Adobe sony User manual

GETTING STARTED WITH
FLASH®LITE™1. x

© 2007 Adobe Systems Incorporated. All rights reserved.
Getting Started with Flash® Lite™ 1.x
If this guide is distributed with software that includes an end user agreement, this guide, as well as the software described in it, is
furnished under license and may be used or copied only in accordance with the terms of such license. Except as permitted by any
such license, no part of this guide may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, recording, or otherwise, without the prior written permission of Adobe Systems Incorporated. Please note
that the content in this guide is protected under copyright law even if it is not distributed with software that includes an end user
license agreement.
The content of this guide is furnished for informational use only, is subject to change without notice, and should not be
construed as a commitment by Adobe Systems Incorporated. Adobe Systems Incorporated assumes no responsibility or liability
for any errors or inaccuracies that may appear in the informational content contained in this guide.
Please remember that existing artwork or images that you may want to include in your project may be protected under copyright
law. The unauthorized incorporation of such material into your new work could be a violation of the rights of the copyright
owner. Please be sure to obtain any permission required from the copyright owner.
Any references to company names in sample templates are for demonstration purposes only and are not intended to refer to any
actual organization.
Adobe, the Adobe logo, Flash Lite, and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in
the United States and/or other countries.
Third-Party Information
This guide contains links to third-party websites that are not under the control of Adobe Systems Incorporated, and Adobe
Systems Incorporated is not responsible for the content on any linked site. If you access a third-party website mentioned in this
guide, then you do so at your own risk. Adobe Systems Incorporated provides these links only as a convenience, and the inclusion
of the link does not imply that Adobe Systems Incorporated endorses or accepts any responsibility for the content on those third-
party sites.
Sorenson™ Spark™ video compression and decompression technology licensed from
Sorenson Media, Inc.
Fraunhofer-IIS/Thomson Multimedia: MPEG Layer-3 audio compression technology licensed by
Fraunhofer IIS and Thomson Multimedia (http://www.iis.fhg.de/amm/).
Independent JPEG Group: This software is based in part on the work of the Independent JPEG Group.
Nellymoser, Inc.: Speech compression and decompression technology licensed by Nellymoser, Inc. (http:www.nelly-moser.com).
Opera ® browser Copyright © 1995-2002 Opera Software ASA and its suppliers. All rights reserved.
Macromedia Flash 8 video is powered by On2 TrueMotion video technology. © 1992-2005 On2 Technologies, Inc. All Rights
Reserved. http://www.on2.com.
Visual SourceSafe is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Updated Information/Additional Third Party Code Information available at http://www.adobe.com/go/thirdparty/.
Adobe Systems Incorporated, 345 Park Avenue, San Jose, California 95110, USA.
Notice to U.S. Government End Users. The Software and Documentation are “Commercial Items,” as that term is defined at 48
C.F.R. §2.101, consisting of “Commercial Computer Software” and “Commercial Computer Software Documentation,” as such
terms are used in 48 C.F.R. §12.212 or 48 C.F.R. §227.7202, as applicable. Consistent with 48 C.F.R. §12.212 or 48 C.F.R.
§§227.7202-1 through 227.7202-4, as applicable, the Commercial Computer Software and Commercial Computer Software
Documentation are being licensed to U.S. Government end users (a) only as Commercial Items and (b) with only those rights as
are granted to all other end users pursuant to the terms and conditions herein. Unpublished-rights reserved under the copyright

laws of the United States. Adobe Systems Incorporated, 345 Park Avenue, San Jose, CA 95110-2704, USA. For U.S.
Government End Users, Adobe agrees to comply with all applicable equal opportunity laws including, if appropriate, the
provisions of Executive Order 11246, as amended, Section 402 of the Vietnam Era Veterans Readjustment Assistance Act of
1974 (38 USC 4212), and Section 503 of the Rehabilitation Act of 1973, as amended, and the regulations at 41 CFR Parts 60-1
through 60-60, 60-250, and 60-741. The affirmative action clause and regulations contained in the preceding sentence shall be
incorporated by reference.

