Advantech PCM-3375 User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

PCM-3375
VIA Mark SBC with CFC, USB,
LAN, LPT, COM, PC/104 CPU
User Manual

PCM-3375 User Manual ii
Copyright
This document is copyrighted, © 2006. All rights are reserved. The origi-
nal manufacturer reserves the right to make improvements to the products
described in this manual at any time without notice.
No part of this manual may be reproduced, copied, translated or transmit-
ted in any form or by any means without the prior written permission of
the original manufacturer. Information provided in this manual is
intended to be accurate and reliable. However, the original manufacturer
assumes no responsibility for its use, nor for any infringements upon the
rights of third parties that may result from such use.
Acknowledgements
Award is a trademark of Award Software International, Inc.
IBM, PC/AT, PS/2 and VGA are trademarks of International Business
Machines Corporation.
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
RTL is a trademark of Realtek Semi-Conductor Co., Ltd.
ESS is a trademark of ESS Technology, Inc.
Creative is a trademark of Creative Technology LTD.
All other product names or trademarks are properties of their respective
owners.
For more information on this and other Advantech products, please visit
our websites at: http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our support website at:
http://www.advantech.com/support
This manual is for the PCM-3375.
Part No. 2006337512
3rd Edition
June 2008

iii
Packing List
Before you begin installing your card, please make sure that the following
materials have been shipped:
• 1 PCM-3375 all-in-one single board computer
• 1 CD disk for utility and drivers
• 1 startup manual
• 1 PS/2 Keyboard & Mouse cable (p/n: 1700060202)
• 2 Serial port cables (p/n: 1700100250)
• 1 Y-cable external cable (p/n: 1703060053)
• 1 Parallel cable (p/n: 1700260250)
• 1 26-34 pin FDD cable converter (p/n: 9681000044)
• 1 Floppy cable for 3.5” FDD only (p/n: 1701340700)
• 1 FDD flat cable (p/n: 1906000001)
• 1 VGA cable (p/n: 1701160150)
• 1 LAN cable (p/n: 1701100202)
If any of these items are missing or damaged, contact your distributor or
sales representative immediately.
Model No. List Description
PCM-3375F-L0A1E PC104 SBC w/VIA Mark 533, LVDS,
2COM, 2USB, LAN, RoHS

PCM-3375 User Manual iv
FCC
This device complies with the requirements in part 15 of the
FCC rules: Operation is subject to the following two condi-
tions:
1.This device may not cause harmful interference, and
2. This device must accept any interference received, includ-
ing interference that may cause undesired operation
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio commu-
nications. Operation of this device in a residential area is
likely to cause harmful interference in which case the user will
be required to correct the interference at his/her own
expense. The user is advised that any equipment changes or
modifications not expressly approved by the party responsi-
ble for compliance would void the compliance to FCC regula-
tions and therefore, the user's authority to operate the
equipment.
Caution!
Achtung!
There is a danger of a new battery exploding if it is incorrectly
installed. Do not attempt to recharge, force open, or heat the
battery. Replace the battery only with the same or equivalent
type recommended by the manufacturer. Discard used batter-
ies according to the manufacturer’s instructions.

v
Additional Information and Assistance
1. Visit the Advantech web site at www.advantech.com where you can
find the latest information about the product.
2. Contact your distributor, sales representative, or Advantech's customer
service center for technical support if you need additional assistance.
Please have the following information ready before you call:
• Product name and serial number
• Description of your peripheral attachments
• Description of your software (operating system, version, application
software, etc.)
• A complete description of the problem
• The exact wording of any error messages

