ADJ MIRAGE Q IPCB User manual

User Guide
MIRAGE Q IPCB

2
©2022 ADJ Products, LLC all rights reserved. Informa-
tion, specications, diagrams, images, and instructions
herein are subject to change without notice. ADJ Products,
LLC logo and identifying product names and numbers
herein are trademarks of ADJ Products, LLC. Copyright
protection claimed includes all forms and matters of copy-
rightable materials and information now allowed by statu-
tory or judicial law or hereinafter granted. Product names
used in this document may be trademarks or registered
trademarks of their respective companies and are hereby
acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of
their respective companies.
ADJ Products, LLC and all afliated companies hereby
disclaim any and all liabilities for property, equipment,
building, and electrical damages, injuries to any persons,
and direct or indirect economic loss associated with the
use or reliance of any information contained within this
document, and/or as a result of the improper, unsafe,
insufcient and negligent assembly, installation, rigging,
and operation of this product.

3
DOCUMENT VERSION
Due to additional product features and/or
enhancements, an updated version of this
document may be available online.
Please check www.adj.com for the latest
revision/update of this manual before
beginning installation and/or program-
ming.
Date Document
Version
Software
Version
DMX
Channel Notes
06/30/22 1.0 N/A N/A Initial
Release

4
CONTENTS
Introduction 5
Limited Warranty (USA Only) 8
Warranty Returns (USA Only) 11
Safety Guidelines 12
Installation 14
Operation 15
Cleaning and Maintenance 16
Dimensional Drawings 18
Specications 19

5
INTRODUCTION
Unpacking: Thank you for purchasing the Mirage Q IPCB by ADJ
Products, LLC. Every device has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to have been damaged, carefully inspect your xture
for any damage and be sure all accessories necessary to operate
the unit have arrived intact. In the event that damage has been found
or parts are missing, please contact our toll free customer support
number for further instructions. Do not return this unit to your dealer
without rst contacting customer support.
Introduction: The ADJ Mirage Q IPCB is a charging base designed
for use with the ADJ Mirage Q IP lighting xture. To optimize the per-
formance of this product, please read these operating instructions
carefully to familiarize yourself with the basic operations of this unit.
These instructions contain important safety information regarding the
use and maintenance of this unit. Please keep this manual with the
unit for future reference.

6
INTRODUCTION
Customer Support: Contact ADJ Service for any product related ser-
vice and support needs. Also visit forums.adj.com with questions, com-
ments or suggestions.
Parts: To purchase parts online visit:
http://parts.adj.com (US) |http://www.adjparts.eu (EU)
ADJ SERVICE USA - Monday - Friday 8:00am to 4:30pm PST
Voice: 800-322-6337 | Fax: [phone] | [email protected]
ADJ SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
Voice: [phone] | Fax: [phone] | [email protected]
ADJ PRODUCTS LLC USA
6122 S. Eastern Ave. Los Angeles, CA. 90040
323-582-2650 | Fax [phone] | www.adj.com | [e-mail]
ADJ SUPPLY Europe B.V
Junostraat 2 6468 EW Kerkrade, The Netherlands
[phone] | Fax [phone]
www.americandj.eu | [email protected]
ADJ PRODUCTS GROUP Mexico
AV Santa Ana 30 Parque Industrial Lerma, Lerma, Mexico 52000
[phone]

7
INTRODUCTION
WARNING! Unit is intended for indoor use only! Do not expose to
rain and/or moisture!
CAUTION! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, as doing so will void your manufacturer’s
warranty. In the unlikely event your unit may require service, please
contact ADJ Products, LLC.
Do not discard the shipping cartoon in the trash. Please recycle when
ever possible.