5
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
What’s new in Flash Lite authoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Guide to instructional media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Additional resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Typographical conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Chapter 1: Flash Lite Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
About Flash Lite technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Flash Lite 1.x availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
About Flash Lite content types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Workflow for authoring Flash Lite applications . . . . . . . . . . . . . . . . . . . . 14
Flash Lite authoring features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using Flash Lite document templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Hello World Flash Lite application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
About the stand-alone Flash Lite player . . . . . . . . . . . . . . . . . . . . . . . . . 20
Chapter 2: Creating a Flash Lite Application. . . . . . . . . . . . . . . . . 21
Café application overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Viewing the completed application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Creating the application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

6

7
Introduction
This manual provides an introduction to Macromedia® Flash® Lite™ 1.x
from Adobe and describes how to test your content using the Adobe®
Device Central CS3 emulator, which is part of Adobe® Flash® CS3
Professional. The primary difference between using Flash Lite in Flash CS3
and in previous versions of Flash is that the Flash Lite emulator is now part
of Device Central. See the Device Central documentation for more
information.
What’s new in Flash Lite
authoring
Flash includes the following new features to help developers create Flash
Lite applications:
Adobe® Device Central emulator Adobe Device Central includes an
emulator that lets you preview your content as it will function on an actual
device. The emulator can configure itself to mimic the features available on
any supported device. The emulator also provides debugging information
that alerts you to potential problems and incompatibilities on the target
device.
Device Settings Adobe Device Central lets you select your test devices
and Flash Lite content type. When you test your content in the Device
Central emulator, you can choose the test device you want the emulator to
mimic.
Device document templates Adobe Flash CS3 Professional includes
document templates to let you quickly start creating content for specific
devices and content types.

8Introduction
Guide to instructional media
The Flash Lite documentation package includes the following media to
help you learn how to create Flash Lite applications:
■Getting Started with Flash Lite 1.x provides an overview of Flash Lite 1.x
technology and developing Flash Lite content for mobile devices. It
also includes a step-by-step tutorial for creating a Flash Lite 1.x
application.
■Developing Flash Lite 1.x Applications is a comprehensive guide to
creating Flash Lite content, and includes instructions for testing your
applications in Adobe Device Central.
■Flash Lite 1.x ActionScript Language Reference describes all the
ActionScript language features available to Flash Lite developers, and
provides example code.
■Learning Flash Lite 1.x ActionScript complements the language
reference and provides additional code examples and an introduction to
writing Flash 4 ActionScript, upon which Flash Lite 1.x ActionScript
is based.
■The Flash Lite sample applications at www.adobe.com/go/
learn_flt_samples_and_tutorials demonstrate key concepts and best
practices discussed or mentioned in the written documentation.

Typographical conventions 9
Additional resources
For the latest information on developing Flash Lite applications, plus
advice from expert users, advanced topics, examples, tips, and other
updates, see the Mobile and Devices Developer Center at www.adobe.com/
go/developer_flashlite.
For TechNotes, documentation updates, and links to additional resources
in the Flash Lite developer community, see the Adobe Flash Lite Support
Center at www.adobe.com/go/support_flashlite.
Typographical conventions
The following typographical conventions are used in this book:
■Italic font indicates a value that should be replaced (for example, in a
folder path).
■Code font indicates ActionScript code.
■Code font italic indicates an ActionScript parameter.
■Bold font indicates a verbatim entry.
■Double quotation marks ("") in code examples indicate delimited
strings. However, programmers can also use single quotation marks.