PCM-3375 User Manual vi

vii
Contents
Chapter 1 General Information........................................2
1.1 Introduction....................................................................... 2
1.2 Features ............................................................................. 2
1.3 Specifications.................................................................... 2
1.4 Board layout: dimensions.................................................. 4
Figure 1.1:Board layout: dimension (component side) ..4
Figure 1.2:Board layout: dimension (solder side) ..........5
Chapter 2 Installation........................................................8
2.1 Jumpers.............................................................................. 8
Table 2.1:Jumpers...........................................................8
2.2 Connectors......................................................................... 8
Table 2.2:Connectors...................................................... 8
2.3 Locating Connectors ....................................................... 10
Figure 2.1:Jumper & Connector (component side) ......10
Figure 2.2:Jumper & Connector (solder side) .............. 10
2.4 Setting Jumpers ............................................................... 11
2.5 Installing SO-DIMMs ..................................................... 11
2.6 IDE, CDROM hard drive connector (CN7).................... 12
2.6.1 Connecting the hard drive.............................................12
2.7 Solid State Disk............................................................... 13
2.7.1 CompactFlash (CN18)..................................................13
2.8 Keyboard and PS/2 mouse connector (CN14) ................ 13
2.9 Power connectors (CN12)............................................... 13
2.9.1 AT power connector, +5V (CN12)...............................13
2.10 COM port connector (CN17) .......................................... 13
2.11 CRT/LVDS/TTL interface connections (CN10, CN6, CN3)
13 2.11.1 CRT display connector (CN10)....................................14
2.11.2 LVDS connector (CN6)................................................ 14
2.11.3 LVDS Power Select (J2)...............................................14
Table 2.3:LVDS Power Select (J2)............................... 14
2.12 Ethernet configuration (CN1).......................................... 14
2.13 USB connectors (CN2).................................................... 14
Chapter 3 Award BIOS Setup.........................................16
3.1 System test and initialization........................................... 16
3.1.1 System configuration verification................................. 16
3.2 Award BIOS setup .......................................................... 17
3.2.1 Entering setup .............................................................. 17
Figure 3.1:BIOS setup program initial screen .............. 17

PCM-3375 User Manual viii
3.2.2 Standard CMOS Features setup.................................... 18
Figure 3.2:CMOS Features setup.................................. 18
3.2.3 Advanced BIOS Features setup.................................... 19
Figure 3.3:Advanced BIOS Features setup...................19
3.2.4 Advanced Chipset Features setup................................. 20
Figure 3.4:Advanced Chipset Features setup ............... 20
3.2.5 Integrated Peripherals ................................................... 21
Figure 3.5:Integrated Peripherals.................................. 21
3.2.6 Power Management Setup............................................ 22
Figure 3.6:Power Management Setup...........................22
3.2.7 PnP/PCI Configurations................................................ 23
Figure 3.7:PnP/PCI Configurations.............................. 23
3.2.8 Load Optimized Defaults.............................................. 24
3.2.9 Set Password................................................................. 24
Figure 3.8:To Establish Password ................................ 25
3.2.10 Save & Exit Setup......................................................... 26
3.2.11 Exit Without Saving...................................................... 26
Figure 3.9:Exit Without Saving.................................... 26
Chapter 4 AGP 4X Setup.................................................28
4.1 Introduction..................................................................... 28
4.1.1 Chipset .......................................................................... 28
4.1.2 Display memory............................................................ 28
4.1.3 Display types................................................................. 28
4.1.4 Dual/Simultaneous Display .......................................... 28
Figure 4.1:Selecting Display Settings...........................29
4.2 Installation of the SVGA Driver ..................................... 30
4.2.1 Installation for Windows 95 ......................................... 30
4.2.2 Installation for Windows 98/Me................................... 34
4.2.3 Installation for Windows NT........................................ 39
4.2.4 Installation for Windows 2000 ..................................... 44
4.2.5 Installation for Windows XP ........................................ 49
4.3 Further Information......................................................... 55
Chapter 5 Ethernet Interface..........................................58
5.1 Introduction..................................................................... 58
5.2 Installation of the Ethernet driver....................................58
5.2.1 Installation for Windows 98 ......................................... 58
5.2.2 Installation for Windows 2000 ..................................... 62
5.3 Further information ......................................................... 67
Appendix A Programming Watchdog Timer....................70
A.1 Watchdog programming.................................................. 70
Appendix B Pin Assignments .............................................72
B.1 LAN Connector (CN1) .............................................. 72
Table B.1: LAN Connector (CN1) ...............................72

