MIO-2261 Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1. 1 MIO-2261 SBC
2. 1 Startup Manual
3. 1 Utility CD (including user manual and drivers)
4. 1 SATA cable p/n: 1700006291
5. 1 Audio cable p/n: 1700019156
6. 1 COM cable p/n: 1701200220
7. 1 SATA Power cable p/n: 1700019656
8. 1 USB cable p/n: 1700002172
9. 1 AT power cable p/n: 1700019705
10. 1 Heatsink p/n: 1960055792T001
11. Screw and stud pack (1 screw
for Mini PCIe, 4 M3 studs and
screws for heatsink) p/n: 9666226000E
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note 1: For detailed contents of MIO-2261, please refer
to information on the enclosed CD-ROM (in PDF
format).
Note 2: Acrobat Reader is required to view any PDF
file. Acrobat Reader can be downloaded at:
http://get.adobe.com/reader/ (Acrobat is a trade-
mark of Adobe)
MIO-2261 Intel®AtomTM N2600/ N2800 Pico-ITX SBC,
DDR3, 18/24-bit LVDS, VGA, 1 GbE, Half-size Mini
PCIe, 4 USB, 2 COM, SMBus, I2C, mSATA & MIOe
Startup Manual
General
• CPU: Intel®Atom™ Dual Core 1.6 GHz (N2600) /
1.86 GHz (N2800)
• System Chipset: Intel® Atom™ N2600/ N2800 + NM10
• System Memory: 1 x 204-pin SODIMM socket DDR3 800
MHz (N2600) /1066 MHz (N2800), up to 4 GB
• L2 Catch: 1 MB on die
• BIOS: AMI EFI 16 Mbit Flash ROM
• Watchdog Timer: 255 level interval timer
• Battery: Lithium 3 V/210 mAH
Note: How to clear CMOS (Must follow steps below):
1. Turn off system power.
2. Unplug CR2032 battery cable on BH1.
3. Waiting for 15sec or short BH1 pin1-2.
4. Connect battery cable on BH1.
5. Turn on system power.
• Serial ATA: One SATA II interface, up to 300 MB/s
• USB: Four USB 2.0 compliant ports
• Audio: High definition audio (HD), line-in, line-out
• GPIO: 8-bit general purpose input/output
• Expansion Interface: Half size Mini PCIe, MIOe
MIOe Expansion Slot
• Interface: 2 x USB 2.0, 2 x PCIe x1, LPC, HD Audio
line-out, SMBus, DP or HDMI supported by request, 5
Vsb/12 Vsb
• Total peripheral power supply output: 5 V @ 3 A for
CPU board and MI/O Extension module totally, 12 V @ 2
A for MI/O Extension module
VGA/LVDS Interface
• Controller: Intel®N2600 / N2800, DirectX 9 and
OpenGL3.0 support
• Output Interfaces:
- VGA: Up to 1920 x 1200 (WUXGA)
- LVDS: Single channel 18/24-bit LVDS,
up to 1366 x 768 (WXGA)
- Dual Display: CRT + LVDS
Ethernet Interface
• Support single 10/100/1000 Mbps Ethernet interface
• Controller: Intel® 82583V (GbE1)
Specications Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://service.advantech.com.tw/support/
This manual is for the MIO-2261 Series Rev. A1
Part No. 2006226100
Printed in China
1st Edition
June 2012