10 Introduction

11
1
CHAPTER 1
Flash Lite Overview
This chapter contains the following topics:
About Flash Lite technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Flash Lite 1.x availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
About Flash Lite content types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Workflow for authoring Flash Lite applications. . . . . . . . . . . . . . . . 14
Flash Lite authoring features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using Flash Lite document templates. . . . . . . . . . . . . . . . . . . . . . . . 16
Hello World Flash Lite application . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
About the stand-alone Flash Lite player . . . . . . . . . . . . . . . . . . . . . . 20
About Flash Lite technology
Macromedia Flash Lite from Adobe is a version of Adobe Flash Player
designed for mobile devices. It balances Flash features and capabilities with
the processing power and configurations of today’s mass market mobile
devices. There are currently two versions of Flash Lite 1: Flash Lite 1.0 and
Flash Lite 1.1, collectively known as Flash Lite 1.x. Flash Lite 1.x consists
of the following features:
The core rendering engine The rendering engine handles all vector and
bitmap rendering.
ActionScript interpreter Flash Lite supports the version of the
ActionScript language used in Macromedia® Flash® Player 4 from Adobe,
including many mobile-specific commands, such as getting time and date
information from the device. This hybrid of Flash Player 4 ActionScript
and commands with properties specific to Flash Lite is collectively called
Flash Lite 1.x ActionScript.
For more information about Flash Lite 1.x ActionScript, see Flash Lite 1.x
ActionScript Language Reference and Learning Flash Lite 1.x ActionScript.

12 Flash Lite Overview
Text and fonts Flash Lite supports static, dynamic, and input text fields.
You can use fonts that are available on the device or embed font data in
your published SWF file. For more information about using text and fonts
in Flash Lite, see Chapter 2, “Working with Text and Fonts” in Developing
Flash Lite 1.x Applications.
Sound Flash Lite 1.0 and Flash Lite 1.1 both support device audio
formats (such as MIDI or MFi). Flash Lite 1.1 also supports standard Flash
audio. For more information about working with sound in Flash Lite, see
Chapter 3, “Working with Sound” in Developing Flash Lite 1.x
Applications.
Network connectivity Flash Lite 1.1 supports the ability to load external
data and SWF files, as well as commands and properties for getting
connectivity and HTTP request status information.
Device and platform integration Flash Lite provides access to several
system features and commands, such as the ability to initiate phone calls
and short message service (SMS) messages, get platform capability
information, and get user input using the device’s standard input
dialog box.
Flash Lite 1.x availability
Flash Lite 1.0 and Flash Lite 1.1 are supported on a variety of mobile
devices that are available in a number of different geographic regions and
markets. Some of these devices are available globally, while others are
available only in specific geographic regions or from specific mobile
operators. Some devices come with Flash Lite pre-installed from the device
manufacturer or mobile operator, while on others it can be installed
after purchase.
For the most current list of devices that support Flash Lite, see the
Supported Devices page located at www.adobe.com/go/
mobile_supported_devices/.

About Flash Lite content types 13
Globally available devices that support Flash Lite include the Symbian
Series 60-based devices from Nokia, Sendo, and Seimens, and the Symbian
UIQ-based devices from Sony-Ericcson. As of this writing, all globally
available devices support only the stand-alone Flash Lite player. The stand-
alone player installs as a “top-level” application that a user can start from
the device’s application menu (just like a text messaging application or a
mobile web browser, for example). For more information about the stand-
alone Flash Lite player, see “About the stand-alone Flash Lite player”
on page 20.
As of this writing, the Flash Lite stand-alone player is not pre-installed on
any globally available devices. You can purchase the stand-alone player for
development purposes from the Adobe online store at www.adobe.com/go/
store.
Regionally available devices that support Flash Lite comprise a larger
group of devices than are available globally. As of this writing, these devices
are available primarily in Japan and come with Flash Lite pre-installed. On
these devices, Flash Lite enables several different types of content, such as
Flash screen savers or animated ring tones. For more information about
Flash Lite content types, see “About Flash Lite content types” on page 13.
About Flash Lite content types
Before you start developing a Flash Lite application, you need to know
the following:
■The device or devices on which the content will be running, or target
devices. The Flash Lite player is installed on a variety of devices. For a
full list of devices with Flash Lite installed, see the Supported Devices
page on the Adobe website at www.adobe.com/go/
mobile_supported_devices.
■The Flash Lite content types supported by the target devices. Each
Flash Lite installation supports one or more application modes, or
content types. For example, some devices use Flash Lite to enable Flash-
based screen savers or animated ring tones. Others use Flash Lite to
render Flash content that is embedded in mobile web pages. Not all
content types support all Flash Lite features.

