Hinge Bush (I)
2x Rubber
Buffer (H)

2
Assembly Instructions
6
4
2
B
B
STEP 1:
Turn the Left Side Panel (2) and the Right-Side Panel (4) upside-down. Insert the Back Leg (6) into
the shorter holes of both side panels, apply pressure. Insert the Front Leg (5) into the deeper slots
and apply pressure. Insert all four Big Screws (B) into the bottom of the legs.
5

3
Assembly Instructions
STEP 2:
Flip the locker to the upright position and align the Back Panel (3) between Left Side Panel (2) and the
Right-Side Panel (4).
4 2
3

Assembly Instructions
4
STEP 3:
Insert the Top Panel (7) onto the locker. Ensure that the locker’s edges are aligned with the lips found
underneath the Top Panel (7). Push the top portion into place by applying some pressure. Make sure all
edges snap in rmly.
7

5
Assembly Instructions
STEP 4:
Insert the Plastic Hinge Bush (I) in the hole on
the bottom right of the locker’s Front Leg (5).
Insert the Small Hinge Pin (F) in the hole on top of
the locker door (See Figure 1 on the next page).
Insert the Small Hinge Pin (F) with the Door (1) in
the hole located under the right side of the Top
Panel (7). (See Figures 2 and 3 on the next page.)
Next, take the Large Hinge Pin (E), insert it into the
hole on the bottom of the Door (1), lock it into
place by passing it through the slot on the Door
(1). (See Figures 4, 5, 6).
I

6
Assembly Instructions
F
E

7
Assembly Instructions
STEP 6:
Attach the Double Hook (A) with the Small Screws (C).
AC
STEP 5:
Insert the Base (8) into the locker by pressing down with edges pointing down and the smooth side up.

8
Assembly Instructions
STEP 7:
Insert the two Rubber Buffer’s (H) in the top and bottom corners of the Door (1), as shown.
H
1

9
Mounting Instructions
INSTALLATION INSTRUCTIONS
14
Mounting the locker unit(s) to the wall
Single Locker
ƔThere are two holes near the top of the back panel of your
locker.
ƔPlace your locker where you want to install it. Using a pencil,
mark the location of each of these holes on the wall.
ƔRemove the locker(s) from the wall. In the marked locations,
drill a hole large enough for the anchor screw (make sure you
don’t drill it too large!)
ƔUsing a Phillips screwdriver, twist each mounting screw
through the back of the locker and into the holes in the wall.
Hand tightening is recommended; using a drill could damage
the hole.
3
G
G
STEP 1:
A. There are two holes near the top of the Back Panel (3) of your locker.
B. Place your locker where you want to install it, and using a pencil, mark the location of each
hole on the wall.
C. In the marked locations, drill a hole large enough for the Wall Anchor Screws (G).
D. Using a Phillips head screwdriver, twist each of the Wall Anchor Screws (G) through the
back of the locker and into the holes in the wall.
E. Hand tighten each Wall Anchor Screw (G) as using a drill could damage the hole.

10
Notes
INSTALLATION INSTRUCTIONS
14
Mounting the locker unit(s) to the wall
Single Locker
ƔThere are two holes near the top of the back panel of your
locker.
ƔPlace your locker where you want to install it. Using a pencil,
mark the location of each of these holes on the wall.
ƔRemove the locker(s) from the wall. In the marked locations,
drill a hole large enough for the anchor screw (make sure you
don’t drill it too large!)
ƔUsing a Phillips screwdriver, twist each mounting screw
through the back of the locker and into the holes in the wall.
Hand tightening is recommended; using a drill could damage
the hole.