8
LIMITED WARRANTY (USA ONLY)
A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products,
LLC products to be free of manufacturing defects in material and workmanship
for a prescribed period from the date of purchase (see specific warranty period on
reverse). This warranty shall be valid only if the product is purchased within the
United States of America, including possessions and territories. It is the owner’s
responsibility to establish the date and place of purchase by acceptable evidence,
at the time service is sought.
B. For warranty service, you must obtain a Return Authorization number (RA#)
before sending the product back—please contact ADJ Products, LLC Service
Department at 800-322-6337. Send the product only to the ADJ Products, LLC
factory. All shipping charges must be prepaid. If the requested repairs or service
(including parts replacement) are within the terms of this warranty, ADJ Products,
LLC will pay return shipping charges only to a designated point within the United
States. If the entire instrument is sent, it must be shipped in its original package
and packaging material. No accessories should be shipped with the product. If
any accessories are shipped with the product, ADJ Products, LLC shall incur no
liability whatsoever for loss of or damage to any such accessories, nor for the
safe return thereof.
C. This warranty is void if the product serial number and/or labels are altered
or removed; if the product is modified in any manner which ADJ Products, LLC
concludes, after inspection, aects the reliability of the product; if the product has
been repaired or serviced by anyone other than the ADJ Products, LLC factory
unless prior written authorization was issued to purchaser by ADJ Products, LLC;
if the product is damaged because it was not properly maintained as set forth in
the product instructions, guidelines and/or user manual.

9
LIMITED WARRANTY (USA ONLY)
D. This is not a service contract, and this warranty does not include maintenance,
cleaning, or periodic checkup. During the period specified above, ADJ Products,
LLC will replace defective parts at its expense with new or refurbished parts, and
will absorb all expenses for warranty service and repair labor by reason of defects
in material or workmanship. The sole responsibility of ADJ Products, LLC under
this warranty shall be limited to the repair of the product, or replacement thereof,
including parts, at the sole discretion of ADJ Products, LLC. All products covered
by this warranty were manufactured after August 15, 2012, and bear identifying
marks to that eect.
E. ADJ Products, LLC reserves the right to make changes in design and/or
improvements upon its products without any obligation to include these changes
in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to
any accessory supplied with products described above. Except to the extent
prohibited by applicable law, all implied warranties made by ADJ Products, LLC
in connection with this product, including warranties of merchantability or fitness,
are limited in duration to the warranty period set forth above. And all warranties,
whether expressed or implied, including warranties of merchantability or fitness,
are limited in duration to the warranty period set forth above. The consumer’s
and/or dealer’s sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall ADJ Product, LLC be liable
for any loss and/or damage, direct and/or consequential arising out of the use of,
and/or inability to use this product.
G. This warranty is the only written warranty applicable to ADJ Products, LLC
products, and supersedes all prior warranties and written descriptions of warranty
terms and conditions heretofore published.

10
LIMITED WARRANTY (USA ONLY)
MANUFACTURER’S LIMITED WARRANTY PERIODS:
• Non-LED Lighting Products = 1-Year (365 Days) (Including Special Eect
Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble
Machines, Mirror Balls, Par Cans, Trussing, Lighting Stands, Power/Data
Distribution, etc. excluding LED and lamps)
• Laser Products = 1-Year (365 Days) (excluding laser diodes which have a
6-Month Limited Warranty)
• LED Products = 2-Year (730 Days) (excluding batteries which have a 180
Day Limited Warranty)
• NOTE: 2-Year (730 Days) Limited Warranty ONLY applies to product
purchased within the United States. StarTec Series = 1-Year (365 Days)
(excluding batteries which have a 180 Day Limited Warranty)
• ADJ DMX Controllers = 2 Year (730 Days)
• American Audio Products = 1 Year (365 Days)

11
WARRANTY RETURNS (USA ONLY)
All returned service items, whether under warranty or not, must be
freight pre-paid and accompanied by a return authorization (R.A.)
number. The R.A. number must be clearly written on the outside of
the return package. A brief description of the problem as well as the
R.A. number must also be written down on a piece of paper included
in the shipping carton. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain
an R.A. number by contacting our cus-tomer support team. All
packages returned to the service department not displaying an R.A.
number on the outside of the package will be returned to the shipper.

12
SAFETY GUIDELINES
FOR YOUR OWN PERSONAL SAFETY, PLEASE READ AND
UNDERSTAND THIS MANUAL COMPLETELY BEFORE YOU
ATTEMPT TO INSTALL OR OPERATE THIS UNIT!
• Be sure to save the packing carton in the unlikely event the device
may have to be returned for service.
• Do not spill water or other liquids into or on to the device.
• Be sure that the local power outlet matches the required voltage
for the device.
• Do not open up the device for any reason. There are no user ser-
viceable parts inside.
• Disconnect the device’s main power when left unused for long
periods of time.
• Never connect this device to a dimmer pack.
• Do not attempt to operate this device if it has been damaged in
any way.
• Never operate this device with the cover removed.
• To reduce the risk of electrical shock or fire, do not expose this
device to rain or moisture.
• Do not attempt to operate this device if the power cord has been
frayed or broken.