14 Flash Lite Overview
Each Flash Lite content type, paired with a specific device, defines a
specific set of Flash Lite features that are available to your application. For
example, a Flash application that's running as a screen saver is not typically
allowed to make network connections or download data.
The Flash Lite testing features in Flash let you test against multiple devices
and different Flash Lite content types. This lets you determine if your
application uses features that aren't available for the type of content that
you are developing. For more information about selecting target devices
and content types, see Chapter 5, “Testing Flash Lite Content” in
Developing Flash Lite 1.x Applications.
Workflow for authoring Flash
Lite applications
The process for creating Flash Lite content is an iterative one that involves
the following steps:
Identify your target device(s) and Flash Lite content type Different
devices have different screen sizes, support different audio formats, and
have different screen color depths, among other factors. These factors may
influence your application’s design or implementation.
In addition, different devices support different Flash Lite content types,
such as screen savers, stand-alone applications, or animated ring tones. The
content type for which you are developing also determines the features that
are available to your application. For more information about Flash Lite
content types, see “About Flash Lite content types” on page 13.
Create and test your application in Flash Adobe Flash CS3
Professionalincludes an emulator available on Adobe Device Central CS3,
which lets you test your application without having to transfer it to a
device. You use the emulator to refine your application design and fix any
problems before you test it on a mobile device.
Test the application on your target device or devices This step is
important because the emulator doesn’t emulate all aspects of the target
device. For instance, a color gradient that appears smooth in the emulator
may appear banded when viewed on the actual device. After testing your
application on a device, you may find that you need to refine the
application’s design in the Flash authoring tool.

Flash Lite authoring features 15
The following figure illustrates the iterative development and testing
process described above.
Flash Lite authoring features
This section discusses the features in Flash designed specifically for Flash
Lite developers. With the exception of the device templates feature, the
following features are only available when your document’s Version setting
on the Flash tab of the Publish Setting dialog box is set to either Flash Lite
1.0 or Flash Lite 1.1. For information on how to specify your document’s
SWF version, see “Setting publish options for the Flash SWF file format”
in Using Flash.
Adobe Device Central lets you test your content as it will run and appear
on an actual device. It also lets you select a different test device, view
information about your application, and set emulator debug output
options. Different devices support different media types (for example,
different types of device sound formats) as well as different Flash Lite
content types, such as stand-alone player, screensaver, or browser. When
you preview your application, the emulator mimics the features available to
the selected test device running as the selected content type.
For more information about Flash Lite content types, see “About Flash Lite
content types” on page 13.
Editing the FLA file in Adobe
Flash CS3
Testing in the Adobe Device
Central emulator
Testing on a device

16 Flash Lite Overview
The Property inspector contains a section that provides information
about your current device settings, as well as a button that lets you open
the Device Settings dialog box. This button is active only when your
document’s Version setting on the Flash tab of the Publish Setting dialog
box is set to Flash Lite 1.0 or Flash Lite 1.1.
Document templates provide a starting point for you to create different
types of Flash Lite content for different categories of devices. For more
information, see “Using Flash Lite document templates” on page 16.
Using Flash Lite document
templates
Flash includes several templates that provide starting points for creating
Flash Lite content for various devices and content types. When you create a
new document from one of the Flash Lite templates, your document is
preconfigured with the proper Stage size, publish settings, and device
settings for the device type that you specify. In some cases, you may need to
adjust the Stage size from the default dimensions for your target device.
The first step in most of the examples and sample applications in this
documentation is to create a new document from one of the Flash Lite
document templates.
Device Settings button Current content type and test device

Using Flash Lite document templates 17
As the following figure shows, Flash Lite document templates are organized
into several groups, including Global Handsets and Japanese Handsets.
The name of each template in each group includes the target device name
and screen size.
The Global Handsets category contains templates for creating full-screen
applications for the stand-alone Flash Lite 1.1 player on Series 60 and UIQ
platforms. The Japanese Handsets category contains templates for creating
content for devices available in the Japanese market. For more information
about Flash Lite availability in global and regional markets, see “Flash Lite
1.x availability” on page 12.
To create a new document from a Flash Lite template:
1. In Flash, select File > New.
2. Select the Templates tab in the New Document dialog box.
3. Select a category from the list of categories:
■Select Global Phones if you’re developing a Flash Lite application
for a phone available globally.
■Select Japanese Phones if you’re developing an application for a
phone only available in the Japanese market.
4. Select a template from the list of templates.
5. Click OK to close the New Document dialog box.