11
Limited Warranty
1. AdirCorp (the company) warrants to the purchaser that the product will be free from
defects in workmanship and materials for a period of one (1) year from the date of
purchase.
2. These warranties are not assignable or transferable to any other person.
3. Any damage to the product as a result of misuse, tampering, abuse, neglect, accident,
improper installation, modification, unauthorized service, destruction, or the alteration of
the serial number, or use violate of the instructions furnished by the Company will void this
warranty.
4. The sole responsibility of the Company shall be limited to the repair or replacement (in its
sole discretion) of any component of the product which fails to conform to this warranty at
no cost to the purchaser for the period of the warranty.
5. Contact the Company directly to obtain service under this warranty. If it becomes
applicable to send a defective product to the Company, a Return Authorization Number
must first be obtained from the company. In order to obtain service under this warranty,
purchaser must provide the Company with the following items (a) proof of purchase, (b)
police or fire department report, (c) photographs of damaged sad, and (d) written
testimonial.
6. Products shipped without prior Return Authorization and Return Authorization Number may
not be accepted, and the Company will not be responsible for their disposition and/or cost
of return to the owner.
7. The Company will not assume any responsibility for any loss or damage incurred in ship-
ping. All return authorized products should include a copy of the original invoice in order
that this warranty may be Honored.
8. This warranty is not an insurance policy. The Company is not responsible for any manner of
damage to or theft of the Purchaser’s product or its contents.
9. We recommend that the product being returned is accompanied by the sales receipt with
all relevant information regarding the purchase of the item and is returned to the Company
within ten (10) days of the claim date of purchase to validate this warranty.
10. Any implied warranties that the purchaser may have are limited to the duration of the
warranties described above. There are no further warranties that extend or apply beyond
the face hereof, and the company expressly disclaims and excludes any and all warranties
of merchantability or fitness for a particular purpose. Some states do not allow limitations
on how long an implied warranty lasts, so the above limitation may not apply to you.
11. Repair or replacement shall be the sole remedy for the purchaser under this warranty. The
company shall not be liable for any direct, indirect, incidental or consequential damages,
losses or expense arising from the use or misuse of the product. Some states do not allow
the exclusion or limitations of incidental or consequential damages, so the limitation may
not apply to you.
12. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.

12
Disclaimer
By purchasing products from AdirCorp, user agrees as follows:
TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS AND INFORMATION
ON THIS SITE IS PROVIDED “AS IS” AND WITH ALL FAULTS AND ADIRCORP. MAKES NO
PROMISES, REPRESENTATIONS, OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
OR OTHERWISE, WITH RESPECT TO THE PRODUCTS AND INFORMATION, INCLUDING
ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR DESCRIPTION, OR
THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND ADIRCORP. SPECIFICALLY
DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE, MERCHANTABILITY, NON
INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY OR COMPLETENESS,
QUIET ENJOYMENT, AND QUIET POSSESSION. THE ENTIRE RISK ARISING OUT OF USE OR
PERFORMANCE OF THE PRODUCTS AND INFORMATION LIES WITH USER.
TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL ADIRCORP PRODUCTS
OR ITS SUPPLIERS BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, INDIRECT, OR
EXEMPLARY DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY RELATING TO THIS
AGREEMENT OR USER’S USE OF OR INABILITY TO USE THE PRODUCTS AND INFORMATION,
OR THE PROVISION OR FAILURE TO PROVIDE SUPPORT SERVICES, INCLUDING, BUT
NOT LIMITED TO, LOST PROFITS, LOSS OF CONFIDENTIAL OR OTHER INFORMATION,
BUSINESS INTERRUPTION, PERSONAL INJURY, LOSS OF PRIVACY, FAILURE TO MEET
ANY DUTY (INCLUDING OF GOOD FAITH OR REASONABLE CARE), NEGLIGENCE, COSTS
OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR ANY OTHER CLAIM FOR
PECUNIARY OR OTHER LOSS WHATSOEVER, OR FOR ANY CLAIM OR DEMAND AGAINST
USER BY ANY OTHER PARTY, EVEN IF ADIRCORP HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF
ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
NOTWITHSTANDING ANY DAMAGES USER MAY INCUR FOR ANY REASON WHATSOEVER
(INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL DIRECT
OR GENERAL DAMAGES), THE ENTIRE LIABILITY OF ADIRCORP AND ANY OF ITS SUPPLIERS
UNDER ANY PROVISION OF THIS AGREEMENT AND YOUR EXCLUSIVE REMEDY FOR ALL
OF THE FOREGOING SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY
PAID FOR THE PRODUCTS AND INFORMATION OR U.S. $1. THE FOREGOING LIMITATIONS,
EXCLUSIONS, AND DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, EVEN IF ANY REMEDY FAILS ITS ESSENTIAL PURPOSE.
If any provision of this Agreement is declared invalid or unenforceable, the remaining provisions
of this Agreement will remain in effect. AdirCorp has the right to modify these terms and
conditions at any time.

13
Item Number: ADI629-02-SERIES
64 Mountainview Blvd. • Wayne, NJ • 07470 • ©2021 All Rights Reserved.
adircorp.com