Advantek Networks AWN-PCI-54R User manual

Wireless 802.11g, 54Mpbs
PCI Adapter
Quick Installation Guide
Model# AWN-PCI-54R

1. Install the Device
STEP 1: Turn off your computer and remove its cover
STEP 2: Insert the PCI card to an available PCI slot firmly.
STEP 3: Secure this card to the rear of the computer chassis and put back the cover.
STEP 4: Secure the antenna to antenna connector of the card.
STEP 5: Turn on the computer.
2. Install Driver & Utility
STEP 1: Insert Wireless 54Mbps PCI Adapter Installation CD into CD-ROM drive then windows below
will appear. Click Install Driver & Utility to begin device driver installation.
STEP 2: Select the language for this installation from the choices and click OK to continue.
STEP 3: The InstallShield Wizard for Realtek Wireless Network Utility will display, click Next> to
continue.
STEP 4: Select the country domain is authorized to use click Next> to continue.

STEP 5: Click Yes to continue.
STEP 6: Click Finish to complete the software installation

STEP 7: When Utility setup is completed, the Wireless LAN utility’s main page will automatically show
up on your screen. You can refer to the manual in the CD for the detail configuration.
<Hint>
1. For Windows 98SE and ME, you need to restart your system when Utility setup is completed.
2. Windows 98 Second Edition CD is necessary when you install the driver.
3. You can refer to the manual in the provided CD for the detail configuration.