18 Flash Lite Overview
Hello World Flash Lite
application
In this section, you create a simple Flash Lite application and test it in the
Adobe Device Central emulator. The purpose of this tutorial is to acquaint
you with the mobile authoring and testing features in Adobe Flash CS3
Professional as well as the general workflow for creating Flash Lite content.
For a more complete sample application, see Chapter 2, “Creating a Flash
Lite Application,” on page 21.
First, you need to decide which devices and Flash Lite content type you are
targeting. For the purposes of this tutorial, we’ll assume that you’re
developing content for the Flash Lite 1.1 stand-alone player on the Series
60 devices from Nokia. All of the supported Nokia Series 60 devices have
the same available Stage size (176 x 208 pixels), so in theory, the same
application (SWF file) will run on all of those devices.
To begin development, you first need to configure your Flash document’s
publish settings, document settings, and device settings for the target
device and content type. You can do this manually using a new blank
document, or you can use a Flash Lite template (see “Using Flash Lite
document templates” on page 16) to create a new document that’s
preconfigured with the proper settings for your target device and content
type. The following procedure explains how to create a simple Hello World
application.
To configure and create a simple Flash Lite application:
1. Start Flash.
2. On the main Flash screen, select Create New > Flash Mobile
Document. Flash opens Adobe Device Central and displays the New
Document tab.
3. In Device Central, select FlashLite 1.1 in the Player Version box,
ActionScript 2.0 in the ActionScript Version box, and Standalone
Player in the Content Type box.
4. Click Custom Size for All Selected Devices at the bottom of the screen.
This allows you to create content for the stand-alone Flash Lite player.
5. Click Create. You are returned to Flash, which creates a new document
with preset publish settings and (when you specify a device) the correct
size for the device you selected.

Hello World Flash Lite application 19
6. In the Tools panel, select the Text tool and drag to create a text box on
the Stage.
Type Hello, world! (or other text) in the text box.
7. Select Control > Test Movie to export your application to Adobe Device
Central and view your application in the Adobe Device Central
emulator.
Note: During testing in Device Central, you can change the device
and content type to see your application on a different platform. To
do this, double-click a device in the Available Devices panel and
select a new content type from Content Type. When you return to
Flash, Flash remembers the settings you last used in the emulator.
8. To return to Flash, select File > Return to Flash.Select Control > Test
Movie to view your application in the Adobe Device Central emulator.

20 Flash Lite Overview
About the stand-alone Flash Lite
player
The stand-alone Flash Lite 1.1 player is an application that allows you to
open and view SWF files that reside on your device’s memory card, that
you browse to in your device’s mobile web browser, or that you receive in
your device’s messaging in-box over Bluetooth® wireless technology or an
infrared connection.
As of this writing, the stand-alone player is available globally for the
following platforms and devices:
Series 60 platform:
■Nokia 3600, 3620, 3650, 3660, 6260, 6600, 6620, 6630, 6670, 6680,
6681, 7610, N-Gage, N-Gage QD
■Sendo X
■Siemens SX1
UIQ platform:
■Sony Ericsson P900, P910
If you’re a developer, you can purchase the stand-alone Flash Lite 1.1 player
for these supported devices from the Adobe online store at
www.adobe.com/go/store. For a list of commonly asked questions about
purchasing the stand-alone player, see the Flash Lite 1.1 FAQ at
www.adobe.com/go/bb660cc2/. For help installing the player, see
TechNote 4632f5aa at www.adobe.com/go/4632f5aa.