ix
B.2 USB 1/2 Connector (CN2) ......................................... 72
Table B.2: USB 1/2 Connector (CN2)..........................72
B.3 FPD Connector (TTL) (CN3)..................................... 73
Table B.3:FPD Connector (TTL) (CN3) ...................... 73
B.4 LCD Signal Mapping...................................................... 74
B.5 RS422/485 Connector (CN4).......................................... 75
Table B.5:RS422/485 Connector (CN4)....................... 75
B.6 COM1 RS232 Connector (CN5)................................. 75
Table B.6: COM1 RS232 Connector (CN5)................. 75
B.7 FPD Connector (LVDS) (CN6)....................................... 76
Table B.7: FPD Connector (LVDS)(CN6)................... 76
B.8 Primary IDE Connector (CN7) ................................... 77
Table B.8: Primary IDE Connector (CN7)................... 77
B.9 COM2 RS232 Connector (CN8)................................. 78
Table B.9: COM2 RS232 Connector (CN8)................. 78
B.10 VGA Connector (CN10) ................................................. 78
Table B.10:VGA Connector (CN10)............................ 78
B.11 LPT Connector (CN11)................................................... 79
Table B.11:LPT Connector (CN11).............................. 79
B.12 Power input Connector (CN12) .................................. 79
Table B.12:Power input Connector (CN12)................. 79
B.13 SM-BUS Connector (CN13)........................................... 80
Table B.13:SM-BUS Connector (CN13)...................... 80
B.14 KB_MS Connector (CN14)........................................ 80
Table B.14:KB_MS Connector (CN14) .......................80
B.15 System FAN Connector (CN15) ................................. 80
Table B.15:System FAN Connector (CN15)................80
B.16 Multi-function Connector (CN16) .................................. 81
B.17 FDD Connector (CN17).................................................. 82
Table B.17:FDD Connector (CN17).............................82
B.18 CompactFlash Connector (CN18)................................... 83
Table B.18:CompactFlash Connector (CN18).............. 83
B.19 Battery Connector (CN20) ......................................... 84
Table B.19:Battery Connector (CN20)......................... 84
Appendix C System Assignments......................................86
C.1 System I/O Ports.............................................................. 86
Table C.1:System I/O Ports .......................................... 86
C.2 1st MB memory map....................................................... 87
Table C.2:1st MB memory map ................................... 87
C.3 DMA channel assignments.............................................. 87
Table C.3:DMA channel assignments .......................... 87
C.4 Interrupt assignments ...................................................... 88
Table C.4:Interrupt assignments................................... 88

PCM-3375 User Manual x
Appendix D Mechanical Drawings.....................................90
D.1 Mechanical Drawings...................................................... 90
Figure D.1:PCM-3375 Mech Drawing (component side)
90
Figure D.2:PCM-3375 Mech Drawing (solder side).... 90

1 Chapter1
1
General Information
This chapter gives background
information on PCM-3375.
Sections include:
• Introduction
• Features
• Specifications
• Board layout and dimensions
CHAPTER

PCM-3375 User Manual 2
Chapter 1 General Information
1.1 Introduction
The PCM-3375 is a solid, general purpose Single Board Computer (SBC)
to satisfy various industrial and multimedia applications. With onboard
VIA Mark 533MHz CPU, support for 10/100 Base-T LAN and 1 x EIDE,
1 x FDD, 1 x RS-232 and 1 x RS-232/422/485 port, 1 x parallel port, 1 x
KB/MS, 2 x USB 1.1, also supports up to 512MB SDRAM, 1 x 24bit
TTL LCD panel and 2 channel 18-bit LVDS, CRT display function and
ISA interface.
PCM-3375 is a cost effective choice for customers. With a similar I/O
layout as PCM-3350, PCM-3375 will be the best choice to replace PCM-
3350.
1.2 Features
• Embedded VIA Mark 533MHz processor
• Memory up to 512 MB SDRAM
• Supports 10/100Base-T Ethernet
• Supports 2 port Host USB1.1
• Supports dual display CRT + LVDS, CRT + TTL
1.3 Specifications
Standard SBC Functions
• CPU: Embedded VIA Mark 533MHz processor
• BIOS: Award 256 KB Flash memory
• System memory: 144 pin SO-DIMM socket, support up to 512 MB
SDRAM.
• System chipset: VIA VT8606
• 2nd cache memory: 64KB
• Enhanced IDE interface: Enhanced IDE interface supports 2 IDE
devices (1. Master 2. Slave), 1 is for IDE device, the other one is for
CompactFlash PIO mode 3, 4 with Bus Mastering up to 33MB/sec
• Serial ports: One serial RS-232 port, one serial RS-232/422/485 port

