Mocka Mikkel User manual

Mikkel Bench Seat
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
bolt
x16
E
allen key
F
small bolts
x14
G
screw covers
x14
B
small washer
x16
C
small washer
x16
D
dowel
x1
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

12
Mikkel Bench Seat
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 2 x panels [5] to panel [4] and secure with 16 x bolts (A), 16 x
small washers (B) and 16 x large washers (C). Tighten with an Allen
Key (E).
Attach panels [2] and [3] to assembled frame and secure with 6 x small
bolts (E). Tighten with an Allen Key (E).
F
E

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [1] to assembled frame and secure with 6 x small bolts (E)
and 1 x dowel (D). Tighten with an Allen Key (E).
Slide panel [6] into position as shown. Attach 14 x screw covers (G).
Once assembled lift furniture into place, do not drag. Ensure unit is
balanced and steady before use. You’re done, enjoy!
Mikkel Bench Seat
4