Adventure Kings 120W Folding Solar Blanket User manual

PLEASE READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE USING THE 120W SOLAR BLANKET
120W Monocrystalline
Folding Solar Blanket
USER MANUAL

2
Adventure Kings 120W Folding Solar Blanket

3
Adventure Kings 120W Folding Solar Blanket
Warning & Safety Information
• Keep your solar blanket, controller & battery away from any liquids at all times.
• Keep the solar blanket and controller clean at all times (always check connectors to ensure they’re
free of grit before plugging them in).
• This appliance is not intended to be used by people (including children) with reduced physical or
mental capabilities, or those who are under the influence of drugs or alcohol.
• Do NOT use the solar blanket to charge non-rechargeable batteries. Doing so may result in harm
to the user and/or damage the solar blanket and controller. Only use the provided solar blanket,
regulator and adaptors/ wiring provided in the kit.
• All lead acid batteries produce harmful, explosive gases. The battery should be mounted in a well-
ventilated area, as far as possible from any ignition sources. Do NOT smoke or have a naked flame in
the vicinity of the battery under charge.
• Never tamper with or pull any component of the solar blanket, regulator or wiring apart. If you do so,
you will void the warranty.
• Always store the solar blanket neatly in its bag, protected from the weather and with good ventilation.
• Ensure nothing sharp or heavy could potentially damage the solar blanket during transport, or
storage.
• Only use the solar blanket to charge 12V batteries.
• The Solar Charge Regulator is only suitable for regulating solar modules.
• The Solar Charge Controller is only suitable for lead acid batteries: OPEN, AGM & GEL. The Solar
Blanket & Controller should not be used with nickel metal hydride, lithium ion or other batteries.
• Never connect another charging source to the charge regulator

4
Adventure Kings 120W Folding Solar Blanket
Included in the kit
120W MONOCRYSTALLINE
FOLDING SOLAR BLANKET
1X 4 STAGE PWM (POWER
WIDTH MODULATOR) WITH TWO
ANDERSON CONNECTIONS
1X ANDERSON TO BATTERY
CLIPS CABLE & 4.4M
ANDERSON TO ANDERSON
EXTENSION LEAD

5
Adventure Kings 120W Folding Solar Blanket
Solar Charge Controller Specications
Max Solar Input <50V
Float Charge 13.7V – Default, adjustable
Discharge Stop 10.7V - Default, adjustable
Discharge Reconnect 12.6V - Default, adjustable
USB Output 5V / 3A
Dimensions 150 x 78 x 35 mm
Weight 150g
Solar Blanket Specications
Solar Blanket Type Monocrystalline
Wattage 120W - (120W @ 16.6V)
Voltage 16.6V
Open Circuit Voltage 21.6V
Peak Current Output 7.8A
Regulator Type 3Stage PWM (Power Width Modulator)
Dimensions 330 x 380 x 66 mm
Extension Lead 4.4m

6
Adventure Kings 120W Folding Solar Blanket
UNPACKING YOUR SOLAR BLANKET
• Find a suitable location to unfold the Solar Blanket, away from sharp objects, liquids and other
hazards that could damage your solar blanket. Ensure there is sufficient space for the Solar Blanket
to be spread out fully.
• Whilst unfolding, take care with the panels making sure they do not bend.
CONNECTING/ DISCONNECTING YOUR SOLAR BLANKET TO THE SOLAR CHARGE CONTROLLER
& BATTERY
When connecting the Solar Blanket with the Solar Charge Controller, the order in which you connect the
components is important so that the Solar Charge Controller will show the correct information. Along with
this, connecting the components in the wrong order could damage your controller.
1. First connect the Solar Charger Controller with the lead acid battery. Using the Anderson cables
supplied with the unit.
2. Secondly, connect Solar Charger Controller with the Solar Blanket
3. Finally, connect the load that you are wishing to power off the Solar Blanket.
To disassemble the components, make sure to follow the steps in in the reverse order (3, 2 to 1).
NEVER STORE YOUR SOLAR BLANKET WITH THE BATTERY LEADS CONNECTED TO THE BLANKET.
Using your 120W Folding Solar Blanket

7
Adventure Kings 120W Folding Solar Blanket
WARRANTY PERIOD:
Full 12 month warranty from date of purchase against all manufacturing defects.
WHAT DOES THE WARRANTY COVER?
Under normal usage conditions, this warranty covers:
a. Any defect in design or manufacture which results in the product failing to perform substantially as
described in authorised advertising or literature.
b. We will either repair or replace the product at our discretion providing that the fault is found to have
been caused by a design or manufacturing defect and not misuse or tampering.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to a major failure. The benefits provided
to you as the consumer by this warranty are in addition to other rights and remedies available to you
under the law.
THE WARRANTY DOES NOT COVER:
a. Any damage resulting from improper use
b. Faulty installation or modification made during installation
c. The cost of removing and reinstalling the product
d. Travel and /or other expenses due to customer’s remote location
e. Transport charges and damage in transit. It is your responsibility to deliver and pick up your product,
including any costs associated with the postage of your repair or replacement product. If you do
freight your product we recommend that you insure against loss or damage.
f. Any loss directly or indirectly associated with the product failing to operate.
g. Damage caused by mould, insects, animals, misuse, incorrect operation, adverse weather, accidents
and fair wear and tear
TO MAKE A CLAIM, PLEASE ENSURE YOU RETAIN YOUR SALES RECEIPT OF PURCHASE
CALL 1800 88 39 64
12 MONTH LIMITED
WARRANTY
OUTDOOR SUPACENTRE PTY LTD
2 Stanley St Silverwater NSW, 2128
PHONE: [phone]
www.4wdsupacentre.com.au

PLEASE READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE USING THE 120W SOLAR BLANKET