3 Chapter1
• Parallel port: One parallel port, supports SPP/EPP/ECP mode
• Keyboard/mouse connector: Wafer Box 6pin connector
• Power management: APM 1.2 compliant
• Watchdog timer: 62-level timer intervals
• USB: Two USB 1.1 compliant host ports
• Expansion: Supports PC/104 ISA module connector
Solid State Disk
• Supports one 50-pin socket for CFC type I, (Type II for optional)
VGA/LCD Interface
• Chipset: VIA “Mark” CoreFusion processor
• Memory Size: 8/16/32 MB frame buffer shares the system memory
• Display mode: CRT Modes: up to 1600 x 1200 x 16bpp
• LCD mode: Supports 1 channel 24-bit LCD Panel (TTL signal)
• LVDS: Supports 2 channel 18-bit LVDS LCD panel
Ethernet interface
• Chipset:
• Intel 82551ER
• Ethernet interface:
• IEEE 802.3u 10/100BASE-T Fast Ethernet compatible
Mechanical and Environmental
• Dimensions: (L x W)96 x 90 mm (3.8” x 3.5”) compliant with PC/104
• Power supply Voltage:AT, +5V +/-5%, +12V +/-5% (+5V only, +12 V
optional for PC104 add on card and LCD inverter)
• Power Requirement:
Max:1.94A@+5V
Average:2.06A@+5V (Mark 533MHz SDRAM
256 MB)
• Operating temperature:0 ~ 60° C (32~140° F)
• Operating Humidity:0% ~ 95% Relative Humidity, non-condensing
• Weight: 0.11 kg (0.24Ib)(with heatsink)

PCM-3375 User Manual 4
1.4 Board layout: dimensions
Figure 1.1: Board layout: dimension (component side)

5 Chapter1
Figure 1.2: Board layout: dimension (solder side)

PCM-3375 User Manual 6

7 Chapter 2 Installation
CHAPTER
2
Installation
This chapter explains the setup proce-
dures of PCM-3375 hardware, includ-
ing instructions on setting jumpers and
connecting peripherals, switches and
indicators. Be sure to read all safety
precautions before you begin the instal-
lation procedure.

PCM-3375 User Manual 8
Chapter 2 Installation
2.1 Jumpers
The PCM-3375 has a number of jumpers that allow you to configure your
system to suit your application. The table below lists the functions of the
various jumpers.
2.2 Connectors
On-board connectors link the PCM-3375 to external devices such as hard
disk drives, a keyboard, or floppy drives. The table below lists the func-
tion of each of the board’s connectors.
Table 2.1: Jumpers
Label Function
J1 Clear CMOS
J2 LVDS Panel Power Select
Table 2.2: Connectors
Label Function
CN1 LAN Connector
CN2 USB 1/2 Connector
CN3 FPD Connector (TTL)
CN4 RS-422/485 Connector (share with COM2)
CN5 COM1 RS232 Connector
CN6 FPD Connector (LVDS)
CN7 Primary IDE Connector
CN8 COM2 RS232 Connector
CN9 PC104 Connector
CN10 VGA Connector
CN11 LPT Connector
CN12 Power input Connector
CN13 SM-BUS Connector
CN14 KB_MS Connector
CN15 System FAN Connector

9 Chapter 2 Installation
CN16 Multi-function Connector
CN17 FDD Connector
CN18 CFC Connector
CN19 Memory Connector
CN20 Battery Connector
Table 2.2: Connectors