Aerocool H66F Instruction and safety manual

H66F RGB Hub - Remote Control Function Guide
LED On/Off
Turn FAN LED On/Off
Fan Speed Control
Toggle between PWM and Manual control.
PWM
Pass Fan Speed control to Motherboard BIOS/UEFI (requires compatible PWM fan header)
For more information, please see our PWM Compatibility Guide.
MANUAL
Allows HUB to manually speed up/down fan speed (speed up/down buttons below).
Fan Speed UP: Increase fan speed while in Manual mode
Fan Speed DOWN: Decrease fan speed while in Manual mode

LED Control
Control the LED effects of the ARGB fans connected to the fan hub.
HUB: Allows HUB to manually control the LED Mode, Color, Speed and Brightness of the
connected Fans.(By pressing the Mode, Color, Speed and Brightness control buttons on the
remote)
MOBO: Pass LED control to motherboard ARGB softwares. (ASUS AURA, GIGABYTE
FUSION, MSI Mystic Light and ASRock Polychrome)
Note: Some H66F hubs have the HUB and MOBO function reversed.
LED MODE: Cycle through LED modes
LED Color: Change LED Color for certain LED modes (No function for LED modes
with multiple colors)
LED Speed: Change LED pattern display speed (No function for Static mode)
Special LED Mode
ASTRO: Display ASTRO LED mode
AUTO: Cycle through all LED mode automatically
RAINBOW: Display Rainbow LED mode

LED Brightness: Increase/decrease LED brightness
Increase Brightness
Decrease Brightness
Remote/HUB Pair Lock
Press the lock button 5 times consecutively to pair one remote to one hub.
Example: If you have two H66F remotes, remote 1 and remote 2 can both control the same
hub. By pressing the lock button 5 times consecutively on remote 1 (fan will blink once to
indicate successful pairing), only remote 1 will be able to control the HUB.
Note: We recommend consecutively pressing the lock button more than 5 times until the fan
LED blinks to indicate successful pairing.