13
SAFETY GUIDELINES
• Disconnect from main power before making any type of connection.
• Never block the ventilation holes. Always be sure to mount this
device in an area that will allow proper ventilation. Allow about 6”
(15cm) between this device and a wall.
• This unit is intended for indoor use only. Use of this product out-
doors voids all warranties.
• Always mount this unit in a safe and stable matter.
• Please route your power cord out of the way of foot traffic. Power
cords should be routed so they are not likely to be walked on, or
pinched by items placed upon or against them.
• The device should be serviced by qualified service personnel
when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen on, or liquid has been spilled into,
the device.
C. The device has been exposed to rain or water.
D. The unit does not appear to operate normally or exhib-
its a marked change in performance.
Keep flammable materials away from this fixture!
DEVICE IS DESIGNED FOR INDOOR USE ONLY! DO NOT
EXPOSE TO RAIN OR MOISTURE!

14
INSTALLATION
FLAMMABLE MATERIAL WARNING
Keep fixture minimum 5.0 feet (1.5m) away from flam-
mable materials and/or pyrotechnics.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical
connections and/or installations.
DO NOT INSTALL THE DEVICE IF YOU ARE NOT QUALIFIED
TO DO SO!
• Device MUST be installed following all local, national, and country
commercial electrical and construction codes and regulations.
• Place device only on flat, stable surfaces.
• Device(s) should be installed outside walking paths, seating areas,
or areas were unauthorized personnel might reach the fixture by
hand.
THIS DEVICE IS RATED ONLY FOR INDOOR USAGE! DO
NOT EXPOSE THIS DEVICE TO RAIN AND/OR MOISTURE,
AS DOING SO WILL DAMAGE THE DEVICE AND VOID THE
MANUFACTURER’S WARRANTY!

15
To use this device, simply place it on a flat, level surface in a dry or
indoor location. Connect the included power supply to the power
inlet port on the side of the device, and connect the power supply
to a power outlet (below left). Then simply dock your ADJ Mirage
Q IP fixture onto the Mirage Q IPCB device, making sure that the
charging ports fit together tightly (below right). The Mirage Q IP
lighting fixture will now begin to charge.
An LED indicator located on the Mirage Q IP lighting fixture will illu-
minate red to indicate that the unit is now being being charged. This
LED changes to green when charging is complete. It is advised to
disconnect the fixture from the charging base when charging is
complete, in order to avoid unnecessary wear on the battery.
OPERATION
Power
Supply Power
Supply

16
DISCONNECT POWER BEFORE PERFORMING ANY
MAINTENANCE!
CLEANING
Clean periodically with a soft cloth to avoid dirt/debris accumula-
tion.
NEVER use alcohol, solvents, or ammonia-based cleaners.
MAINTENANCE
Regular inspections are recommended to ensure proper function
and extended life. There are no user serviceable parts inside this
device. Please refer all other service issues to an authorized ADJ
service technician. Should you need any spare parts, please order
genuine parts from your local ADJ dealer.
NEVER remove the ground prong from the power cable.
CLEANING AND MAINTENANCE

17
CLEANING AND MAINTENANCE
Please refer to the following points during routine inspections:
• A detailed electrical check by an approved electrical engineer
every three months, to make sure the circuit contacts are in good
condition and prevent overheating.
• Be sure all screws and fasteners are securely tightened at all
times. Loose screws may fall out during normal operation, result-
ing in damage or injury as larger parts could fall.
• Check for any deformations on the housing, as these could allow
for dust or liquids to enter into the fixture.
• Electric power supply cables must not show any damage, material
fatigue, or sediments.

18
DIMENSIONAL DRAWINGS
5.3in (134.7mm)
5.1in (130.8mm)
1.5in
(37.0mm)
2.0in
(52.0mm)
Images are not drawn to scale.

19
Model Name: ADJ Mirage Q IPCB
Compatible Device: ADJ Mirage Q IP
Voltage: DC 17.3V, 3A (wall power supply)
Dimensions: 5.3” x 5.1” x 2.0”
134.7mm x 130.8mm x 52.0mm
Installation: Indoor or dry locations only
Approvals: UL-approved power supply
SPECIFICATIONS